Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Deutz D 7007 tractor parts & technical data

If the lights on your Deutz D 7007 have failed or the electrics are playing up, this page lists more than 200 parts that fit this 07 series tractor.

214 parts found for Deutz-Fahr D 7007
Show:
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm.
€33,53 €27,71
 
SACHS Clutch plate 280, 26 x 32 mm, 10 splines Deutz-Fahr
8%
SACHS
Clutch plate 280, 26 x 32 mm, 10 splines Deutz-Fahr
Dimensions (mm): 26 x 32 10 grooves
€208,33 €172,17 €191,66 €158,40
 
SACHS Thrust bearing 55 x 91 x 22 mm Deutz-Fahr D 6006-D 7807, DX 80-DX 120
8%
SACHS
Thrust bearing 55 x 91 x 22 mm Deutz-Fahr D 6006-D 7807, DX 80-DX 120
Dimensions (mm): 55 x 91 x 22
€215,70 €178,26 €198,44 €164,00
 
LUK Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
8%
LUK
Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
Dimensions (mm): 20 x 52 x 15
€35,51 €29,35 €32,67 €27,00
 
LUK Clutch plate 250 26 x 32 mm, 10 splines Deutz-Fahr
8%
LUK
Clutch plate 250 26 x 32 mm, 10 splines Deutz-Fahr
Dimensions (mm): 26 x 32 10 grooves
€181,02 €149,60 €166,54 €137,64
 
Thrust bearing single PTO clutch 70 x 110 x 20 mm
8%
Thrust bearing single PTO clutch 70 x 110 x 20 mm
Dimensions (mm): 70 x 110 x 20
€36,11 €29,84 €33,22 €27,46
 
Elring Cylinder head bolt set M12 x 1,75 x 211 mm, wrench size 17 - 4 pieces
8%
Elring
Cylinder head bolt set M12 x 1,75 x 211 mm, wrench size 17 - 4 pieces
Notes: Set of 4 | Dimensions (mm): M12 x 1.75 x 211 | Supplementary set: For one...
€118,56 €97,98 €109,08 €90,14
 
Starter motor with reduction 12 V, 2,7 kW, 9 teeth, 208,5 mm
8%
Starter motor with reduction 12 V, 2,7 kW, 9 teeth, 208,5 mm
€541,43 €447,46 €498,12 €411,67
 
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
8%
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
Version: Ø 393/364 mm, 129 teeth.
€82,99 €68,59 €76,35 €63,10
 
Oil cooler Fendt GT 380, Deutz-Fahr D 6806 - D 7207
8%
Oil cooler Fendt GT 380, Deutz-Fahr D 6806 - D 7207
€261,18 €215,85 €240,29 €198,58
 
Cylinder head Deutz-Fahr
8%
Cylinder head Deutz-Fahr
Engine types: BFL913, BFL913T.
€296,24 €244,83 €272,54 €225,24
 
Manifold gasket exhaust Fendt, Deutz-Fahr
Manifold gasket exhaust Fendt, Deutz-Fahr
Engine types: FL712, FL812.
€4,89 €4,04
 
Fastening hood Deutz-Fahr Series 07-07C, D 2807-7807C
8%
Fastening hood Deutz-Fahr Series 07-07C, D 2807-7807C
€61,44 €50,78 €56,52 €46,71
 
SACHS Thrust bearing 65 x 96 x 23 mm
8%
SACHS
Thrust bearing 65 x 96 x 23 mm
Dimensions (mm): 65 x 96 x 23
€140,56 €116,17 €129,32 €106,87
 
Clutch plate 280, 26 x 32 mm, 10 splines Deutz-Fahr
8%
Clutch plate 280, 26 x 32 mm, 10 splines Deutz-Fahr
Additional information: Made in Germany | Dimensions (mm): 26 x 32, 10 grooves
€179,76 €148,56 €165,38 €136,68
 
Double clutch DuT 310/280 36 x 42 mm, 8 splines organic
2%
Double clutch DuT 310/280 36 x 42 mm, 8 splines organic
Material specifications: Organic clutch lining | Additional information: Made in...
€793,63 €655,89 €780,14 €644,74
 
Track rod 1040 mm, taper 16 - 18 mm Deutz-Fahr D 6806 - D 7007
8%
Track rod 1040 mm, taper 16 - 18 mm Deutz-Fahr D 6806 - D 7007
A (mm): 1040 | G (mm): 16 - 18 | C (mm): 16 - 18
€825,18 €681,97 €759,17 €627,41
 
Elring Crankshaft seal rear 115 x 140 x 13 mm, FPM, engine FL912 - BFL913
8%
Elring
Crankshaft seal rear 115 x 140 x 13 mm, FPM, engine FL912 - BFL913
Width (mm): 13 | Inner Ø (mm): 115 | Outer Ø (mm): 140 | Material: FPM (fluoro r...
€70,51 €58,27 €64,87 €53,61
 
Push rod brake cylinder DOT4 Deutz-Fahr
8%
Push rod brake cylinder DOT4 Deutz-Fahr
Medium: DOT4.
€36,41 €30,09 €33,50 €27,68
 
Brake shoe Hand brake 180 x 40 mm Deutz
8%
Brake shoe Hand brake 180 x 40 mm Deutz
€52,18 €43,12 €48,01 €39,67
 
Cooling fan Ø 230 mm, pulley Ø 96 mm, built-in Ø 235 mm Deutz-Fahr
8%
Cooling fan Ø 230 mm, pulley Ø 96 mm, built-in Ø 235 mm Deutz-Fahr
Dimensions: Installation Ø 235, Vane Ø 230, Pulley Ø 96 mm mm.
€1.360,17 €1.124,11 €1.251,36 €1.034,18
 
Flame glow plug 9,5 V, 20 A, M20 x 1,5 Deutz, SAME, Deutz-Fahr
8%
Flame glow plug 9,5 V, 20 A, M20 x 1,5 Deutz, SAME, Deutz-Fahr
Version: 9.5 V, 20 A, thread M20 x 1.5. To fit: Deutz.
€78,62 €64,98 €72,33 €59,78
 
Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, ...
€36,59 €30,24
 
Connecting rod bolt M12 x 1,5 x 55 mm Deutz-Fahr
Connecting rod bolt M12 x 1,5 x 55 mm Deutz-Fahr
Dimensions: M12 x 1.5 x 55 mm.
€31,71 €26,21
 
Return line Fendt, Deutz-Fahr
8%
Return line Fendt, Deutz-Fahr
€178,93 €147,88 €164,62 €136,05
 
Bolt set 1ste steering valve 3x M8 x 90
Bolt set 1ste steering valve 3x M8 x 90
Technical data: 3x M8 x 90.
€18,40 €15,21
 
End control unit single-acting 210 bar, M18 x 1,5 Deutz D 2506 - D 4006
8%
End control unit single-acting 210 bar, M18 x 1,5 Deutz D 2506 - D 4006
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: max. 25 l/m...
€577,76 €477,49 €531,54 €439,29
 
Double hydraulic pump 16 + 11 cm³/rpm., taper 1:5 Ø 17 x 17
8%
Double hydraulic pump 16 + 11 cm³/rpm., taper 1:5 Ø 17 x 17
Output volume: 16 + 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Bosch no.: 051...
€686,70 €567,52 €631,76 €522,12
 
Bosch/Rexroth Double pump anticlockwise 16 + 11 cm³/rpm. Fendt, Steyr, Deutz-Fahr
8%
Bosch/Rexroth
Double pump anticlockwise 16 + 11 cm³/rpm. Fendt, Steyr, Deutz-Fahr
Output volume: 16 + 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pres...
€1.147,02 €947,95 €1.055,26 €872,11
 
Scharmüller Clutch hitches can be disconnected with bracket, 82,4 kN, working length 211 mm
Scharmüller
Clutch hitches can be disconnected with bracket, 82,4 kN, working length 211 mm
suitable for: Deutz-Fahr. Series: DX AgroPrima. Category: Hitches. Version: Can ...
€924,79 €764,29
 
Push button switch hazard lights 12 / 24 V red, with lock
8%
Push button switch hazard lights 12 / 24 V red, with lock
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6.3 x 0.8 (L...
€57,83 €47,79 €53,20 €43,97
 
Lamp socket intermediate part rear
8%
Lamp socket intermediate part rear
€36,81 €30,42 €33,87 €27,99
 
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 4...
€48,67 €40,22 €44,78 €37,01
 
Hydraulic pump 16,8 cm³, anticlockwise rotation, taper 17 mm
8%
Hydraulic pump 16,8 cm³, anticlockwise rotation, taper 17 mm
€132,96 €109,88 €122,32 €101,09
 
LUK Double clutch 310/280TGU 36 x 42 mm, 8 splines Deutz-Fahr
3%
LUK
Double clutch 310/280TGU 36 x 42 mm, 8 splines Deutz-Fahr
Dimensions (mm): 36 x 42 8 grooves | Flywheel dimension (mm): 3 (erhöht)
€1.000,25 €826,65 €970,23 €801,84
 
Seal kit Deutz-Fahr D 6806, Intrac 2004
Seal kit Deutz-Fahr D 6806, Intrac 2004
€152,08 €125,69
 
Ball joint 101 mm, taper 16,2 - 18,3 mm, M14 x 1,5, M20 x 1,5
8%
Ball joint 101 mm, taper 16,2 - 18,3 mm, M14 x 1,5, M20 x 1,5
A: 101 mm. C: M14 x 1,5 mm. D: M20 x 1,5 mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2...
€39,32 €32,50 €36,17 €29,90
 
Knott Industrietechnik Brake lining 250 x 70 mm Deutz 6005-7807, DX 3.70-3.90 VC
8%
Knott Industrietechnik
Brake lining 250 x 70 mm Deutz 6005-7807, DX 3.70-3.90 VC
€178,80 €147,77 €164,50 €135,95
 
Counterweight Deutz-Fahr engine F4L912, F4L913
8%
Counterweight Deutz-Fahr engine F4L912, F4L913
€1.757,35 €1.452,36 €1.616,76 €1.336,17
 
Exhaust manifold bottom hexagonal exhaust, 4 cylinder Deutz-Fahr
Exhaust manifold bottom hexagonal exhaust, 4 cylinder Deutz-Fahr
Version: downwards exhaust, 4-cylinder.
€1.150,51 €950,84
 
Thrust washer standard Deutz-Fahr
Thrust washer standard Deutz-Fahr
€33,84 €27,96
 
Tank cap with ventilation Lockable, tank collar Ø 106 mm
Tank cap with ventilation Lockable, tank collar Ø 106 mm
Filler neck Ø: 106 mm.
€34,99 €28,92
 
Maintenance switch filter
8%
Maintenance switch filter
Version: Filter.
€76,89 €63,55 €70,74 €58,46
 
Reflector
Reflector
To fit as: Case IH C 42, 48, 55, 64, 70, CS 48, 52, 58, 63, 68, 75, Deutz-Fahr A...
€6,68 €5,52
 
HELLA Rear light right Case IH, Deutz-Fahr, Fendt, John Deere, Steyr
HELLA
Rear light right Case IH, Deutz-Fahr, Fendt, John Deere, Steyr
To fit as: Case IH 433, 533, 633, 733, 833, 440, 540, 640, 740, 840, 940, 743 XL...
€28,56 €23,61
 
Exhaust manifold Deutz-Fahr series 07 4007-7207, 07C 4507C-7807C
8%
Exhaust manifold Deutz-Fahr series 07 4007-7207, 07C 4507C-7807C
To fit as: Deutz series 07, 4007, 4507, 4807, 5207, 6007, 6207, 6507, 6807, 6907...
€173,62 €143,49 €159,73 €132,01
 
Repair set feed pump set of parts outer-Ø 41 mm
Repair set feed pump set of parts outer-Ø 41 mm
To fit as: Pierburg and Imsa.
€20,01 €16,54
 
Showing 49 - 96 of 214

Deutz D 7007 parts for a classic that still works for a living

On plenty of farms a D 7007 from the 07 series still pulls the trailer or the muck spreader. To keep it that way there are more than 200 parts for this model, from GRANIT, LUK, HELLA, Bosch/Rexroth and VICTOR REINZ.

Brakes, steering and clutch

For the brakes you will find brake shoes and the matching return springs. Always fit new springs with new shoes. A spring that has been heat cycled for years loses tension and lets the shoe drag lightly on the drum, which shows up as a warm drum after a run on the road.

On the steering side there are ball joints and a bolt set for the steering valve. If the steering has play, have someone rock the wheel back and forth while you feel each joint by hand. That quickly tells you which one is worn. Use a fresh split pin every time you refit a joint.

For the clutch there are clutch plates and thrust bearings, including a sealed release bearing for the main clutch.

Engine and fuel system

Around the Deutz engine there are crankshaft seals, sealing rings and shims. On the exhaust side you will find exhaust manifolds and gaskets. Old manifold studs and nuts often come off with half the rust attached, so use new fixings and a new gasket, or the joint will be blowing again within weeks.

In the fuel system, a repair set for the feed pump helps when the engine is slow to fire or needs lengthy bleeding after standing. A lockable tank cap with a vent is also available.

For the electrics there are starter motors and alternators. A sluggish starter is not always at fault itself, so check the battery terminals and the earth connection first.

Working out what you need

On a tractor of this age, something has usually been replaced along the way. That makes it worth laying the old part next to the new one. A number stamped into or printed on the part is the quickest point of comparison. The tractor type plate gives the model and chassis number, which help when you are choosing between two versions of a clutch plate or starter.

These Deutz tractors from the same 07 series have their own pages too:

Useful when there is more than one classic in the yard. Newer and other models are under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart