Menu
EUR

Valtra 505 tractor parts & technical data

Whether yours says Valtra 505 or Valmet 505, this page lists more than 60 matching parts for the electrics, steering and front axle, and the engine.

68 parts found for Valtra-Valmet 505
Show:
Wheel brake cylinder K1, DOT 4 Valtra-Valmet Mezzo 6000-6900
€183,75 €151,86 €169,05 €139,71
You save 8%
Brake disc Ø 224 mm, 27 teeth, thickness 5 mm, 50 km/h, for ceramic
Notes: Please check the rear axle version and take this into account when ordering.. More
Notes: Please check the rear axle version and take this into account w...
€40,13 €33,16
Water pump with seal Valtra-Valmet 505-815
€263,60 €217,85 €242,51 €200,42
You save 8%
Radiator hose, bottom inner-Ø 40 / 41 mm Valtra-Valmet
Inner Ø: 40 / 41 mm. More
Inner Ø: 40 / 41 mm.
€56,02 €46,30 €51,54 €42,59
You save 8%
Crankshaft seal for Ø 58 x 80 x 12 mm Massey Ferguson
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm. More
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm.
€15,49 €12,80
Stop cable 2250 / 2015 mm Valtra-Valmet 205-8600
A: 2250 mm. B: 2015 mm. More
A: 2250 mm. B: 2015 mm.
€34,18 €28,24
Start switch 12 V, Ø 26 mm - 1 key
Version: 12 V, with blade terminal, 0: off, 1: consumer, 2: preheat, 3: start, Mounting Ø 26 mm. More
Version: 12 V, with blade terminal, 0: off, 1: consumer, 2: preheat, 3...
€252,17 €208,41 €232,00 €191,73
You save 8%
Steering column switch indicator, main beam, horn, interval
Version: Functions: indicators, horn, dipped beam/full beam changeover, headlight flasher, wiper/washer intervals. Connection cable with 2 plugs. More
Version: Functions: indicators, horn, dipped beam/full beam changeover...
€250,30 €206,86
Starter ring gear Ø 405/373 mm, 133 teeth Valtra-Valmet
Version: Ø 405/373 mm, 133 teeth. More
Version: Ø 405/373 mm, 133 teeth.
€224,52 €185,55 €206,56 €170,71
You save 8%
Radiator filler cap grommet-Ø 57 mm, height 25 mm
Neck Ø: 57 mm. Height: 25 mm. More
Neck Ø: 57 mm. Height: 25 mm.
€25,20 €20,83
Main headlight insert left and right H4 12V 55W, T4W without marker light
Bulb: 12V55W / H4, 12V4WK / T4W. Nominal voltage: 12 V. Light function: with high beam, with low beam, without position light. More
Bulb: 12V55W / H4, 12V4WK / T4W. Nominal voltage: 12 V. Light function...
€63,07 €52,12 €58,02 €47,95
You save 8%
Repair set brake cylinder DOT4 with piston Valtra-Valmet, Steyr
Medium: DOT4. Additional information: With piston. More
Medium: DOT4. Additional information: With piston.
€61,12 €50,51 €56,23 €46,47
You save 8%
Toggle switch lighting black lever, 4 blade connections
Version: For lighting, 4 blade terminals 6.3 mm. More
Version: For lighting, 4 blade terminals 6.3 mm.
€32,44 €26,81
Showing 49 - 68 of 68

Valtra 505 parts to keep an old Valmet working

The Valtra 505, still known to many owners as the Valmet 505, is the kind of tractor you can work on yourself, and with the right parts it keeps earning its place in the yard. This page lists more than 60 replacement parts for it, from GRANIT, MAHLE, Cobo, HELLA and LUK.

Brakes and steering

Steering ball joints wear on any older tractor, and play in the linkage shows up straight away on the road. For the brakes there are wheel brake cylinders and repair kits for the brake cylinder. A repair kit is worth fitting while the bore is still smooth. If you see rust or scoring, go for a new cylinder instead. Bleed the brakes carefully afterwards, starting with the wheel furthest from the master cylinder.

Engine and fuel

On the engine side you will find oil sump gaskets, crankshaft seals, coolant seals and radiator hoses. When replacing a crankshaft seal, take care not to mark the running surface while removing the old one, and lightly grease the lip of the new seal before fitting. The feed pump supplies diesel to the injection pump. After changing it, bleed the fuel system or the engine will not fire. A stop cable is listed too, for when the old one has become stiff.

Starting, charging and lights

Starter motors, alternators, connection cables, a flasher unit and a headlight keep the electrics in order. If the indicators suddenly flash twice as fast, a blown bulb is the usual cause rather than the flasher unit. For the clutch there are clutch plates, including ones from LUK.

On a tractor of this age the clutch plate has often been replaced before. If it is due again, inspect the flywheel for scoring and heat marks and check the pressure plate and release bearing at the same time. A new plate on a damaged flywheel will soon slip again. Centre the plate with an alignment tool when fitting it, so the input shaft slides in without force when the tractor goes back together, and give the splines the thinnest smear of grease.

Valmet or Valtra, and the sister models

The type plate tells you which name the tractor left the factory with and exactly which model it is. With the old part in your hand, compare the reference number on it with the product description. On older machines something has often been replaced before, and then that number is more reliable than the model alone.

The 505 belongs to the same line as the Valtra 605, Valtra 705 and Valtra 805, each with a page of its own. For the rest of the Valtra and Valmet line up, head to Valtra parts.

Brands
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart