Menu
EUR

Deutz D 6007 tractor parts & technical data

The right parts keep a Deutz D 6007 from the 07 series running. This page offers more than 200 of them, such as trailer couplings, electrics and lighting.

227 parts found for Deutz-Fahr D 6007
Show:
Piston set complete Ø 102 mm, combustion chamber 56 mm, depth 17 mm
8%
Piston set complete Ø 102 mm, combustion chamber 56 mm, depth 17 mm
Dimensions: 3 rings, Ø 102 mm, Gudgeon pin Ø 35 x 80 mm, Combustion chamber Ø 56...
€217,51 €179,76 €200,11 €165,38
 
Tube rear outer-Ø 45 mm, inner-Ø inlet 41 mm Deutz-Fahr
8%
Tube rear outer-Ø 45 mm, inner-Ø inlet 41 mm Deutz-Fahr
Version: Outer Ø: 45 mm, Inner Ø inlet: 41 mm.
€49,71 €41,08 €45,73 €37,80
 
Exhaust pipe front inlet-Ø 65 mm, outer-Ø 54 mm Deutz-Fahr
8%
Exhaust pipe front inlet-Ø 65 mm, outer-Ø 54 mm Deutz-Fahr
Version: Inlet Ø = 65 mm, Outer Ø 54 mm. Inner Ø: 65 mm.
€42,37 €35,02 €38,98 €32,22
 
Fuel tap thread M14 x 1,5 Deutz-Fahr
8%
Fuel tap thread M14 x 1,5 Deutz-Fahr
€85,86 €70,96 €78,99 €65,28
 
Bolt set original end plate 1x M8 x 180, 2x M8 x 170 Deutz-Fahr
8%
Bolt set original end plate 1x M8 x 180, 2x M8 x 170 Deutz-Fahr
Technical data: consisting of: 1x M8 x 180, 2x M8 x 170 .
€39,55 €32,69 €36,39 €30,07
 
Bosch/Rexroth Hydraulic pump 16 cm³/rpm., taper 1:5, Ø 17 x 17, left Fendt, Deutz-Fahr
8%
Bosch/Rexroth
Hydraulic pump 16 cm³/rpm., taper 1:5, Ø 17 x 17, left Fendt, Deutz-Fahr
Output volume: 16 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure ...
€643,00 €531,41 €591,56 €488,89
 
Gasket lift housing 240 x 300 mm Deutz-Fahr
8%
Gasket lift housing 240 x 300 mm Deutz-Fahr
Dimensions: 240 x 300 mm.
€67,42 €55,72 €62,03 €51,26
 
Bush right lift arm 74 x 80 x 85 mm Deutz-Fahr
8%
Bush right lift arm 74 x 80 x 85 mm Deutz-Fahr
Dimensions: 74 x 80 x 85 mm.
€179,42 €148,28 €165,07 €136,42
 
Sealing ring piston 70 x 89 x 12 mm Deutz-Fahr
8%
Sealing ring piston 70 x 89 x 12 mm Deutz-Fahr
Dimensions: 70 x 89 x 12 mm.
€40,97 €33,86 €37,69 €31,15
 
Sealing ring piston 84 x 3 mm Deutz-Fahr
Sealing ring piston 84 x 3 mm Deutz-Fahr
Dimensions: 84 x 3 mm.
€17,44 €14,41
 
Sealing ring lift shaft left 75 x 90 x 10 mm, NBR Deutz-Fahr
8%
Sealing ring lift shaft left 75 x 90 x 10 mm, NBR Deutz-Fahr
Dimensions: 75 x 90 x 10 mm. Material: NBR.
€37,94 €31,36 €34,90 €28,85
 
Rivet copper 3 x 8 mm, DIN 7338-B - 100 pieces
Rivet copper 3 x 8 mm, DIN 7338-B - 100 pieces
Hole Ø: 3 mm. Length: 8 mm. d2: 5,5 mm. K: 0,8 mm. e: 1,5 mm. Material: Steel. D...
€31,41 €25,96
 
Brake light switch mechanical M14 x 1, break contact, blade terminal 6,3 mm
Brake light switch mechanical M14 x 1, break contact, blade terminal 6,3 mm
Version: Thread M14 x 1, break contact, normally on, Blade terminals 6.3 mm. Men...
€36,91 €30,51
 
Headlight left / right 12 / 24 V, H4, glass Ø 136 mm, built-in
8%
Headlight left / right 12 / 24 V, H4, glass Ø 136 mm, built-in
Bulb: 12V60/55W / H4, 24V75/70W / H4. Installation location: Left, right. Nomina...
€152,15 €125,74 €139,98 €115,68
 
HELLA Glass right indicator/position light IHC, Deutz-Fahr, Fendt, Kubota
HELLA
Glass right indicator/position light IHC, Deutz-Fahr, Fendt, Kubota
To fit as: Case IH 433, 533, 633, 733, 833, 440, 540, 640, 740, 840, 940, 644, 7...
€20,20 €16,69
 
Hydraulic steering steering wheel, steering column, orbitrol, steering cylinder
8%
Hydraulic steering steering wheel, steering column, orbitrol, steering cylinder
To fit as: Deutz 4807, 5207, 5506, 6006, 6007, 6206, 6207, 6507
€2.886,22 €2.385,31 €2.655,32 €2.194,48
 
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
23%
HELLA
Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
€595,84 €492,43 €459,08 €379,41
 
Track rod trade set 1150 - 1210 mm, taper 18 - 20 mm
8%
Track rod trade set 1150 - 1210 mm, taper 18 - 20 mm
A: 1150 - 1210 mm. C: 18 - 20 mm. G: .
€303,37 €250,72 €279,10 €230,66
 
Ball joint 310 mm, taper 14,4 - 16,2 mm, M12 x 1,25 / 16 mm
8%
Ball joint 310 mm, taper 14,4 - 16,2 mm, M12 x 1,25 / 16 mm
A: 310 mm. C: M12 x 1,25 mm. D: 16 mm. E: 14,4 mm. F: 16,2 mm. Taper: 14,4 - 16,...
€58,95 €48,72 €54,23 €44,82
 
Steering rod telescopic axle length 975 - 1050 mm, M14 x 1,5 mm
8%
Steering rod telescopic axle length 975 - 1050 mm, M14 x 1,5 mm
A: 975 - 1075 mm. C: 16 - 18 mm. G: . D: M14 x 1,5 mm. E: 26 mm. F: 18 mm.
€149,98 €123,95 €137,98 €114,03
 
LUK Pilot bearing 20 x 52 x 15 mm
8%
LUK
Pilot bearing 20 x 52 x 15 mm
Dimensions: 20 x 52 x 15 mm.
€32,83 €27,13 €30,20 €24,96
 
VICTOR REINZ Crankshaft seal for Ø 65 x 85 x 10,5 mm engine FL912, FL913 Deutz-Fahr
8%
VICTOR REINZ
Crankshaft seal for Ø 65 x 85 x 10,5 mm engine FL912, FL913 Deutz-Fahr
€37,37 €30,88 €34,38 €28,41
 
VICTOR REINZ Crankshaft seal rear Fendt, Deutz-Fahr
8%
VICTOR REINZ
Crankshaft seal rear Fendt, Deutz-Fahr
€42,88 €35,44 €39,45 €32,60
 
Bush for fan Deutz-Fahr
Bush for fan Deutz-Fahr
€79,26 €65,50
 
Exhaust manifold Deutz-Fahr D 4007 - D 7207, D 4507C - D 7807C
8%
Exhaust manifold Deutz-Fahr D 4007 - D 7207, D 4507C - D 7807C
€173,62 €143,49 €159,73 €132,01
 
Piston ring set 4 rings, Ø 102 mm, 3/2,5/2,5/5 mm Deutz-Fahr
8%
Piston ring set 4 rings, Ø 102 mm, 3/2,5/2,5/5 mm Deutz-Fahr
Dimensions: 4 rings, Ø 102 mm, 3 mm (trapezoidal ring) / 2.5 mm / 2.5 mm / 5 mm....
€44,72 €36,96 €41,14 €34,00
 
Cover engine Deutz FL812-FL913
Cover engine Deutz FL812-FL913
Engine types: FL912, FL913, FL812.
€12,56 €10,38
 
O-ring oil pump 14,5 x 3 mm Fendt, Renault, Deutz-Fahr
O-ring oil pump 14,5 x 3 mm Fendt, Renault, Deutz-Fahr
Dimensions: 14.5 x 3 mm.
€8,25 €6,82
 
Valve spring engine F2L912-F6L913, BF6L913 Deutz-Fahr, Fendt
Valve spring engine F2L912-F6L913, BF6L913 Deutz-Fahr, Fendt
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€11,95 €9,88
 
Oil sump gasket 3 cylinder engine F3L812 Fendt, Deutz-Fahr
Oil sump gasket 3 cylinder engine F3L812 Fendt, Deutz-Fahr
Engine types: F3L812.
€7,09 €5,86
 
Thrust washer rear thickness 2,94 mm Deutz-Fahr
Thrust washer rear thickness 2,94 mm Deutz-Fahr
Engine types: FL912. Dimensions: Thickness 2.94 mm.
€18,08 €14,94
 
Connecting rod bush Ø 35 mm Fendt, Deutz-Fahr
Connecting rod bush Ø 35 mm Fendt, Deutz-Fahr
Dimensions: Ø 35 mm.
€9,33 €7,71
 
Push rod Fendt, Deutz-Fahr
8%
Push rod Fendt, Deutz-Fahr
Engine types: FL912, FL913, FL812, F712.
€60,95 €50,37 €56,07 €46,34
 
Valve cover bolt sealing ring nylon, Ø 16 x 8 mm, thickness 3,7 mm
Valve cover bolt sealing ring nylon, Ø 16 x 8 mm, thickness 3,7 mm
Engine types: FL712, FL812. Outer Ø: 16 mm. Form: Asymmetrical. Inner Ø: 8 mm. M...
€1,63 €1,34
 
Shim liner Top 1,1 mm, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
Shim liner Top 1,1 mm, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
Outer Ø: 120 mm. Form: A form. Inner Ø: 102,6 mm. Material: steel. Thickness: 1,...
€4,75 €3,93
 
Shim 0,5 mm liner Bottom, Ø 117,6 x 112 mm Fendt, Deutz-Fahr
Shim 0,5 mm liner Bottom, Ø 117,6 x 112 mm Fendt, Deutz-Fahr
Outer Ø: 117,6 mm. Inner Ø: 112 mm. Material: Steel. Thickness: 0,5 mm.
€3,59 €2,96
 
Shim cylinder liner 0,2 mm, Ø 117,6 x 110,1 mm Deutz-Fahr
Shim cylinder liner 0,2 mm, Ø 117,6 x 110,1 mm Deutz-Fahr
Outer Ø: 117,6 mm. Inner Ø: 110,1 mm. Material: Steel. Thickness: 0,2 mm.
€2,83 €2,33
 
Cylinder head gasket set engine FL912, FL913, BFL913 Fendt, Deutz-Fahr, Linde
Cylinder head gasket set engine FL912, FL913, BFL913 Fendt, Deutz-Fahr, Linde
Engine types: FL912, FL913, BFL913. Supplementary set: For one cylinder head. Ad...
€19,35 €15,99
 
Oil pump thread 28 x 1,5 mm Fendt, Renault, Deutz-Fahr
8%
Oil pump thread 28 x 1,5 mm Fendt, Renault, Deutz-Fahr
Dimensions: Thread 28 x 1.5 mm.
€116,47 €96,26 €107,15 €88,56
 
Connecting rod bolt M12 x 1,5 x 65 mm Fendt, Deutz-Fahr
Connecting rod bolt M12 x 1,5 x 65 mm Fendt, Deutz-Fahr
Engine types: FL913, BFL913. Dimensions: M12 x 1.5 x 65 mm.
€23,13 €19,11
 
Connecting rod bearing standard, Ø 60 mm, width 25 mm Fendt, Deutz-Fahr
Connecting rod bearing standard, Ø 60 mm, width 25 mm Fendt, Deutz-Fahr
Engine types: FL812, FL912. Dimensions: Ø 60 mm.
€10,94 €9,04
 
Main bearing standard Ø 70 mm Fendt, Deutz-Fahr
Main bearing standard Ø 70 mm Fendt, Deutz-Fahr
Engine types: FL812, FL912. Dimensions: 4.
€16,99 €14,04
 
Valve seat ring outlet valve Fendt, Deutz-Fahr
Valve seat ring outlet valve Fendt, Deutz-Fahr
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€28,38 €23,45
 
Valve cover gewelfd Fendt, Deutz-Fahr
Valve cover gewelfd Fendt, Deutz-Fahr
Engine types: FL912, FL913.
€32,10 €26,53
 
Bolt set 3de steering valve M10 x 190 Deutz-Fahr
Bolt set 3de steering valve M10 x 190 Deutz-Fahr
Technical data: M10 x 190.
€36,94 €30,53
 
Bolt set 2de steering valve 1x M8 x 140, 2x M8 x 130 Deutz-Fahr
Bolt set 2de steering valve 1x M8 x 140, 2x M8 x 130 Deutz-Fahr
Technical data: consisting of: 1 x M8 x 140, 2 x M8 x 130, for 2nd Control unit.
€33,59 €27,76
 
Bolt set 1ste steering valve M10 x 100 Deutz-Fahr
Bolt set 1ste steering valve M10 x 100 Deutz-Fahr
Technical data: M10 x 100.
€16,33 €13,49
 
Showing 145 - 192 of 227

Deutz D 6007 parts for an engine rebuild, clutch and linkage

Opening up a Deutz D 6007 for an engine rebuild or a new clutch goes smoothly only when every part is ready on the bench. This page lists more than 200 parts for the D 6007, from GRANIT and from brands including HELLA, LUK, Walterscheid and VICTOR REINZ.

Clutch work

For the clutch there are double clutch units and thrust bearings for the driving clutch. A thrust bearing that sings when you press the pedal is best replaced together with the clutch, since the tractor has to be split for either job anyway.

Engine rebuild: rings, seals and shims

For the engine you will find piston ring sets, crankshaft seals, shims for the cylinder liners and exhaust gaskets, enough to sort out an engine that leaks or burns oil in one go.

Check the ring gap on new piston rings first. Push the ring squarely into the bore and measure the gap with a feeler gauge. Then fit the rings to the piston with the gaps staggered so they never line up. The shims under each cylinder liner set how far the liner stands proud of the block. Measure that protrusion and use the same thickness that came out, otherwise the head gasket will not seal properly.

With a new crankshaft seal, look closely at the running surface on the shaft. If the old seal has worn a groove, press the new one in slightly deeper or shallower so the lip runs on clean metal. Oil the lip lightly and drive the seal in squarely, since a seal that sits crooked leaks from day one.

Lift linkage, electrics and smaller parts

For the linkage there are sealing rings for the lift shaft and bushes for the lift arms. A lift arm that visibly rocks on its shaft usually has worn bushes, and the seal next to them has suffered from the play too, so replace both. The D 6007 is also covered with starter motors, alternators, tension springs, bolt sets for the steering valve, lamp lenses, a lockable tank cap with ventilation and a drawbar.

That lockable tank cap earns its place on a tractor parked outside or in an open yard. The vent prevents a vacuum in the tank, and the lock keeps uninvited visitors away from the diesel.

The right part for your Deutz

Write down the serial number from the type plate and also the engine number, which adds certainty for engine parts. The D 6007 belongs to the 07 series from Deutz. Compare the reference number on the old part with the product details, and for piston rings also measure the bore.

From the same series, the Deutz D 6207, Deutz D 6807 and Deutz D 7007 have pages of their own, useful when more than one Deutz lives in the shed. The complete range for the brand is under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart