Menu
EUR

Deutz D 6007 tractor parts & technical data

The right parts keep a Deutz D 6007 from the 07 series running. This page offers more than 200 of them, such as trailer couplings, electrics and lighting.

227 parts found for Deutz-Fahr D 6007
Show:
FEBI Fuel filter WK842
57%
FEBI
Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
 
BOSCH Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
4%
BOSCH
Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
€569,55 €470,70 €548,54 €453,34
 
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm.
€33,53 €27,71
 
Gasket silencer engine FL912, FL913 Deutz-Fahr
Gasket silencer engine FL912, FL913 Deutz-Fahr
Motor No: BFL913, BF6M1013.
€18,89 €15,61
 
O-ring feed pump Ø 38 x 3 mm Deutz engine 912, 913W/T
O-ring feed pump Ø 38 x 3 mm Deutz engine 912, 913W/T
Version: Ø 38 x 3 mm.
€7,99 €6,60
 
LUK Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
8%
LUK
Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
Dimensions (mm): 20 x 52 x 15
€35,51 €29,35 €32,67 €27,00
 
Clutch plate 228, 28 x 32 mm, 17 splines Deutz-Fahr
8%
Clutch plate 228, 28 x 32 mm, 17 splines Deutz-Fahr
Dimensions (mm): 28 x 32, 17 grooves | Additional information: Made in Germany
€165,01 €136,37 €151,81 €125,46
 
Thrust bearing single PTO clutch 70 x 110 x 20 mm
8%
Thrust bearing single PTO clutch 70 x 110 x 20 mm
Dimensions (mm): 70 x 110 x 20
€36,11 €29,84 €33,22 €27,46
 
Elring Gasket set top and bottom 3 cylinder engine F3L912, F3L913
8%
Elring
Gasket set top and bottom 3 cylinder engine F3L912, F3L913
Additional information: with crankshaft sealing ring / without cylinder head gas...
€131,19 €108,42 €120,69 €99,75
 
Elring Cylinder head bolt set M12 x 1,75 x 211 mm, wrench size 17 - 4 pieces
8%
Elring
Cylinder head bolt set M12 x 1,75 x 211 mm, wrench size 17 - 4 pieces
Notes: Set of 4 | Dimensions (mm): M12 x 1.75 x 211 | Supplementary set: For one...
€118,56 €97,98 €109,08 €90,14
 
Starter motor with reduction 12 V, 2,7 kW, 9 teeth, 208,5 mm
8%
Starter motor with reduction 12 V, 2,7 kW, 9 teeth, 208,5 mm
€541,43 €447,46 €498,12 €411,67
 
Hydraulic steering Deutz-Fahr 4807-6507 Deutz-Fahr D 5506-6507
8%
Hydraulic steering Deutz-Fahr 4807-6507 Deutz-Fahr D 5506-6507
€2.886,22 €2.385,31 €2.655,32 €2.194,48
 
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
8%
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
Version: Ø 393/364 mm, 129 teeth.
€82,99 €68,59 €76,35 €63,10
 
Rocker arm shaft engine FL912, FL913, FL712, FL812 Fendt, Deutz-Fahr
Rocker arm shaft engine FL912, FL913, FL712, FL812 Fendt, Deutz-Fahr
Engine types: FL912, FL913, FL712, FL812.
€15,21 €12,57
 
Fastening hood Deutz-Fahr Series 07-07C, D 2807-7807C
8%
Fastening hood Deutz-Fahr Series 07-07C, D 2807-7807C
€61,44 €50,78 €56,52 €46,71
 
Drive shaft 1135 mm Deutz-Fahr D 4507 - 6007C
8%
Drive shaft 1135 mm Deutz-Fahr D 4507 - 6007C
Length (mm): 1135
€1.019,58 €842,63 €938,01 €775,22
 
Clutch plate 250, 28 x 32 mm, 17 splines Deutz-Fahr
8%
Clutch plate 250, 28 x 32 mm, 17 splines Deutz-Fahr
Additional information: Made in Germany | Dimensions (mm): 28 x 32, 17 grooves
€143,14 €118,30 €131,69 €108,83
 
Elring Crankshaft seal rear 115 x 140 x 13 mm, FPM, engine FL912 - BFL913
8%
Elring
Crankshaft seal rear 115 x 140 x 13 mm, FPM, engine FL912 - BFL913
Width (mm): 13 | Inner Ø (mm): 115 | Outer Ø (mm): 140 | Material: FPM (fluoro r...
€70,51 €58,27 €64,87 €53,61
 
Steering rod mechanical steering 4-WD 1030 mm, taper 16 - 18 mm
8%
Steering rod mechanical steering 4-WD 1030 mm, taper 16 - 18 mm
A: 1030 mm. B: M14 x 1,5 mm. C: 16 - 18 mm. G: . D: M14 x 1,5 mm. E: 28 mm. F: 2...
€242,65 €200,54 €223,24 €184,49
 
VICTOR REINZ Valve cover gasket Deutz engine FL912, FL913, BFL913
VICTOR REINZ
Valve cover gasket Deutz engine FL912, FL913, BFL913
€10,01 €8,27
 
Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, ...
€36,59 €30,24
 
Piston ring set 3 rings Ø 102 mm, 2,94 mm trapezoidal ring / 3 mm / 3 mm
8%
Piston ring set 3 rings Ø 102 mm, 2,94 mm trapezoidal ring / 3 mm / 3 mm
Dimensions: 3 rings, Ø 102 mm, 2.94 mm (trapezoidal ring) / 3 mm / 3 mm.
€104,55 €86,41 €96,19 €79,49
 
Piston ring set 3 rings Ø 102 mm, 2x 3 mm trapezoidal ring / 3,5 mm
8%
Piston ring set 3 rings Ø 102 mm, 2x 3 mm trapezoidal ring / 3,5 mm
Dimensions: 3 rings, Ø 102 mm, 3 mm (trapezoidal ring) / 3 mm (trapezoidal ring)...
€59,80 €49,42 €55,02 €45,47
 
Sealing ring push rod tube Fendt, Deutz-Fahr
Sealing ring push rod tube Fendt, Deutz-Fahr
Engine types: FL712, FL812.
€1,73 €1,43
 
Manifold gasket exhaust Fendt, Deutz-Fahr
Manifold gasket exhaust Fendt, Deutz-Fahr
Engine types: FL712, FL812.
€4,89 €4,04
 
Bolt set 1ste steering valve 3x M8 x 90
Bolt set 1ste steering valve 3x M8 x 90
Technical data: 3x M8 x 90.
€18,40 €15,21
 
End control unit single-acting 210 bar, M18 x 1,5 Deutz D 2506 - D 4006
8%
End control unit single-acting 210 bar, M18 x 1,5 Deutz D 2506 - D 4006
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: max. 25 l/m...
€577,76 €477,49 €531,54 €439,29
 
ROCKINGER Drawbar inner part 310 mm, coupling pin 31,5 mm, 2000 kg
4%
ROCKINGER
Drawbar inner part 310 mm, coupling pin 31,5 mm, 2000 kg
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31,...
€910,37 €752,37 €876,79 €724,62
 
Scharmüller Clutch hitches can be disconnected with bracket, 82,4 kN, working length 211 mm
Scharmüller
Clutch hitches can be disconnected with bracket, 82,4 kN, working length 211 mm
suitable for: Deutz-Fahr. Series: DX AgroPrima. Category: Hitches. Version: Can ...
€924,79 €764,29
 
Drive shaft 1800 mm, 2x M18 x 1,5
8%
Drive shaft 1800 mm, 2x M18 x 1,5
Version: Thread: 2 x M18 x 1.5.
€79,07 €65,35 €72,74 €60,12
 
Push button switch hazard lights 12 / 24 V red, with lock
8%
Push button switch hazard lights 12 / 24 V red, with lock
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6.3 x 0.8 (L...
€57,83 €47,79 €53,20 €43,97
 
Lamp socket intermediate part rear
8%
Lamp socket intermediate part rear
€36,81 €30,42 €33,87 €27,99
 
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 4...
€48,67 €40,22 €44,78 €37,01
 
Hydraulic pump 16,8 cm³, anticlockwise rotation, taper 17 mm
8%
Hydraulic pump 16,8 cm³, anticlockwise rotation, taper 17 mm
€132,96 €109,88 €122,32 €101,09
 
Double clutch DuT 295 36 x 40 mm, 20 splines Deutz-Fahr
8%
Double clutch DuT 295 36 x 40 mm, 20 splines Deutz-Fahr
Dimensions (mm): 36 x 40, 20 grooves | Flywheel design: Flat | Material specific...
€685,60 €566,61 €630,75 €521,28
 
Ball brake mechanism Deutz-Fahr
Ball brake mechanism Deutz-Fahr
€15,89 €13,13
 
KS Piston ring set 4 rings, Ø 102 mm, 2,94/2,5/2,5/5 mm Deutz-Fahr
8%
KS
Piston ring set 4 rings, Ø 102 mm, 2,94/2,5/2,5/5 mm Deutz-Fahr
Dimensions: 4 rings, Ø 102 mm, 2.94 mm (trapezoidal ring) / 2.5 mm / 2.5 mm / 5 ...
€64,63 €53,41 €59,46 €49,14
 
Sealing ring for injection nozzle Ø 19 x 9,2 mm, 2 mm thick, copper Deutz-Fahr
Sealing ring for injection nozzle Ø 19 x 9,2 mm, 2 mm thick, copper Deutz-Fahr
Outer Ø: 19 mm. Inner Ø: 9,2 mm. Material: copper. Thickness: 2 mm.
€3,03 €2,50
 
Cylinder head Deutz-Fahr
8%
Cylinder head Deutz-Fahr
Engine types: BFL913, BFL913T.
€296,24 €244,83 €272,54 €225,24
 
Thrust washer standard Deutz-Fahr
Thrust washer standard Deutz-Fahr
€33,84 €27,96
 
Piston set complete Ø 102 mm, combustion chamber 56 mm, cooling channel
8%
Piston set complete Ø 102 mm, combustion chamber 56 mm, cooling channel
Dimensions: 3 rings, Ø 102 mm, gudgeon pin Ø 35 x 80 mm, combustion chamber Ø 56...
€211,64 €174,91 €194,71 €160,92
 
Tank cap with ventilation Lockable, tank collar Ø 106 mm
Tank cap with ventilation Lockable, tank collar Ø 106 mm
Filler neck Ø: 106 mm.
€34,99 €28,92
 
End plate steering valve SD60 250 bar, 50 l/min, 100 x 118 x 25 mm
8%
End plate steering valve SD60 250 bar, 50 l/min, 100 x 118 x 25 mm
Technical data: Max. operating pressure: 250 bar, Nominal flow rate: max. 50 l/m...
€170,59 €140,98 €156,94 €129,70
 
ROCKINGER Drawbar K80 rail width 310 mm, locking pin Ø 22 mm
23%
ROCKINGER
Drawbar K80 rail width 310 mm, locking pin Ø 22 mm
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.431,83 €1.183,33 €1.103,20 €911,74
 
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
21%
Walterscheid
Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 ...
€1.820,72 €1.504,73 €1.439,48 €1.189,65
 
Temperature warning switch 12 V, M10, flat head
8%
Temperature warning switch 12 V, M10, flat head
Version: Flat head | M10. Connection: Flat head. Thread: M10. Temperature: - °C.
€108,59 €89,74 €99,90 €82,56
 
Maintenance switch filter
8%
Maintenance switch filter
Version: Filter.
€76,89 €63,55 €70,74 €58,46
 
Showing 49 - 96 of 227

Deutz D 6007 parts for an engine rebuild, clutch and linkage

Opening up a Deutz D 6007 for an engine rebuild or a new clutch goes smoothly only when every part is ready on the bench. This page lists more than 200 parts for the D 6007, from GRANIT and from brands including HELLA, LUK, Walterscheid and VICTOR REINZ.

Clutch work

For the clutch there are double clutch units and thrust bearings for the driving clutch. A thrust bearing that sings when you press the pedal is best replaced together with the clutch, since the tractor has to be split for either job anyway.

Engine rebuild: rings, seals and shims

For the engine you will find piston ring sets, crankshaft seals, shims for the cylinder liners and exhaust gaskets, enough to sort out an engine that leaks or burns oil in one go.

Check the ring gap on new piston rings first. Push the ring squarely into the bore and measure the gap with a feeler gauge. Then fit the rings to the piston with the gaps staggered so they never line up. The shims under each cylinder liner set how far the liner stands proud of the block. Measure that protrusion and use the same thickness that came out, otherwise the head gasket will not seal properly.

With a new crankshaft seal, look closely at the running surface on the shaft. If the old seal has worn a groove, press the new one in slightly deeper or shallower so the lip runs on clean metal. Oil the lip lightly and drive the seal in squarely, since a seal that sits crooked leaks from day one.

Lift linkage, electrics and smaller parts

For the linkage there are sealing rings for the lift shaft and bushes for the lift arms. A lift arm that visibly rocks on its shaft usually has worn bushes, and the seal next to them has suffered from the play too, so replace both. The D 6007 is also covered with starter motors, alternators, tension springs, bolt sets for the steering valve, lamp lenses, a lockable tank cap with ventilation and a drawbar.

That lockable tank cap earns its place on a tractor parked outside or in an open yard. The vent prevents a vacuum in the tank, and the lock keeps uninvited visitors away from the diesel.

The right part for your Deutz

Write down the serial number from the type plate and also the engine number, which adds certainty for engine parts. The D 6007 belongs to the 07 series from Deutz. Compare the reference number on the old part with the product details, and for piston rings also measure the bore.

From the same series, the Deutz D 6207, Deutz D 6807 and Deutz D 7007 have pages of their own, useful when more than one Deutz lives in the shed. The complete range for the brand is under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart