Menu
EUR

Deutz D 7007 tractor parts & technical data

If the lights on your Deutz D 7007 have failed or the electrics are playing up, this page lists more than 200 parts that fit this 07 series tractor.

213 parts found for Deutz-Fahr D 7007
Show:
Single pump 16,8 cm³/rpm., taper 1:5, Ø 17 x 17, left
5%
Single pump 16,8 cm³/rpm., taper 1:5, Ø 17 x 17, left
Output volume: 16,8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. A: 45 mm. B: 107,...
€223,04 €184,33 €211,85 €175,08
 
Bush left lift arm 71 x 80 x 85 mm Deutz-Fahr
5%
Bush left lift arm 71 x 80 x 85 mm Deutz-Fahr
Dimensions: 71 x 80 x 85 mm.
€141,09 €116,60 €134,00 €110,74
 
Sealing ring piston 88 x 3 mm Deutz-Fahr
Sealing ring piston 88 x 3 mm Deutz-Fahr
Dimensions: 88 x 3 mm.
€34,60 €28,60
 
Sealing ring piston 84 x 3 mm Deutz-Fahr
Sealing ring piston 84 x 3 mm Deutz-Fahr
Dimensions: 84 x 3 mm.
€16,70 €13,80
 
Clevis for lifting arm length 235 mm, eye-Ø 19 mm, thread M27 x 3 Deutz
5%
Clevis for lifting arm length 235 mm, eye-Ø 19 mm, thread M27 x 3 Deutz
Dimensions: Length = 235, Eye Ø = 19, Thread = M27 x 3 mm.
€336,74 €278,30 €319,90 €264,38
 
GRANIT Pin 20 x 105 mm Deutz-Fahr
5%
GRANIT
Pin 20 x 105 mm Deutz-Fahr
Dimensions: 20 x 105 mm.
€53,42 €44,15 €50,70 €41,90
 
GRANIT Adaptor for
5%
GRANIT
Adaptor for
€67,03 €55,40 €63,65 €52,60
 
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
10%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 4...
€48,98 €40,48 €44,30 €36,61
 
GRANIT Return spring for brake shoe hand brake Deutz D 6806, D 7206, D 6807 - D 7807
GRANIT
Return spring for brake shoe hand brake Deutz D 6806, D 7206, D 6807 - D 7807
To fit as: Deutz D 6806, D 7206, D 6807, D 7007, D 7207, D 7807
€21,00 €17,36
 
SACHS Thrust bearing 55 x 91 x 22 mm Deutz-Fahr D 6006-D 7807, DX 80-DX 120
5%
SACHS
Thrust bearing 55 x 91 x 22 mm Deutz-Fahr D 6006-D 7807, DX 80-DX 120
Dimensions (mm): 55 x 91 x 22
€206,70 €170,83 €196,35 €162,27
 
LUK Thrust bearing PTO clutch 75 x 115 x 20 mm
5%
LUK
Thrust bearing PTO clutch 75 x 115 x 20 mm
Dimensions (mm): 75 x 115 x 20
€175,89 €145,36 €167,00 €138,02
 
LUK Thrust bearing PTO shaft 70 x 110 x 20 mm
5%
LUK
Thrust bearing PTO shaft 70 x 110 x 20 mm
Dimensions (mm): 70 x 110 x 20
€120,88 €99,90 €114,80 €94,88
 
GRANIT Ball joint 101 mm, taper 16,2 - 18,3 mm, M14 x 1,5, M20 x 1,5
5%
GRANIT
Ball joint 101 mm, taper 16,2 - 18,3 mm, M14 x 1,5, M20 x 1,5
A: 101 mm. C: M14 x 1,5 mm. D: M20 x 1,5 mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2...
€37,68 €31,14 €35,75 €29,55
 
GRANIT Repair set brake cylinder without piston Deutz AgroStar 4.61-6.61
5%
GRANIT
Repair set brake cylinder without piston Deutz AgroStar 4.61-6.61
Additional information: Without piston.
€46,27 €38,24 €43,95 €36,32
 
GRANIT Spring clip for brake shoe hand brake Deutz-Fahr
5%
GRANIT
Spring clip for brake shoe hand brake Deutz-Fahr
€53,54 €44,25 €50,85 €42,02
 
GRANIT Seal PTO shaft end piece Deutz-Fahr
GRANIT
Seal PTO shaft end piece Deutz-Fahr
€7,50 €6,20
 
KS Connecting rod bearing Ø 60 mm, width 25 mm Fendt, Deutz-Fahr
KS
Connecting rod bearing Ø 60 mm, width 25 mm Fendt, Deutz-Fahr
Dimensions: Ø 60 mm, Width 25 mm.
€25,40 €20,99
 
Cooling fan Ø 230 mm, pulley Ø 96 mm, built-in Ø 235 mm Deutz-Fahr
5%
Cooling fan Ø 230 mm, pulley Ø 96 mm, built-in Ø 235 mm Deutz-Fahr
Dimensions: Installation Ø 235, Vane Ø 230, Pulley Ø 96 mm mm.
€1.303,47 €1.077,25 €1.238,25 €1.023,35
 
GRANIT Oil cooler Fendt GT 380, Deutz-Fahr D 6806 - D 7207
5%
GRANIT
Oil cooler Fendt GT 380, Deutz-Fahr D 6806 - D 7207
€250,29 €206,85 €237,75 €196,49
 
GRANIT Piston ring set 4 rings, Ø 100 mm, 2,5/2,5/2,5/5 mm Deutz-Fahr
5%
GRANIT
Piston ring set 4 rings, Ø 100 mm, 2,5/2,5/2,5/5 mm Deutz-Fahr
Dimensions: 4 rings, Ø 100 mm, 2.5 mm (trapezoidal ring), 2.5 mm, 2.5 mm, 5 mm.
€105,39 €87,10 €100,10 €82,73
 
Brass nut exhaust manifold M8, height 10 mm Deutz-Fahr
Brass nut exhaust manifold M8, height 10 mm Deutz-Fahr
Version: Thread M8, Height: 10 mm. Thread: M8.
€7,55 €6,24
 
Crankshaft 4-cylinder standard Without central gear wheel Deutz
5%
Crankshaft 4-cylinder standard Without central gear wheel Deutz
Notes: Please follow the installation instructions. Then fill in the test report...
€810,06 €669,47 €769,55 €635,99
 
GRANIT Oil pump thread 28 x 1,5 mm Fendt, Renault, Deutz-Fahr
5%
GRANIT
Oil pump thread 28 x 1,5 mm Fendt, Renault, Deutz-Fahr
Dimensions: Thread 28 x 1.5 mm.
€111,61 €92,24 €106,00 €87,60
 
Showing 169 - 192 of 213

Deutz D 7007 parts for a classic that still works for a living

On plenty of farms a D 7007 from the 07 series still pulls the trailer or the muck spreader. To keep it that way there are more than 200 parts for this model, from GRANIT, LUK, HELLA, Bosch/Rexroth and VICTOR REINZ.

Brakes, steering and clutch

For the brakes you will find brake shoes and the matching return springs. Always fit new springs with new shoes. A spring that has been heat cycled for years loses tension and lets the shoe drag lightly on the drum, which shows up as a warm drum after a run on the road.

On the steering side there are ball joints and a bolt set for the steering valve. If the steering has play, have someone rock the wheel back and forth while you feel each joint by hand. That quickly tells you which one is worn. Use a fresh split pin every time you refit a joint.

For the clutch there are clutch plates and thrust bearings, including a sealed release bearing for the main clutch.

Engine and fuel system

Around the Deutz engine there are crankshaft seals, sealing rings and shims. On the exhaust side you will find exhaust manifolds and gaskets. Old manifold studs and nuts often come off with half the rust attached, so use new fixings and a new gasket, or the joint will be blowing again within weeks.

In the fuel system, a repair set for the feed pump helps when the engine is slow to fire or needs lengthy bleeding after standing. A lockable tank cap with a vent is also available.

For the electrics there are starter motors and alternators. A sluggish starter is not always at fault itself, so check the battery terminals and the earth connection first.

Working out what you need

On a tractor of this age, something has usually been replaced along the way. That makes it worth laying the old part next to the new one. A number stamped into or printed on the part is the quickest point of comparison. The tractor type plate gives the model and chassis number, which help when you are choosing between two versions of a clutch plate or starter.

These Deutz tractors from the same 07 series have their own pages too:

Useful when there is more than one classic in the yard. Newer and other models are under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart