Menu
EUR

Deutz D 7007 tractor parts & technical data

If the lights on your Deutz D 7007 have failed or the electrics are playing up, this page lists more than 200 parts that fit this 07 series tractor.

213 parts found for Deutz-Fahr D 7007
Show:
HELLA Alternator 14 V, 33 A Case IH, Deutz-Fahr, John Deere
20%
HELLA
Alternator 14 V, 33 A Case IH, Deutz-Fahr, John Deere
Nominal values (V / A): 14 / 33 | Charging current (A): 33 | Nominal voltage (V)...
€340,12 €281,09 €273,40 €225,95
 
Track rod telescopic axle, hydraulic steering A 1230 - 1740 mm
5%
Track rod telescopic axle, hydraulic steering A 1230 - 1740 mm
A: 1230 - 1740 mm. C: 20 - 22 mm. G: .
€710,32 €587,04 €674,80 €557,69
 
LUK Pilot bearing 20 x 52 x 15 mm
5%
LUK
Pilot bearing 20 x 52 x 15 mm
Dimensions: 20 x 52 x 15 mm.
€34,18 €28,25 €32,45 €26,82
 
Knott Industrietechnik Brake shoe 254 x 70 mm Deutz-Fahr, Case IH
5%
Knott Industrietechnik
Brake shoe 254 x 70 mm Deutz-Fahr, Case IH
€341,46 €282,20 €324,35 €268,06
 
GRANIT Return spring for brake shoe Deutz-Fahr
GRANIT
Return spring for brake shoe Deutz-Fahr
€33,70 €27,85
 
Brake drum inner-Ø 250 mm, old version, with circlip Deutz-Fahr
5%
Brake drum inner-Ø 250 mm, old version, with circlip Deutz-Fahr
Menke no.: 68282.
€194,81 €161,00 €185,00 €152,89
 
PTO shaft end piece 265 mm, 1 3/8 inch 6 splines, 540 rpm
5%
PTO shaft end piece 265 mm, 1 3/8 inch 6 splines, 540 rpm
Version: Length 265 mm, 1 3/8", 6 splines, for 540 rpm.
€630,10 €520,74 €598,55 €494,67
 
GRANIT Starter ring gear Ø 393/364 mm, 129 teeth Deutz
5%
GRANIT
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
Version: Ø 393/364 mm, 129 teeth.
€79,53 €65,73 €75,55 €62,44
 
GRANIT Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
GRANIT
Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
Thread: M22 x 1.5.
€14,30 €11,82
 
GRANIT Connecting rod Ø 35 / 64 mm, length 216 mm, round Fendt, Deutz-Fahr
5%
GRANIT
Connecting rod Ø 35 / 64 mm, length 216 mm, round Fendt, Deutz-Fahr
Dimensions: Ø 35 / 64, Length 216, Round mm.
€161,22 €133,24 €153,15 €126,57
 
Oil dipstick engine Deutz-Fahr
5%
Oil dipstick engine Deutz-Fahr
€77,67 €64,19 €73,75 €60,95
 
O-ring oil pump 14,5 x 3 mm Fendt, Renault, Deutz-Fahr
O-ring oil pump 14,5 x 3 mm Fendt, Renault, Deutz-Fahr
Dimensions: 14.5 x 3 mm.
€7,90 €6,53
 
Exhaust manifold bottom hexagonal exhaust, 4 cylinder Deutz-Fahr
Exhaust manifold bottom hexagonal exhaust, 4 cylinder Deutz-Fahr
Version: downwards exhaust, 4-cylinder.
€1.150,50 €950,83
 
GRANIT Connecting rod bush Ø 35 mm Fendt, Deutz-Fahr
GRANIT
Connecting rod bush Ø 35 mm Fendt, Deutz-Fahr
Dimensions: Ø 35 mm.
€8,90 €7,36
 
GRANIT Valve guide inlet and outlet Fendt, Deutz-Fahr
GRANIT
Valve guide inlet and outlet Fendt, Deutz-Fahr
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€7,75 €6,41
 
GRANIT Cylinder head bolt 210 mm engine Deutz FL912, FL913
GRANIT
Cylinder head bolt 210 mm engine Deutz FL912, FL913
Engine types: FL912, FL913. Dimensions: Length: 210 mm. Menke no.: 68008.
€23,40 €19,34
 
Outlet valve new version 3-rings Deutz engine F2L912-BF6L913
Outlet valve new version 3-rings Deutz engine F2L912-BF6L913
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€33,00 €27,27
 
GRANIT Double hydraulic pump 16 + 11 cm³/rpm., taper 1:5 Ø 17 x 17
5%
GRANIT
Double hydraulic pump 16 + 11 cm³/rpm., taper 1:5 Ø 17 x 17
Output volume: 16 + 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Bosch no.: 051...
€658,07 €543,86 €625,15 €516,65
 
Bosch/Rexroth Double pump anticlockwise 16 + 11 cm³/rpm. Fendt, Steyr, Deutz-Fahr
5%
Bosch/Rexroth
Double pump anticlockwise 16 + 11 cm³/rpm. Fendt, Steyr, Deutz-Fahr
Output volume: 16 + 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pres...
€1.099,20 €908,43 €1.044,20 €862,98
 
GRANIT Leaf spring linkage reinforced Deutz-Fahr
5%
GRANIT
Leaf spring linkage reinforced Deutz-Fahr
€306,13 €253,00 €290,80 €240,33
 
Bush right lift arm 74 x 80 x 85 mm Deutz-Fahr
5%
Bush right lift arm 74 x 80 x 85 mm Deutz-Fahr
Dimensions: 74 x 80 x 85 mm.
€171,94 €142,10 €163,30 €134,96
 
Sealing ring piston 70 x 89 x 12 mm Deutz-Fahr
5%
Sealing ring piston 70 x 89 x 12 mm Deutz-Fahr
Dimensions: 70 x 89 x 12 mm.
€39,26 €32,45 €37,25 €30,79
 
Showing 121 - 144 of 213

Deutz D 7007 parts for a classic that still works for a living

On plenty of farms a D 7007 from the 07 series still pulls the trailer or the muck spreader. To keep it that way there are more than 200 parts for this model, from GRANIT, LUK, HELLA, Bosch/Rexroth and VICTOR REINZ.

Brakes, steering and clutch

For the brakes you will find brake shoes and the matching return springs. Always fit new springs with new shoes. A spring that has been heat cycled for years loses tension and lets the shoe drag lightly on the drum, which shows up as a warm drum after a run on the road.

On the steering side there are ball joints and a bolt set for the steering valve. If the steering has play, have someone rock the wheel back and forth while you feel each joint by hand. That quickly tells you which one is worn. Use a fresh split pin every time you refit a joint.

For the clutch there are clutch plates and thrust bearings, including a sealed release bearing for the main clutch.

Engine and fuel system

Around the Deutz engine there are crankshaft seals, sealing rings and shims. On the exhaust side you will find exhaust manifolds and gaskets. Old manifold studs and nuts often come off with half the rust attached, so use new fixings and a new gasket, or the joint will be blowing again within weeks.

In the fuel system, a repair set for the feed pump helps when the engine is slow to fire or needs lengthy bleeding after standing. A lockable tank cap with a vent is also available.

For the electrics there are starter motors and alternators. A sluggish starter is not always at fault itself, so check the battery terminals and the earth connection first.

Working out what you need

On a tractor of this age, something has usually been replaced along the way. That makes it worth laying the old part next to the new one. A number stamped into or printed on the part is the quickest point of comparison. The tractor type plate gives the model and chassis number, which help when you are choosing between two versions of a clutch plate or starter.

These Deutz tractors from the same 07 series have their own pages too:

Useful when there is more than one classic in the yard. Newer and other models are under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart