Menu
EUR

Tractor parts Deutz-Fahr DX 6.10

Looking for parts for your Deutz-Fahr DX 6.10 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

313 parts found for Deutz-Fahr DX 6.10
Show:
Starter motor 12 V, 2,7 kW, 9 teeth, 223 mm, clockwise
9%
Starter motor 12 V, 2,7 kW, 9 teeth, 223 mm, clockwise
Nominal voltage (V): 12 | Nominal power (kW): 2,7 | No. of pinion teeth: 9 | Hol...
€297,93 €246,22 €271,20 €224,13
 
Scharmüller Drawbar frame 74 kN, 3000 kg, rail 330 mm, pin Ø 25 mm, draw pendulum
4%
Scharmüller
Drawbar frame 74 kN, 3000 kg, rail 330 mm, pin Ø 25 mm, draw pendulum
D-value (kN): 74 | Version: Prepared for drawbar | Rail width (mm): 330 | Detent...
€1.288,81 €1.065,13 €1.241,26 €1.025,83
 
Clutch master cylinder Ø 25,4 mm gray cast iron Deutz-Fahr
9%
Clutch master cylinder Ø 25,4 mm gray cast iron Deutz-Fahr
Material: Grey cast iron | Hole Ø (mm): 25.4
€280,27 €231,63 €255,15 €210,87
 
LUK Clutch kit 44 x 48 mm, 22 splines Deutz-Fahr
4%
LUK
Clutch kit 44 x 48 mm, 22 splines Deutz-Fahr
Contents: Pressure plate 458231003810, clutch plate 458331011610 | Dimensions (m...
€1.371,22 €1.133,24 €1.312,70 €1.084,88
 
Thrust bearing closed version 106 x 140 x 25 mm
9%
Thrust bearing closed version 106 x 140 x 25 mm
Dimensions (mm): 106 x 140 x 25
€134,70 €111,32 €122,60 €101,32
 
Alternator 14 V, 55 A, flange 56 mm, Deutz-Fahr, Fendt
9%
Alternator 14 V, 55 A, flange 56 mm, Deutz-Fahr, Fendt
Belt width (mm) / type: - | Charging current (A): 55 | Nominal values (V / A): 1...
€161,58 €133,54 €147,00 €121,49
 
FEBI Axial joint 208 mm, Ø 56 mm, M22 x 1,5 / M22 x 1,5
82%
FEBI
Axial joint 208 mm, Ø 56 mm, M22 x 1,5 / M22 x 1,5
€212,35 €175,50 €38,55 €31,86
 
ZF Oil seal 140 x 165 x 13/16,5 mm ZF front axle 4472058008
9%
ZF
Oil seal 140 x 165 x 13/16,5 mm ZF front axle 4472058008
€94,23 €77,88 €85,75 €70,87
 
Universal joint 30,2 x 82 mm, bush lubrication
9%
Universal joint 30,2 x 82 mm, bush lubrication
A: 30,2 mm. B: 82 mm. Universal joint size: . Lubrication system: Bush lubricati...
€171,77 €141,96 €156,35 €129,21
 
GRANIT Ball joint 365 mm, M22 x 1,5, taper 24 - 26 mm
9%
GRANIT
Ball joint 365 mm, M22 x 1,5, taper 24 - 26 mm
A: 365 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 ...
€166,86 €137,90 €151,90 €125,54
 
Repair set clutch cylinder DOT4 ATE version
9%
Repair set clutch cylinder DOT4 ATE version
Medium: DOT4. Additional information: Without piston.
€57,41 €47,45 €52,25 €43,18
 
Repair set brake cylinder DOT4 Deutz-Fahr
9%
Repair set brake cylinder DOT4 Deutz-Fahr
Medium: DOT4. Additional information: Without piston.
€46,06 €38,07 €41,90 €34,63
 
LUK Pilot bearing 20 x 52 x 15 mm
1%
LUK
Pilot bearing 20 x 52 x 15 mm
Dimensions: 20 x 52 x 15 mm.
€32,83 €27,13 €32,45 €26,82
 
GRANIT Repair set foot brake ATE version Deutz-Fahr DX
9%
GRANIT
Repair set foot brake ATE version Deutz-Fahr DX
€48,84 €40,36 €44,45 €36,74
 
GRANIT Brake caliper ATE bottom left, DOT 4, without brake pads
9%
GRANIT
Brake caliper ATE bottom left, DOT 4, without brake pads
Description: Bottom left, Suitable brake pad set 71704019.
€922,99 €762,80 €840,25 €694,42
 
Fixed caliper, complete ATE bottom right, DOT 4, without brake pads
9%
Fixed caliper, complete ATE bottom right, DOT 4, without brake pads
Description: Suitable brake pad set 71704019.
€991,80 €819,67 €902,90 €746,20
 
GRANIT Oil dipstick 130 mm Deutz-Fahr
9%
GRANIT
Oil dipstick 130 mm Deutz-Fahr
Dimensions (mm): Length = 130.
€39,08 €32,30 €35,55 €29,38
 
GRANIT V-belt Deutz-Fahr DX 86, DX 92, DX 4.50-6.30
9%
GRANIT
V-belt Deutz-Fahr DX 86, DX 92, DX 4.50-6.30
€47,75 €39,46 €43,45 €35,91
 
GRANIT V-belt Deutz-Fahr DX 6.10 - DX 120, D 8006 - D 10006
9%
GRANIT
V-belt Deutz-Fahr DX 6.10 - DX 120, D 8006 - D 10006
€43,26 €35,75 €39,35 €32,52
 
GRANIT Flame glow plug 11 V, 20 A, thread M20 x 1,5 Deutz Agrolux 60-90
9%
GRANIT
Flame glow plug 11 V, 20 A, thread M20 x 1,5 Deutz Agrolux 60-90
Version: 11 V, 20 A, thread M20 x 1.5.
€96,62 €79,85 €87,95 €72,69
 
Sealing ring for injection nozzle Ø 19 x 9,2 mm, 2 mm thick, copper Deutz-Fahr
Sealing ring for injection nozzle Ø 19 x 9,2 mm, 2 mm thick, copper Deutz-Fahr
Outer Ø: 19 mm. Inner Ø: 9,2 mm. Material: copper. Thickness: 2 mm.
€2,90 €2,40
 
GRANIT Piston ring set 4 rings, Ø 100 mm, 2,5/2,5/2,5/5 mm Deutz-Fahr
9%
GRANIT
Piston ring set 4 rings, Ø 100 mm, 2,5/2,5/2,5/5 mm Deutz-Fahr
Dimensions: 4 rings, Ø 100 mm, 2.5 mm (trapezoidal ring), 2.5 mm, 2.5 mm, 5 mm.
€109,98 €90,89 €100,10 €82,73
 
GRANIT Gasket exhaust Deutz DX 85-120, DX 6.10-6.30
9%
GRANIT
Gasket exhaust Deutz DX 85-120, DX 6.10-6.30
€34,72 €28,69 €31,60 €26,12
 
Showing 217 - 240 of 313

Parts for your Deutz-Fahr DX 6.10 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 6.10. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 6.10. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 6.10. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart