Menu
EUR

Deutz-Fahr Agrotron 6.30 tractor parts & technical data

See more than 200 parts for the Deutz-Fahr Agrotron 6.30. The range runs from trailer couplings to lighting and electrics, so the right part is quick to find.

203 parts found for Deutz-Fahr Agrotron 6.30
Show:
GRANIT Turbocharger Deutz-Fahr Agrotron 120-175, TTV 1130-1160
GRANIT
Turbocharger Deutz-Fahr Agrotron 120-175, TTV 1130-1160
€1.686,40 €1.393,72
 
GRANIT Air receiver gasket
GRANIT
Air receiver gasket
€12,40 €10,25
 
Feed pump 2 hole, hole spacing horizontal 78 mm, pulley Ø 102 mm
5%
Feed pump 2 hole, hole spacing horizontal 78 mm, pulley Ø 102 mm
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pulley Ø 102...
€94,04 €77,72 €89,30 €73,80
 
GRANIT Hydraulic pump 32 cm³/rpm., 13 splines Deutz-Fahr Agrotron 106-150
GRANIT
Hydraulic pump 32 cm³/rpm., 13 splines Deutz-Fahr Agrotron 106-150
Drive shaft: Splined shaft SAE, Ø 21.8 Z13. Direction of rotation: Clockwise. Ou...
€1.238,65 €1.023,68
 
GRANIT Replacement key plastic-coated black, lock number 14644
GRANIT
Replacement key plastic-coated black, lock number 14644
Locking number: 14644. Version: Locking no. 14644 <lt>br<gt> To fit: Deutz-Fahr<...
€17,70 €14,63
 
GRANIT Replacement glass 300 x 214 x 3 mm, can be heated, right / left, 12 V
10%
GRANIT
Replacement glass 300 x 214 x 3 mm, can be heated, right / left, 12 V
Dimensions: 300 x 214 x 3 mm. Version: Can be heated. Installation location: Rig...
€70,52 €58,28 €63,80 €52,73
 
Gas strut hood 450 N, 325 mm Deutz-Fahr Agrotron 4.70-150
10%
Gas strut hood 450 N, 325 mm Deutz-Fahr Agrotron 4.70-150
Newtons: 450. A: 325 mm. B: 165 mm. C: 10 mm. D: 10 mm. To fit: bonnet. Form: 6.
€68,63 €56,72 €62,00 €51,24
 
Scharmüller Drawbar frame K80 330/25/32, 3500/4000 kg, black
12%
Scharmüller
Drawbar frame K80 330/25/32, 3500/4000 kg, black
To fit as: Case IH Serie CS, CVX; Deutz-Fahr Serie Agrotron 4.70-6.45 (MK1), Agr...
€2.505,76 €2.070,88 €2.216,00 €1.831,41
 
HELLA Replacement cover orange with optics, test mark E4 6509 ECE
HELLA
Replacement cover orange with optics, test mark E4 6509 ECE
Colour: Yellow. Test mark: E4 6509, ECE, K 18614. Additional information: • With...
€42,40 €35,04
 
HELLA Inserts work lamp square 83 x 83 mm, H3, 12 / 24 V, 55 W
HELLA
Inserts work lamp square 83 x 83 mm, H3, 12 / 24 V, 55 W
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power consumption: ...
€54,11 €44,72
 
Stabilus Gas strut roof window 150 N, 235 mm, stroke 81 mm Deutz-Fahr
Stabilus
Gas strut roof window 150 N, 235 mm, stroke 81 mm Deutz-Fahr
To fit as: Deutz Roof hatch
€28,15 €23,26
 
HELLA Work lamp flood beam Ultra beam H3 65 W, 12 / 24 V
HELLA
Work lamp flood beam Ultra beam H3 65 W, 12 / 24 V
Connection: AMP plug | Power consumption (W): 65 | Bending angle: 15 - 20 | Dime...
€67,95 €56,16
 
FTE Clutch master cylinder mineral oil, gray cast iron, with piston rod
5%
FTE
Clutch master cylinder mineral oil, gray cast iron, with piston rod
Medium: Mineral oil | Additional information: With piston rod | Material: Grey c...
€318,06 €262,86 €302,15 €249,71
 
GRANIT Aircon compressor 12 V, pulley-Ø 148 mm, 2 grooves
5%
GRANIT
Aircon compressor 12 V, pulley-Ø 148 mm, 2 grooves
Fixing: EM | Reference no.: 4558FK 351130101, QP7H15-8091 | Refrigerant: R 134a ...
€390,06 €322,36 €370,55 €306,24
 
Push button switch PTO shaft 48 V, button yellow, Ø 30 mm Agrotron
Push button switch PTO shaft 48 V, button yellow, Ø 30 mm Agrotron
Version: 48 V switching voltage Yellow button, make contact Total button travel:...
€38,00 €31,41
 
Elring Cylinder head gasket 1,4 mm, 1 bore, Ø 119 mm engine BF6M1013
5%
Elring
Cylinder head gasket 1,4 mm, 1 bore, Ø 119 mm engine BF6M1013
Ø (mm): 119 | Material: Combined soft material/metal gasket
€105,88 €87,50 €100,55 €83,10
 
GRANIT Ball joint, complete left 450 mm, M22 x 1,5, M24 x 1,5
5%
GRANIT
Ball joint, complete left 450 mm, M22 x 1,5, M24 x 1,5
A: 450 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 28 mm. Taper: 24 - 28 ...
€234,43 €193,74 €222,70 €184,05
 
Hand brake cable 1855 mm, M12 x 1,5 Deutz-Fahr Agrotron 4.70-150
5%
Hand brake cable 1855 mm, M12 x 1,5 Deutz-Fahr Agrotron 4.70-150
Length: 1855 mm. Thread: M12 x 1.5. Dimensions: Length: 1855 mm, Thread M12 x 1....
€198,92 €164,40 €188,95 €156,16
 
GRANIT Brake disc steel Ø 227 mm, knott version
5%
GRANIT
Brake disc steel Ø 227 mm, knott version
€49,17 €40,64 €46,70 €38,60
 
Master brake cylinder Ø 23,81 mm, mineral oil Deutz-Fahr Agrotron
5%
Master brake cylinder Ø 23,81 mm, mineral oil Deutz-Fahr Agrotron
Hole Ø: 23.81 mm.
€279,96 €231,37 €265,95 €219,79
 
Internal plate powershift 1,5 mm thick, inner 70,7 mm, outer 110,9 mm
Internal plate powershift 1,5 mm thick, inner 70,7 mm, outer 110,9 mm
Version: Thickness: 1.5 mm, Inner: 70.7 mm, Outer: 110.9 mm, 36 teeth.
€12,85 €10,62
 
VICTOR REINZ Cylinder head gasket thickness 1,7 mm, 3 bores
5%
VICTOR REINZ
Cylinder head gasket thickness 1,7 mm, 3 bores
€125,38 €103,62 €119,10 €98,43
 
Showing 121 - 144 of 203

Deutz-Fahr Agrotron 6.30 parts for cab, hitch and engine

A roof hatch that will no longer stay open, a dead work lamp on the cab roof, or a hitch that has developed play after years of hauling. For the Agrotron 6.30 you will find more than 200 parts here, from GRANIT and from HELLA, Scharmüller, ROCKINGER and PROBOSS.

Cab and driver's seat

The cab takes up a good share of this page. There are gas struts for the roof hatch, HELLA work lamps, standard and wide-angle mirrors, rocker switches for the lights and symbols for the switches. For long days in the seat there are tractor seats, including the Maximo Professional, plus an adapter plate that lets a different seat sit on the existing console.

A tip on gas struts: wherever possible, fit them with the piston rod pointing down. That keeps the internal seal bathed in oil and the strut holds its force longer. Do not wait until the hatch drops shut by itself either. A strut that is noticeably weakening is the first thing to give up on a frosty morning.

Hitch and engine

For towing there are drawbars, top drawbars and Piton Fix units from Scharmüller and ROCKINGER. On the engine side you will find cylinder head gaskets, an intake manifold gasket, V-belts and ball joints for the steering.

When the head gasket is replaced, the block face has to be spotless. Remove old gasket material with a plastic scraper rather than an abrasive disc, so no grit ends up in coolant passages or oil drillings. Check the head with a straightedge. If it has warped, a new gasket will only help for a short while. Look at the V-belts during the same job, and if the flanks are cracked or glazed, replace them while everything is accessible.

Matching parts to the 6.30

The type plate gives the exact model. The Agrotron 6 models look much alike from the outside, so trust the plate rather than the bonnet. For a drawbar, the rail width of the existing bracket is the key measurement, so check it before ordering. For gaskets and belts, take the number from the old part as a reference number and compare it with the product details.

The Deutz-Fahr Agrotron 6.45 from the same range has its own page too. Every other tractor from the make is on Deutz-Fahr parts, which helps if an older Deutz or another Agrotron works alongside the 6.30.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart