Menu
EUR

Deutz-Fahr Agrotron X720 tractor parts & technical data

Here you will find more than 190 parts for the Deutz-Fahr Agrotron X720, with trailer couplings, lighting and electrics for the Agrotron X series.

184 parts found for Deutz-Fahr Agrotron X720
Show:
FEBI Fuel pressure sensor Deutz Agrofarm (Tier 3) 410
FEBI
Fuel pressure sensor Deutz Agrofarm (Tier 3) 410 More
Fuel pressure sensor Deutz Agrofarm (Tier 3) 410
€190,53 €157,46 €108,51 €89,68
You save 43%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Description: Manual Piton-Fix with elevator be... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.306,80 €1.080,00 €1.050,65 €868,31
You save 20%
Sensor kit rail pressure Hürlimann, Deutz-Fahr, Lamborghini
Version: Rail pressure. More
Version: Rail pressure.
€315,25 €260,54 €299,45 €247,48
You save 5%
GRANIT Bleed valve Fendt, Deutz-Fahr
€241,85 €199,88 €229,75 €189,88
You save 5%
GRANIT Seal Ø 11,5 x 3 mm Fendt, SAME, Deutz-Fahr, Lamborghini
€14,20 €11,74
Seal Ø 27 x 2,5 mm Fendt, SAME, Deutz-Fahr, Lamborghini
€21,25 €17,56
GRAMMER Tractor seat Maximo Dynamic DDS MSG95AL/741 Fendt, Deutz, Deutz-Fahr
GRAMMER
To fit: Deutz VII. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 550 mm. Joystick co... More
To fit: Deutz VII. Suspension: Air suspension. Upholstery type: Fabric...
€3.442,00 €2.844,63
GRANIT Handle Deutz-Fahr Series 5600-6095HTS, Agrotron 4.70-260
€250,59 €207,10 €238,00 €196,69
You save 5%
PROBOSS Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
PROBOSS
To fit: Deutz V1. On-board voltage: 12 V. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 520 mm. Joystick console... More
To fit: Deutz V1. On-board voltage: 12 V. Upholstery type: Fabric. Sea...
€1.903,30 €1.572,98
GRANIT Gas strut roof window 150 N, 235 mm SAME, Hürlimann, Lamborghini
GRANIT
Newtons: 150. A: 235 mm. B: 110 mm. C: 8 mm. D: 8 mm. Form: 2. More
Newtons: 150. A: 235 mm. B: 110 mm. C: 8 mm. D: 8 mm. Form: 2.
€26,80 €22,15
Sensor kit rail pressure Hürlimann, Deutz-Fahr, Lamborghini
Version: Rail pressure. More
Version: Rail pressure.
€331,01 €273,56 €299,45 €247,48
You save 10%
GRANIT Work lamp spotlight H3 70 W, 12 / 24 V, 100 x 91 mm, upright
GRANIT
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 100 x 91 mm. Light function: Far-reaching illumination. Connection: AMP plug. Bulb: 12... More
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 100 x ...
€51,14 €42,26 €46,25 €38,22
You save 10%
Cobo Headlight left / right 12V60/55W / H4, built-in, screw fixing
Cobo
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal voltage: 12 V. Test mark: ECE. Light function: Dipped beam, full beam. Additional in... More
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal volt...
€87,89 €72,64 €83,45 €68,97
You save 5%
HELLA Reflector rectangular red, 70 x 31,5 mm, thickness 5 mm, bonded
HELLA
Colour: Red. Width: 70 mm. Form: Rectangular. Height: 31.5 mm. Material: Plastic. Material thickness: 5 mm. Fixing: Vertical. Installation location: R... More
Colour: Red. Width: 70 mm. Form: Rectangular. Height: 31.5 mm. Materia...
€2,86 €2,36
Walterscheid Adapter plate rail width 322 mm, hole pattern 140 x 80 mm, M20
Walterscheid
Hole (mm): M20 | Detent pin Ø (mm): 22 | Hole pattern (mm): 140 x 80 | Rail width (mm): 322 | D-value (kN): 89,3 | Colour: Black | Load capacity (kg)... More
Hole (mm): M20 | Detent pin Ø (mm): 22 | Hole pattern (mm): 140 x 80 ...
€554,06 €457,90 €435,30 €359,75
You save 21%
Walterscheid Inner part coupling pin 37 mm, rail width 322 mm, pin Ø 22 mm
Walterscheid
Load capacity (kg): 2000 | Description: This product is an automatic trailer hitch. The jaw dimensions and area of application comply with DIN 11028, ... More
Load capacity (kg): 2000 | Description: This product is an automatic t...
€1.769,02 €1.462,00 €1.459,40 €1.206,12
You save 18%
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves
SANDEN
Pulley Ø (mm): 132 | No. of grooves: 2 | Suitable oil: SP - 10 | Reference no.: 8227 | Nominal voltage (V): 12 | For compressor: SD7H15 | Fixing: EM ... More
Pulley Ø (mm): 132 | No. of grooves: 2 | Suitable oil: SP - 10 | Refe...
€485,61 €401,33 €461,30 €381,24
You save 5%
GRANIT Alternator 14 V / 200 A, flange 2 x 56 mm
GRANIT
Installation angle (°): l 60 | Direction of rotation: ↻ | Belt tension hole Ø / R (mm): 10,5 / 90,0 | Form: B | Mounting hole Ø / R (mm): 10,5 / ... More
Installation angle (°): l 60 | Direction of rotation: ↻ | Belt tens...
€281,37 €232,54 €267,30 €220,91
You save 5%
FEBI Axial joint 210 mm, Ø 56 mm, M22 x 1,5 / M24 x 1,5
€156,85 €129,63 €52,58 €43,45
You save 66%
GRANIT Ball joint 260 mm, taper 27 - 29,5 mm, M24 x 1,5, M24 x 1,5
GRANIT
A: 260 mm. C: M24 x 1,5 mm. D: M24 x 1,5 mm. E: 27 mm. F: 29,5 mm. Taper: 27 - 29,5 mm. More
A: 260 mm. C: M24 x 1,5 mm. D: M24 x 1,5 mm. E: 27 mm. F: 29,5 mm. Tap...
€373,65 €308,80 €354,95 €293,35
You save 5%
LUK Pilot bearing 20 x 52 x 15 mm
LUK
Dimensions: 20 x 52 x 15 mm. More
Dimensions: 20 x 52 x 15 mm.
€34,18 €28,25 €32,45 €26,82
You save 5%
GRANIT Wheel brake cylinder Deutz-Fahr Agrotron 230-260, Lamborghini
€810,24 €669,62 €769,70 €636,12
You save 5%
GRANIT Starter ring gear Ø 393/364 mm, 129 teeth Deutz
GRANIT
Version: Ø 393/364 mm, 129 teeth. More
Version: Ø 393/364 mm, 129 teeth.
€79,53 €65,73 €75,55 €62,44
You save 5%
Walterscheid Adapter plate 330 mm, 140 x 80 mm, guide 30 mm, M20, 2000 kg
Walterscheid
Rail width: 330 mm. Guide width: 30 mm. Detent pin Ø: 20 mm. Load capacity: 2800 kg. D-value: 89,3 kN. Hole pattern: 140 x 80 mm. Hole: M20 mm. Colou... More
Rail width: 330 mm. Guide width: 30 mm. Detent pin Ø: 20 mm. Load cap...
€960,14 €793,50 €792,10 €654,63
You save 18%
Showing 49 - 72 of 184

Deutz-Fahr Agrotron X720 parts

Lighting for long days

Field work on a Deutz-Fahr Agrotron X720 rarely stops when the sun goes down, which is why lighting is a big part of this page. There are work lamps, including flood beam versions, and LED main headlights. In total more than 190 parts fit this type, from GRANIT and from makers such as HELLA, Walterscheid, ROCKINGER and GRAMMER.

A work lamp that flickers is more often a poor earth connection than a failed lamp. Clean the contact faces and the plug before you replace anything, and check that the switch and fuse can handle the load if you add an extra lamp.

Hitches and couplings

  • Drawbars with automatic locking for the rail
  • Piton Fix and adapter plates for the lower hitch
  • Ball hitches and flange hitches for trailers with either system
  • Trailer couplings for lighter trailers

Do not grease a ball hitch that is designed to run dry. Grease holds dust and grit, which turns into a grinding paste between the ball and the socket. Follow the guidance of the hitch maker.

Engine bay, air conditioning and cab

Under the bonnet you will find aircon compressors, feed pumps, seals for the hydraulic pump and O-rings for the injection pump. In the cab there are air suspended GRAMMER tractor seats, PROBOSS seats with a seat heater and gas struts, for example for the roof window.

When an aircon compressor is replaced, renew the receiver drier as well and have the system evacuated before it is recharged. Moisture left in the circuit is a common reason for a new compressor to fail early.

If diesel weeps from around the injection pump, replace every O-ring at that joint rather than just the one that is visibly leaking. Rubber of the same age tends to fail in quick succession. Keep everything spotless while the system is open, as a single grain of dirt can do more harm to the injection system than the leak itself, and bleed the fuel system before starting the engine.

Confirming the fit

Your type plate should read Agrotron X720. For seals and O-rings, the reference number on the part you take out is the surest check. With an aircon compressor, also compare the number of pulley grooves and the position of the connections. Drawbars are chosen by the hole pattern of the rail on your tractor.

Every other tractor from the brand has its own page with matching parts, reachable through Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart