Menu
EUR

Deutz D 7007 tractor parts & technical data

If the lights on your Deutz D 7007 have failed or the electrics are playing up, this page lists more than 200 parts that fit this 07 series tractor.

213 parts found for Deutz-Fahr D 7007
Show:
Silencer vertical 1130 mm, Ø 57/45 mm Deutz-Fahr
5%
Silencer vertical 1130 mm, Ø 57/45 mm Deutz-Fahr
Version: Length: 1130 mm, Inner Ø: 57 mm, Outlet Ø: 45 mm.
€104,54 €86,40 €99,30 €82,07
 
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
5%
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor
€176,21 €145,63 €167,35 €138,31
 
Cylinder head with valves Deutz-Fahr
5%
Cylinder head with valves Deutz-Fahr
Engine types: FL912, FL913. Menke no.: 70536.
€276,38 €228,41 €262,55 €216,98
 
GRANIT Window rubber clamping range 1 - 4 mm, b 19,4 mm, h 14,5 mm - 5 meter
5%
GRANIT
Window rubber clamping range 1 - 4 mm, b 19,4 mm, h 14,5 mm - 5 meter
Clamping range: 1 - 4 mm. Length: 5 m. B: 19,4 mm. H: 14,5 mm.
€56,00 €46,28 €53,20 €43,97
 
Alternator 14 V / 33 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
10%
Alternator 14 V / 33 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Antonio Carraro, Case IH, Deutz-Fahr, Fendt, Goldoni, Holder, Renault...
€198,98 €164,45 €180,00 €148,76
 
GRANIT Replacement key lock number 14610 - 2 pieces
GRANIT
Replacement key lock number 14610 - 2 pieces
Locking number: 14610. Version: Locking no. 14610.
€15,00 €12,40
 
Window rubber clamping range 2,2 mm, b 24 mm, h 22 mm - 5 meter
5%
Window rubber clamping range 2,2 mm, b 24 mm, h 22 mm - 5 meter
Clamping range: 2,2 mm. Length: 5 m. B: 24 mm. H: 22 mm.
€44,47 €36,75 €42,20 €34,88
 
GRANIT Piston set, complete Ø 100 mm, combustion chamber 55 mm
5%
GRANIT
Piston set, complete Ø 100 mm, combustion chamber 55 mm
Dimensions: 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion chamber Ø 55...
€146,05 €120,70 €138,70 €114,63
 
Control unit linkage 220 bar, 220 x Ø 57,9 mm Deutz SD60
5%
Control unit linkage 220 bar, 220 x Ø 57,9 mm Deutz SD60
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 40 l/m...
€617,71 €510,50 €586,80 €484,96
 
Brake cylinder rear drum brake bore Ø 38,1 mm, DOT4 Deutz-Fahr
5%
Brake cylinder rear drum brake bore Ø 38,1 mm, DOT4 Deutz-Fahr
Medium: DOT4. Hole Ø: 38.1 mm.
€440,92 €364,40 €418,85 €346,16
 
GRANIT Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
GRANIT
Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, ...
€35,00 €28,93
 
GRANIT End control unit single-acting 210 bar, M18 x 1,5 Deutz D 2506 - D 4006
5%
GRANIT
End control unit single-acting 210 bar, M18 x 1,5 Deutz D 2506 - D 4006
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: max. 25 l/m...
€553,67 €457,58 €525,95 €434,67
 
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
5%
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
€287,19 €237,35 €272,80 €225,45
 
VICTOR REINZ Crankshaft seal rear Fendt, Deutz-Fahr
5%
VICTOR REINZ
Crankshaft seal rear Fendt, Deutz-Fahr
€41,09 €33,96 €39,00 €32,23
 
GRANIT Valve seat ring inlet valve Fendt, Deutz-Fahr
5%
GRANIT
Valve seat ring inlet valve Fendt, Deutz-Fahr
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€34,09 €28,17 €32,35 €26,74
 
BOSCH Start switch pull switch with gear change knob, Ø 10,5 mm
12%
BOSCH
Start switch pull switch with gear change knob, Ø 10,5 mm
Version: Galvanised steel housing, including black control button, Power rating:...
€66,67 €55,10 €58,95 €48,72
 
HELLA Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with cable
HELLA
Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with cable
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard warning l...
€77,45 €64,01
 
LUK Double clutch 310/280TGU 36 x 42 mm, 8 splines Deutz-Fahr
10%
LUK
Double clutch 310/280TGU 36 x 42 mm, 8 splines Deutz-Fahr
Dimensions (mm): 36 x 42 8 grooves | Flywheel dimension (mm): 3 (erhöht)
€1.006,48 €831,80 €910,60 €752,56
 
Hydraulic cylinder telescopic axle Deutz-Fahr
5%
Hydraulic cylinder telescopic axle Deutz-Fahr
€591,98 €489,24 €562,35 €464,75
 
Ball joint 60 mm, M27 x 1,5, M18 x 1,5, taper 29 - 32 mm
5%
Ball joint 60 mm, M27 x 1,5, M18 x 1,5, taper 29 - 32 mm
A: 60 mm. C: M27 x 1,5 mm. D: M18 x 1,5 mm. E: 29 mm. F: 32 mm. Taper: 29 - 32 m...
€97,37 €80,47 €92,50 €76,45
 
Steering column switch built-in, shift linkage 126 mm, blade terminal 8-pin
10%
Steering column switch built-in, shift linkage 126 mm, blade terminal 8-pin
Version: Mounting, functions: indicators, horn, dipped beam/full beam changeover...
€77,18 €63,79 €69,80 €57,69
 
LUK Clutch kit Deutz-Fahr D 6006 - D 7807, DX 3.70 - 3.90
5%
LUK
Clutch kit Deutz-Fahr D 6006 - D 7807, DX 3.70 - 3.90
Contents: Pressure plate 458231003111, clutch plate 458328012216
€1.044,84 €863,50 €992,55 €820,29
 
GRANIT Cylinder head Deutz-Fahr
5%
GRANIT
Cylinder head Deutz-Fahr
Engine types: BFL913, BFL913T.
€283,89 €234,62 €269,65 €222,85
 
Repair set feed pump set of parts outer-Ø 41 mm
Repair set feed pump set of parts outer-Ø 41 mm
To fit as: Pierburg and Imsa.
€19,15 €15,83
 
Showing 1 - 24 of 213

Deutz D 7007 parts for a classic that still works for a living

On plenty of farms a D 7007 from the 07 series still pulls the trailer or the muck spreader. To keep it that way there are more than 200 parts for this model, from GRANIT, LUK, HELLA, Bosch/Rexroth and VICTOR REINZ.

Brakes, steering and clutch

For the brakes you will find brake shoes and the matching return springs. Always fit new springs with new shoes. A spring that has been heat cycled for years loses tension and lets the shoe drag lightly on the drum, which shows up as a warm drum after a run on the road.

On the steering side there are ball joints and a bolt set for the steering valve. If the steering has play, have someone rock the wheel back and forth while you feel each joint by hand. That quickly tells you which one is worn. Use a fresh split pin every time you refit a joint.

For the clutch there are clutch plates and thrust bearings, including a sealed release bearing for the main clutch.

Engine and fuel system

Around the Deutz engine there are crankshaft seals, sealing rings and shims. On the exhaust side you will find exhaust manifolds and gaskets. Old manifold studs and nuts often come off with half the rust attached, so use new fixings and a new gasket, or the joint will be blowing again within weeks.

In the fuel system, a repair set for the feed pump helps when the engine is slow to fire or needs lengthy bleeding after standing. A lockable tank cap with a vent is also available.

For the electrics there are starter motors and alternators. A sluggish starter is not always at fault itself, so check the battery terminals and the earth connection first.

Working out what you need

On a tractor of this age, something has usually been replaced along the way. That makes it worth laying the old part next to the new one. A number stamped into or printed on the part is the quickest point of comparison. The tractor type plate gives the model and chassis number, which help when you are choosing between two versions of a clutch plate or starter.

These Deutz tractors from the same 07 series have their own pages too:

Useful when there is more than one classic in the yard. Newer and other models are under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart