Menu
EUR

Deutz D 6007 tractor parts & technical data

The right parts keep a Deutz D 6007 from the 07 series running. This page offers more than 200 of them, such as trailer couplings, electrics and lighting.

226 parts found for Deutz-Fahr D 6007
Show:
Tension spring right Brake pedal Deutz, Deutz-Fahr
Tension spring right Brake pedal Deutz, Deutz-Fahr
To fit as: Deutz D 3006, 4006, 5006, 6006, 4506, 5206, 5506, 6206, 6806, 2807, 3...
€19,40 €16,03
 
Exhaust manifold Deutz-Fahr series 07 4007-7207, 07C 4507C-7807C
10%
Exhaust manifold Deutz-Fahr series 07 4007-7207, 07C 4507C-7807C
To fit as: Deutz series 07, 4007, 4507, 4807, 5207, 6007, 6207, 6507, 6807, 6907...
€174,71 €144,39 €158,00 €130,58
 
GRANIT Start switch 12 V pull switch, built-in Ø 10,5 mm, 0-1-2
GRANIT
Start switch 12 V pull switch, built-in Ø 10,5 mm, 0-1-2
Menke no.: 248055 | Switching stages: 0-1-2 | Version: Pull switch Protected aga...
€60,30 €49,83
 
GRANIT Double clutch DuT 250/280 K 36 x 40 mm, 20 splines Deutz-Fahr
5%
GRANIT
Double clutch DuT 250/280 K 36 x 40 mm, 20 splines Deutz-Fahr
Additional information: Made in Germany | Dimensions (mm): 36 x 40, 20 grooves |...
€730,57 €603,78 €694,00 €573,55
 
Starter motor with reduction 12 V, 2,7 kW, 9 teeth, 208,5 mm
5%
Starter motor with reduction 12 V, 2,7 kW, 9 teeth, 208,5 mm
€518,86 €428,81 €492,90 €407,36
 
Hydraulic steering Deutz-Fahr 4807-6507 Deutz-Fahr D 5506-6507
5%
Hydraulic steering Deutz-Fahr 4807-6507 Deutz-Fahr D 5506-6507
€2.765,90 €2.285,87 €2.627,60 €2.171,57
 
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm.
€32,10 €26,53
 
GRANIT Push rod Fendt, Deutz-Fahr
5%
GRANIT
Push rod Fendt, Deutz-Fahr
Engine types: FL912, FL913, FL812, F712.
€58,41 €48,27 €55,45 €45,83
 
GRANIT Crankshaft seal rear engine Deutz FL913, BFL913
5%
GRANIT
Crankshaft seal rear engine Deutz FL913, BFL913
€38,32 €31,67 €36,40 €30,08
 
GRANIT Valve seat ring outlet valve Fendt, Deutz-Fahr
GRANIT
Valve seat ring outlet valve Fendt, Deutz-Fahr
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€27,20 €22,48
 
Valve cover gewelfd Fendt, Deutz-Fahr
Valve cover gewelfd Fendt, Deutz-Fahr
Engine types: FL912, FL913.
€30,75 €25,41
 
Exhaust pipe front inlet-Ø 65 mm, outer-Ø 54 mm Deutz-Fahr
5%
Exhaust pipe front inlet-Ø 65 mm, outer-Ø 54 mm Deutz-Fahr
Version: Inlet Ø = 65 mm, Outer Ø 54 mm. Inner Ø: 65 mm.
€40,61 €33,56 €38,55 €31,86
 
Walterscheid Piton Fix rail width 309 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
18%
Walterscheid
Piton Fix rail width 309 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€1.651,65 €1.365,00 €1.362,60 €1.126,12
 
Scharmüller Clutch hitches can be disconnected with bracket, 82,4 kN, working length 211 mm
16%
Scharmüller
Clutch hitches can be disconnected with bracket, 82,4 kN, working length 211 mm
suitable for: Deutz-Fahr. Series: DX AgroPrima. Category: Hitches. Version: Can ...
€1.011,48 €835,93 €851,90 €704,05
 
GRANIT Temperature warning switch 12 V, M10, flat head
5%
GRANIT
Temperature warning switch 12 V, M10, flat head
Version: Flat head | M10. Connection: Flat head. Thread: M10. Temperature: - °C.
€104,06 €86,00 €98,85 €81,69
 
GRANIT Maintenance switch filter
10%
GRANIT
Maintenance switch filter
Version: Filter.
€77,37 €63,94 €70,00 €57,85
 
HELLA Indicator / position light right IHC, Deutz-Fahr, Fendt, Kubota
13%
HELLA
Indicator / position light right IHC, Deutz-Fahr, Fendt, Kubota
To fit as: Case IH 433, 533, 633, 733, 833, 440, 540, 640, 740, 840, 940, 644, 7...
€18,15 €15,00 €15,81 €13,07
 
GRANIT Hydraulic pump 16,8 cm³, anticlockwise rotation, taper 17 mm
10%
GRANIT
Hydraulic pump 16,8 cm³, anticlockwise rotation, taper 17 mm
€133,78 €110,56 €121,00 €100,00
 
Tank cap tank collar Ø 106 mm with ventilation Lockable
Tank cap tank collar Ø 106 mm with ventilation Lockable
To fit as: Deutz 2506, 3006, 4006, 4506, 5006, 5206, 5506, 6006, 6206, 6806, 700...
€33,50 €27,69
 
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
21%
Walterscheid
Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Description: This product is a ball hitch. The hitch ball 80 dimensions and area...
€2.084,89 €1.723,05 €1.638,10 €1.353,80
 
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
21%
Walterscheid
Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ...
€2.159,85 €1.785,00 €1.697,00 €1.402,48
 
GRANIT Drive shaft 1135 mm Deutz-Fahr D 4507 - 6007C
5%
GRANIT
Drive shaft 1135 mm Deutz-Fahr D 4507 - 6007C
Length (mm): 1135
€977,07 €807,50 €928,20 €767,11
 
Showing 49 - 72 of 226

Deutz D 6007 parts for an engine rebuild, clutch and linkage

Opening up a Deutz D 6007 for an engine rebuild or a new clutch goes smoothly only when every part is ready on the bench. This page lists more than 200 parts for the D 6007, from GRANIT and from brands including HELLA, LUK, Walterscheid and VICTOR REINZ.

Clutch work

For the clutch there are double clutch units and thrust bearings for the driving clutch. A thrust bearing that sings when you press the pedal is best replaced together with the clutch, since the tractor has to be split for either job anyway.

Engine rebuild: rings, seals and shims

For the engine you will find piston ring sets, crankshaft seals, shims for the cylinder liners and exhaust gaskets, enough to sort out an engine that leaks or burns oil in one go.

Check the ring gap on new piston rings first. Push the ring squarely into the bore and measure the gap with a feeler gauge. Then fit the rings to the piston with the gaps staggered so they never line up. The shims under each cylinder liner set how far the liner stands proud of the block. Measure that protrusion and use the same thickness that came out, otherwise the head gasket will not seal properly.

With a new crankshaft seal, look closely at the running surface on the shaft. If the old seal has worn a groove, press the new one in slightly deeper or shallower so the lip runs on clean metal. Oil the lip lightly and drive the seal in squarely, since a seal that sits crooked leaks from day one.

Lift linkage, electrics and smaller parts

For the linkage there are sealing rings for the lift shaft and bushes for the lift arms. A lift arm that visibly rocks on its shaft usually has worn bushes, and the seal next to them has suffered from the play too, so replace both. The D 6007 is also covered with starter motors, alternators, tension springs, bolt sets for the steering valve, lamp lenses, a lockable tank cap with ventilation and a drawbar.

That lockable tank cap earns its place on a tractor parked outside or in an open yard. The vent prevents a vacuum in the tank, and the lock keeps uninvited visitors away from the diesel.

The right part for your Deutz

Write down the serial number from the type plate and also the engine number, which adds certainty for engine parts. The D 6007 belongs to the 07 series from Deutz. Compare the reference number on the old part with the product details, and for piston rings also measure the bore.

From the same series, the Deutz D 6207, Deutz D 6807 and Deutz D 7007 have pages of their own, useful when more than one Deutz lives in the shed. The complete range for the brand is under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart