Menu
EUR

Tractor parts Deutz-Fahr DX 6.10

Looking for parts for your Deutz-Fahr DX 6.10 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

313 parts found for Deutz-Fahr DX 6.10
Show:
Starter motor 12 V, 2,7 kW, 9 teeth, 223 mm, clockwise
Nominal voltage (V): 12 | Nominal power (kW): 2,7 | No. of pinion teeth: 9 | Holes / PCD (mm): 3 x 10,7 / 127,0 | Spacing flange to flywheel (mm): 28,... More
Nominal voltage (V): 12 | Nominal power (kW): 2,7 | No. of pinion teet...
€297,93 €246,22 €271,20 €224,13
You save 9%
Scharmüller Drawbar frame 74 kN, 3000 kg, rail 330 mm, pin Ø 25 mm, draw pendulum
Scharmüller
D-value (kN): 74 | Version: Prepared for drawbar | Rail width (mm): 330 | Detent pin Ø (mm): 25 | Load capacity (kg): 3000 | Colour: Kubota grey | Gu... More
D-value (kN): 74 | Version: Prepared for drawbar | Rail width (mm): 33...
€1.288,81 €1.065,13 €1.241,26 €1.025,83
You save 4%
Clutch master cylinder Ø 25,4 mm gray cast iron Deutz-Fahr
Material: Grey cast iron | Hole Ø (mm): 25.4 More
Material: Grey cast iron | Hole Ø (mm): 25.4
€280,27 €231,63 €255,15 €210,87
You save 9%
LUK Clutch kit 44 x 48 mm, 22 splines Deutz-Fahr
LUK
Contents: Pressure plate 458231003810, clutch plate 458331011610 | Dimensions (mm): 44 x 48 22 grooves 44 x 48 22 grooves More
Contents: Pressure plate 458231003810, clutch plate 458331011610 | Dim...
€1.371,22 €1.133,24 €1.312,70 €1.084,88
You save 4%
Thrust bearing closed version 106 x 140 x 25 mm
Dimensions (mm): 106 x 140 x 25 More
Dimensions (mm): 106 x 140 x 25
€134,70 €111,32 €122,60 €101,32
You save 9%
Alternator 14 V, 55 A, flange 56 mm, Deutz-Fahr, Fendt
Belt width (mm) / type: - | Charging current (A): 55 | Nominal values (V / A): 14 / 55 | Flange size (mm): 56,0 | Installation angle (°): l 60 | Pull... More
Belt width (mm) / type: - | Charging current (A): 55 | Nominal values ...
€161,58 €133,54 €147,00 €121,49
You save 9%
FEBI Axial joint 208 mm, Ø 56 mm, M22 x 1,5 / M22 x 1,5
€212,35 €175,50 €38,55 €31,86
You save 82%
ZF Oil seal 140 x 165 x 13/16,5 mm ZF front axle 4472058008
€94,23 €77,88 €85,75 €70,87
You save 9%
Universal joint 30,2 x 82 mm, bush lubrication
A: 30,2 mm. B: 82 mm. Universal joint size: . Lubrication system: Bush lubrication. More
A: 30,2 mm. B: 82 mm. Universal joint size: . Lubrication system: Bush...
€171,77 €141,96 €156,35 €129,21
You save 9%
GRANIT Ball joint 365 mm, M22 x 1,5, taper 24 - 26 mm
GRANIT
A: 365 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 365 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€166,86 €137,90 €151,90 €125,54
You save 9%
Repair set clutch cylinder DOT4 ATE version
Medium: DOT4. Additional information: Without piston. More
Medium: DOT4. Additional information: Without piston.
€57,41 €47,45 €52,25 €43,18
You save 9%
Repair set brake cylinder DOT4 Deutz-Fahr
Medium: DOT4. Additional information: Without piston. More
Medium: DOT4. Additional information: Without piston.
€46,06 €38,07 €41,90 €34,63
You save 9%
LUK Pilot bearing 20 x 52 x 15 mm
LUK
Dimensions: 20 x 52 x 15 mm. More
Dimensions: 20 x 52 x 15 mm.
€32,83 €27,13 €32,45 €26,82
You save 1%
GRANIT Repair set foot brake ATE version Deutz-Fahr DX
€48,84 €40,36 €44,45 €36,74
You save 9%
GRANIT Brake caliper ATE bottom left, DOT 4, without brake pads
GRANIT
Description: Bottom left, Suitable brake pad set 71704019. More
Description: Bottom left, Suitable brake pad set 71704019.
€922,99 €762,80 €840,25 €694,42
You save 9%
Fixed caliper, complete ATE bottom right, DOT 4, without brake pads
Description: Suitable brake pad set 71704019. More
Description: Suitable brake pad set 71704019.
€991,80 €819,67 €902,90 €746,20
You save 9%
GRANIT Oil dipstick 130 mm Deutz-Fahr
GRANIT
Dimensions (mm): Length = 130. More
Dimensions (mm): Length = 130.
€39,08 €32,30 €35,55 €29,38
You save 9%
GRANIT V-belt Deutz-Fahr DX 86, DX 92, DX 4.50-6.30
€47,75 €39,46 €43,45 €35,91
You save 9%
GRANIT V-belt Deutz-Fahr DX 6.10 - DX 120, D 8006 - D 10006
€43,26 €35,75 €39,35 €32,52
You save 9%
GRANIT Flame glow plug 11 V, 20 A, thread M20 x 1,5 Deutz Agrolux 60-90
GRANIT
Version: 11 V, 20 A, thread M20 x 1.5. More
Version: 11 V, 20 A, thread M20 x 1.5.
€96,62 €79,85 €87,95 €72,69
You save 9%
Sealing ring for injection nozzle Ø 19 x 9,2 mm, 2 mm thick, copper Deutz-Fahr
Outer Ø: 19 mm. Inner Ø: 9,2 mm. Material: copper. Thickness: 2 mm. More
Outer Ø: 19 mm. Inner Ø: 9,2 mm. Material: copper. Thickness: 2 mm.
€2,90 €2,40
GRANIT Piston ring set 4 rings, Ø 100 mm, 2,5/2,5/2,5/5 mm Deutz-Fahr
GRANIT
Dimensions: 4 rings, Ø 100 mm, 2.5 mm (trapezoidal ring), 2.5 mm, 2.5 mm, 5 mm. More
Dimensions: 4 rings, Ø 100 mm, 2.5 mm (trapezoidal ring), 2.5 mm, 2.5...
€109,98 €90,89 €100,10 €82,73
You save 9%
GRANIT Gasket exhaust Deutz DX 85-120, DX 6.10-6.30
€34,72 €28,69 €31,60 €26,12
You save 9%
Showing 217 - 240 of 313

Parts for your Deutz-Fahr DX 6.10 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 6.10. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 6.10. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 6.10. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart