Menu
EUR

Deutz-Fahr AgroPrima 6.06 tractor parts & technical data

With more than 300 parts, the Deutz-Fahr AgroPrima 6.06 is well covered on this page. Trailer couplings, lighting and electrics are each grouped together.

318 parts found for Deutz-Fahr AgroPrima 6.06
Show:
MAHLE Alternator 14 V / 65 A, flange 56 mm, form B Deutz-Fahr, Fendt, Steyr
40%
MAHLE
Alternator 14 V / 65 A, flange 56 mm, form B Deutz-Fahr, Fendt, Steyr
Nominal values (V / A): 14 / 65 | Direction of rotation: ↻ | Additional informat...
€326,57 €269,89 €195,60 €161,65
 
Clutch cable driving clutch 1285 mm, sleeve 955 mm, M8, M12 Deutz-Fahr
8%
Clutch cable driving clutch 1285 mm, sleeve 955 mm, M8, M12 Deutz-Fahr
Sleeve length (mm): 955 | Cable length (mm): 1285 | Thread: M08, M12
€91,49 €75,61 €84,17 €69,56
 
Filter dryer airco Ø 102 mm, 190 mm, F/M #6 O-ring, steel
8%
Filter dryer airco Ø 102 mm, 190 mm, F/M #6 O-ring, steel
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ring | Dimens...
€65,38 €54,03 €60,15 €49,71
 
Thrust bearing closed version 106 x 140 x 25 mm
8%
Thrust bearing closed version 106 x 140 x 25 mm
Dimensions (mm): 106 x 140 x 25
€134,70 €111,32 €123,92 €102,42
 
MAHLE Alternator 14 V, 65 A, flange 56 mm, with fan
40%
MAHLE
Alternator 14 V, 65 A, flange 56 mm, with fan
Belt width (mm) / type: - | Direction of rotation: ↻ | Nominal values (V / A): 1...
€303,54 €250,86 €181,80 €150,25
 
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VI
GRAMMER
Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VI
Joystick console: Yes | Seat width (mm): 530 | Height (mm): 754 | Restraint syst...
€2.293,87 €1.895,76
 
FEBI Fuel filter WK842
57%
FEBI
Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
 
FEBI Axial joint 208 mm, Ø 56 mm, M22 x 1,5 / M22 x 1,5
82%
FEBI
Axial joint 208 mm, Ø 56 mm, M22 x 1,5 / M22 x 1,5
€212,35 €175,50 €38,55 €31,86
 
BOSCH Gear reduction starter 12 V, 3,0 kW, 9 teeth, Ø 89 mm, flange 31 mm
4%
BOSCH
Gear reduction starter 12 V, 3,0 kW, 9 teeth, Ø 89 mm, flange 31 mm
€512,28 €423,37 €493,38 €407,75
 
BOSCH Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
4%
BOSCH
Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
€569,55 €470,70 €548,54 €453,34
 
Knott Industrietechnik Bleed valve Knott version Deutz
Knott Industrietechnik
Bleed valve Knott version Deutz
€15,98 €13,20
 
Master brake cylinder piston Ø 19,05 mm, DOT 4 Deutz-Fahr
8%
Master brake cylinder piston Ø 19,05 mm, DOT 4 Deutz-Fahr
Hole Ø: 19.05 mm.
€483,27 €399,40 €444,61 €367,45
 
MANN-FILTER Filter set engine oil filter, air filter, hydraulic filter
40%
MANN-FILTER
Filter set engine oil filter, air filter, hydraulic filter
To fit: Deutz. To fit type: AgroPrima, AgroXtra. Set consisting of: Engine oil f...
€251,53 €207,88 €150,65 €124,50
 
Repair set feed pump set of parts outer-Ø 41 mm Deutz-Fahr, Linde
Repair set feed pump set of parts outer-Ø 41 mm Deutz-Fahr, Linde
Version: Set of parts.
€20,01 €16,54
 
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm.
€33,53 €27,71
 
Valve stem seal Deutz-Fahr
Valve stem seal Deutz-Fahr
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€5,00 €4,13
 
O-ring feed pump Ø 38 x 3 mm Deutz engine 912, 913W/T
O-ring feed pump Ø 38 x 3 mm Deutz engine 912, 913W/T
Version: Ø 38 x 3 mm.
€7,99 €6,60
 
Force sensor pin 60 kN, 160 mm, Ø 36,8 mm Deutz-Fahr, Lamborghini
8%
Force sensor pin 60 kN, 160 mm, Ø 36,8 mm Deutz-Fahr, Lamborghini
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm.
€374,78 €309,74 €344,80 €284,96
 
Start switch 12 V / 24 V, built-in-Ø 28 mm - 2 keys
8%
Start switch 12 V / 24 V, built-in-Ø 28 mm - 2 keys
To fit as: Case IH 485XL, 585, 585XL, 685, 685XL, 785XL, 885, 885XL 743XL, 745XL...
€48,78 €40,31 €44,88 €37,09
 
LUK Clutch kit Ø 280 mm Deutz-Fahr AgroPrima 4.31 - 6.16, DX 4.10 - 120
4%
LUK
Clutch kit Ø 280 mm Deutz-Fahr AgroPrima 4.31 - 6.16, DX 4.10 - 120
Contents: Pressure plate 458231002017, clutch plate 458328011616
€1.199,68 €991,47 €1.153,71 €953,48
 
Bosch/Rexroth Hydraulic pump 19 cm³ anticlockwise, taper 1:5, Ø 17 x 17 Deutz-Fahr
8%
Bosch/Rexroth
Hydraulic pump 19 cm³ anticlockwise, taper 1:5, Ø 17 x 17 Deutz-Fahr
Bosch no.: 1517222716 | Direction of rotation: Anticlockwise | Output volume (cc...
€633,15 €523,26 €582,50 €481,40
 
Bosch/Rexroth Hydraulic pump 11 cm³/rpm., claw 17,8 x 8, left Deutz-Fahr
8%
Bosch/Rexroth
Hydraulic pump 11 cm³/rpm., claw 17,8 x 8, left Deutz-Fahr
Direction of rotation: Anticlockwise | Output volume (cc/rev): 11 | Drive shaft:...
€469,70 €388,18 €432,12 €357,13
 
Scharmüller Clutch complete type 1120 coupling pin 38 mm, nose weight 1250 kg
8%
Scharmüller
Clutch complete type 1120 coupling pin 38 mm, nose weight 1250 kg
Hole (mm): M20 | Overhang (mm): 211 | Thread: M20 | Lock: Automatic | Internal w...
€1.364,15 €1.127,40 €1.261,52 €1.042,58
 
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, fan
40%
MAHLE
Alternator 14 V / 120 A, flange 56 mm, form B, fan
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | Installation...
€468,16 €386,91 €280,40 €231,74
 
SACHS Thrust bearing 106 x 140 x 25 mm
8%
SACHS
Thrust bearing 106 x 140 x 25 mm
Dimensions (mm): 106 x 140 x 25
€205,54 €169,87 €189,10 €156,28
 
LUK Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
8%
LUK
Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
Dimensions (mm): 20 x 52 x 15
€35,51 €29,35 €32,67 €27,00
 
LUK Clutch plate 280UKF 31 x 36 mm, 16 splines Deutz-Fahr
8%
LUK
Clutch plate 280UKF 31 x 36 mm, 16 splines Deutz-Fahr
Dimensions (mm): 31 x 36 16 grooves
€215,77 €178,32 €198,51 €164,06
 
Clutch plate 310, 31 x 36 mm, 16 splines Deutz-Fahr
8%
Clutch plate 310, 31 x 36 mm, 16 splines Deutz-Fahr
Additional information: Made in Germany | Dimensions (mm): 31 x 36, 16 grooves
€199,10 €164,55 €183,17 €151,38
 
MAHLE Alternator 14 V, 55 A, flange 56 mm Deutz-Fahr, Fendt
40%
MAHLE
Alternator 14 V, 55 A, flange 56 mm Deutz-Fahr, Fendt
Direction of rotation: ↻ | Belt width (mm) / type: - | Mounting L / d / R (mm): ...
€319,94 €264,41 €191,62 €158,36
 
Alternator 14 V / 80 A, flange 55,5 mm
8%
Alternator 14 V / 80 A, flange 55,5 mm
Belt width (mm) / type: - | Pulley spacing (mm): - | Direction of rotation: ↻ | ...
€236,43 €195,40 €217,52 €179,77
 
Alternator 14 V, 55 A, flange 56 mm, Deutz-Fahr, Fendt
8%
Alternator 14 V, 55 A, flange 56 mm, Deutz-Fahr, Fendt
Belt width (mm) / type: - | Charging current (A): 55 | Nominal values (V / A): 1...
€161,58 €133,54 €148,65 €122,85
 
Elring Cylinder head bolt set M12 x 1,75 x 211 mm, wrench size 17 - 4 pieces
8%
Elring
Cylinder head bolt set M12 x 1,75 x 211 mm, wrench size 17 - 4 pieces
Notes: Set of 4 | Dimensions (mm): M12 x 1.75 x 211 | Supplementary set: For one...
€118,56 €97,98 €109,08 €90,14
 
Starter motor with reduction 12 V, 2,7 kW, 9 teeth, 208,5 mm
8%
Starter motor with reduction 12 V, 2,7 kW, 9 teeth, 208,5 mm
€541,43 €447,46 €498,12 €411,67
 
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
8%
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
Version: Ø 393/364 mm, 129 teeth.
€82,99 €68,59 €76,35 €63,10
 
Seal feed pump
Seal feed pump
€2,89 €2,39
 
HELLA Indicator/position light 120 x 80 x 55 mm, P21W, R5W left / right
HELLA
Indicator/position light 120 x 80 x 55 mm, P21W, R5W left / right
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Attachment: Front. Co...
€28,18 €23,29
 
SACHS Thrust bearing 65 x 96 x 23 mm
8%
SACHS
Thrust bearing 65 x 96 x 23 mm
Dimensions (mm): 65 x 96 x 23
€140,56 €116,17 €129,32 €106,87
 
LUK Clutch plate 310UKF 31 x 35 mm 16 splines Deutz-Fahr
8%
LUK
Clutch plate 310UKF 31 x 35 mm 16 splines Deutz-Fahr
Dimensions (mm): 31 x 35 16 grooves
€250,68 €207,17 €230,63 €190,60
 
Clutch plate 280, 31 x 36 mm, 16 splines Deutz-Fahr
8%
Clutch plate 280, 31 x 36 mm, 16 splines Deutz-Fahr
Dimensions (mm): 31 x 36, 16 grooves | Additional information: Made in Germany
€145,49 €120,24 €133,85 €110,62
 
Elring Crankshaft seal rear 115 x 140 x 13 mm, FPM, engine FL912 - BFL913
8%
Elring
Crankshaft seal rear 115 x 140 x 13 mm, FPM, engine FL912 - BFL913
Width (mm): 13 | Inner Ø (mm): 115 | Outer Ø (mm): 140 | Material: FPM (fluoro r...
€70,51 €58,27 €64,87 €53,61
 
Master brake cylinder Ø 20,64 mm, DOT4 Deutz-Fahr AgroPrima, AgroXtra
8%
Master brake cylinder Ø 20,64 mm, DOT4 Deutz-Fahr AgroPrima, AgroXtra
Medium: DOT4. Hole Ø: 20.64 mm.
€629,26 €520,05 €578,92 €478,45
 
Push rod brake cylinder DOT4 Deutz-Fahr
8%
Push rod brake cylinder DOT4 Deutz-Fahr
Medium: DOT4.
€36,41 €30,09 €33,50 €27,68
 
Fixed caliper, complete without brake lining Knott top left, DOT 4
8%
Fixed caliper, complete without brake lining Knott top left, DOT 4
€783,82 €647,79 €721,11 €595,96
 
PTO shaft end piece 299 mm, 1 3/8" 6 spline, 540 rpm Deutz-Fahr
8%
PTO shaft end piece 299 mm, 1 3/8" 6 spline, 540 rpm Deutz-Fahr
Version: Length 299 mm, 1 3/8", 6 splines, for 540 rpm.
€467,30 €386,20 €429,92 €355,30
 
VICTOR REINZ Valve cover gasket Deutz engine FL912, FL913, BFL913
VICTOR REINZ
Valve cover gasket Deutz engine FL912, FL913, BFL913
€10,01 €8,27
 
Showing 49 - 96 of 318

Deutz-Fahr AgroPrima 6.06 parts

An AgroPrima 6.06 tends to stay on the farm for many seasons, and sooner or later the clutch, brakes and charging system need attention. This page carries more than 300 parts for the 6.06, from brands such as GRANIT, HELLA, ROCKINGER, LUK and MAHLE.

For the clutch there are clutch kits, thrust bearings and crankshaft seals. If you are splitting the tractor for a new clutch, change the thrust bearing and the seal while it is apart. A whining bearing or a seal that lets oil onto the plate will otherwise have you splitting it again before long. Look at the flywheel too. Scoring or blue heat marks mean the face needs machining before the new plate goes in.

Brakes and hydraulics

The braking side is covered by fixed calipers and bleed valves. After fitting a caliper, bleed the system starting from the furthest point and keep going until no more bubbles appear. A seized bleed valve is better replaced than forced, because one snapped off inside the caliper costs far more time. For the linkage there are sealing rings for the lift shaft, and repair sets for parts such as the feed pump.

Charging, starting and hitching

Alternators and starter motors keep the AgroPrima running, while push button switches operate items like the work lights. In the cab, gas struts hold the door, front or rear window open. For hitching there are drawbars, drawbar frames and trailer couplings, including ROCKINGER. Exhaust gaskets round off the list.

An alternator that has stopped charging is not always faulty itself. First check whether the charge warning light comes on with the ignition. If it stays dark, the alternator is not being excited and the fault usually lies in the wire or the bulb. After fitting a starter motor, clean all the earth connections or the slow start may come back. A drawbar should slide easily in the rail of its frame, so clean the rail and give it a thin coat of grease to keep the locking reliable. An exhaust gasket is always fitted new, even if the old one still looks intact.

What fits your 6.06

Check the type plate to confirm it is the AgroPrima 6.06, and if in doubt note the number on the old part. Compare that with the reference number shown for the product. With alternators and starter motors that share the same housing shape, this is what prevents a wrong order.

The Deutz-Fahr AgroPrima 6.16 from the same series has its own page with the parts that fit it. Any other Deutz-Fahr tractor can be picked from Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart