Menu
EUR

Valtra A 85 tractor parts & technical data

Trailer couplings, electrics and lighting for the Valtra A 85 come together here. With more than 100 parts for the A series you can search by your model.

104 parts found for Valtra-Valmet A 85
Show:
Installation cable mini-contact plug 1 m
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510. More
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510.
€171,07 €141,38 €157,38 €130,07
You save 8%
Wabco Solenoid valve 3/2-way, 12 V, 1,41 A, M16 x 1,5, standard closed
Wabco
Eligible: Environmental protection and safety (formerly de minimis) More
Eligible: Environmental protection and safety (formerly de minimis)
€408,59 €337,68 €375,90 €310,66
You save 8%
Knorr Bremse Antifreeze pump air pressure- / brake system, 684 g
€280,12 €231,50 €257,71 €212,98
You save 8%
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.104,81 €913,07 €873,47 €721,88
You save 21%
DANA Spicer Plug front axle 745
€20,26 €16,75
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€630,05 €520,70 €579,65 €479,05
You save 8%
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: consumer, 2: start, Installation dimension: Ø 16.5 mm, Without preheat... More
Version: 12 V, with 4 blade terminal connections, Switch positions: 0:...
€16,13 €13,33
Scharmüller Drawbar frame standard 97,1 kN, 330 mm, ball 80
Scharmüller
Colour: Black | Rail width (mm): 330 | Category: Bearing supports | D-value (kN): 97,1 | Lock: ball 80 | Load capacity (kg): 3000 | Description: Daiml... More
Colour: Black | Rail width (mm): 330 | Category: Bearing supports | D-...
€3.397,30 €2.807,69 €3.175,52 €2.624,40
You save 7%
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Walterscheid
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg, from 40 km/h 2,000 kg. More
Quick height adjustment with rotation lock, load capacity up to 40 km/...
€2.111,26 €1.744,84 €1.719,18 €1.420,81
You save 19%
DANA Spicer Wheel bolt M18 x 1,5, 60 mm final drive front axle 730
DANA Spicer
Length (mm): 60 | Thread: M18 X 1,5 More
Length (mm): 60 | Thread: M18 X 1,5
€16,23 €13,41
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: 12 V: 5-12 A, 24 V: 3-8 A, protection class: IP67, NC = normally close... More
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, powe...
€32,65 €26,98 €30,04 €24,82
You save 8%
Wiper motor Massey Ferguson, Valtra-Valmet
€223,30 €184,55 €205,44 €169,78
You save 8%
Filter dryer Ø 76 mm, 228 mm, connection thread M
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O-ring B = male thread 3/8"" - 18UNF Pressure switch thread: 1 3/8"" - 24 O-ring ... More
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O...
€63,79 €52,72 €58,69 €48,50
You save 8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Connection thread E: - More
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O...
€54,07 €44,69 €49,74 €41,11
You save 8%
DANA Spicer O-ring differential front axle 745, 2 g
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Cobo
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning light function. More
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard w...
€58,12 €48,03 €53,47 €44,19
You save 8%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.207,08 €997,59 €954,33 €788,70
You save 21%
Scharmüller Drawbar frame standard 76,4 kN, 330 mm, type 427, axle tube Ø 120 mm
Scharmüller
Category: Bearing supports | Colour: Black | Description: compatible with Q37 Daimler end cross member or Scharmüller item 34.437.001.0 Suitable for ... More
Category: Bearing supports | Colour: Black | Description: compatible w...
€5.236,22 €4.327,45 €4.867,32 €4.022,58
You save 7%
GRAMMER Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
GRAMMER
Super comfort seat with low-frequency air suspension and 12V compressor. APS: automatic positioning system. Armrests height adjustable and folding. Ad... More
Super comfort seat with low-frequency air suspension and 12V compresso...
€1.991,23 €1.645,64
Scharmüller Drawbar frame rail 330 mm, guide 32 mm, 112 kN, 1000 kg
Scharmüller
Version: Lang | Rail width (mm): 330 | Category: Lagerböcke | Colour: Schwarz | Guide width (mm): 32 | D-value (kN): 112 | Dc-value (kN): 106 | V-val... More
Version: Lang | Rail width (mm): 330 | Category: Lagerböcke | Colour:...
€1.336,47 €1.104,52 €1.279,55 €1.057,48
You save 4%
Scharmüller Drawbar frame standard 89,3 kN, 330 mm, type 437
Scharmüller
D-value (kN): 89,3 | Rail width (mm): 330 | Load capacity (kg): 2500 | Version: Standard | Colour: Black | Guide width (mm): 32 | Type: 437 | Category... More
D-value (kN): 89,3 | Rail width (mm): 330 | Load capacity (kg): 2500 |...
€2.322,25 €1.919,21 €2.186,47 €1.807,00
You save 6%
MAHLE Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
MAHLE
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø (mm): - | Additional information: Compact alternator, dust-tight | Mounting L /... More
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø...
€388,90 €321,41 €232,93 €192,50
You save 40%
Turbocharger Case IH CS 78-110, Steyr, Valtra-Valmet
€1.328,18 €1.097,67 €1.272,81 €1.051,91
You save 4%
Scharmüller Drawbar frame standard 76,4 kN, 330 mm, type 427, axle tube Ø 125 mm
Scharmüller
Description: compatible with Q37 Daimler end cross member or Scharmüller item 34.437.001.0 Suitable for two-piece axle with axle tube Ø125 mm - axle... More
Description: compatible with Q37 Daimler end cross member or Scharmül...
€5.236,22 €4.327,45 €4.867,32 €4.022,58
You save 7%
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
SANDEN
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connection: A2 | Nominal voltage (V): 12 | Pulley Ø (mm): 132 | Menke no.: 67... More
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a ...
€586,48 €484,69 €539,56 €445,92
You save 8%
Thrust bearing 1,76 kg Massey Ferguson 4435 - 4455, Valtra-Valmet
€176,26 €145,67 €162,16 €134,02
You save 8%
MAHLE Alternator 14 V, 65 A, pulley-Ø 80 mm, form A
MAHLE
Pulley Ø (mm): 80.0 | Charging current (A): 65 | Form: A | Pulley spacing (mm): 37,0 | Nominal values (V / A): 14 / 65 | Mounting L / d / R (mm): 82,... More
Pulley Ø (mm): 80.0 | Charging current (A): 65 | Form: A | Pulley spa...
€234,35 €193,68 €140,36 €116,00
You save 40%
Reman turbocharger Valtra-Valmet, Steyr, Case IH
€1.024,99 €847,10 €982,26 €811,79
You save 4%
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 210 ccm
No. of grooves: 2 | Nominal voltage (V): 12 | Connection: 7/8"" x 3/4"", vertical | Oil quantity (ccm): 210 | Suitable oil: PAG 46 | Fixing: EM | Pull... More
No. of grooves: 2 | Nominal voltage (V): 12 | Connection: 7/8"" x 3/4"...
€426,97 €352,87 €392,81 €324,64
You save 8%
AKS-Dasis Filter dryer airco 203 mm, Ø 63 mm, O-ring, M Valtra-Valmet
AKS-Dasis
Connection thread A: 11 | Connection thread: M | Connection: O-ring A = male thread 5/8"" 18UNF B = male thread 5/8"" - 18UNF Switch: female thread 3/... More
Connection thread A: 11 | Connection thread: M | Connection: O-ring A ...
€87,58 €72,38 €80,57 €66,59
You save 8%
Alternator 14 V / 95 A, flange 56 mm Valtra-Valmet
Belt tension hole Ø / R (mm): 8,2 / 86,0 | Nominal voltage (V): 14 | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Charging current (A): 95 | Nominal ... More
Belt tension hole Ø / R (mm): 8,2 / 86,0 | Nominal voltage (V): 14 | ...
€263,03 €217,38 €241,99 €199,99
You save 8%
Alternator 14 V / 65 A, pulley-Ø 80 mm, flange 82 mm Valtra-Valmet
Form: A | Installation angle (°): l 60 | Mounting hole Ø / R (mm): 8,2 / 86,0 | Flange size (mm): 82,0 | Mounting L / d / R (mm): 82,0 / 8,2 / 86,0 ... More
Form: A | Installation angle (°): l 60 | Mounting hole Ø / R (mm): 8...
€237,43 €196,22 €218,44 €180,53
You save 8%
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
DANA Spicer
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120 More
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€46,81 €38,69 €43,07 €35,59
You save 8%
DANA Spicer Intermediate bush as front axle 745, 120 x 127 x 40 mm
DANA Spicer
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40 | Outer Ø (mm): 127 More
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40...
€140,42 €116,05 €129,19 €106,77
You save 8%
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 254 mm, clockwise
€510,93 €422,26 €306,01 €252,90
You save 40%
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Colour: Black. Description: This product is a b... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.152,79 €1.779,17 €1.702,02 €1.406,63
You save 21%
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€77,66 €64,18 €71,45 €59,05
You save 8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 475, 484, 584, 674, 684, 784, 884 385, 485, 485XL, 585, 585XL, 685, 685... More
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 4...
€48,67 €40,22 €44,78 €37,01
You save 8%
Aircon compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil
Reference no.: QP7H15-8024 | Suitable oil: PAG 46 | For compressor: 7H15 | Nominal voltage (V): 12 | Pulley Ø (mm): 132 | Fixing: EM | Oil quantity (... More
Reference no.: QP7H15-8024 | Suitable oil: PAG 46 | For compressor: 7H...
€357,93 €295,81 €329,30 €272,15
You save 8%
DANA Spicer Sealing ring final drive front axle 755, 40 x 65 x 18 mm
DANA Spicer
Dimensions (mm): 40 x 65 x 18 More
Dimensions (mm): 40 x 65 x 18
€33,83 €27,96 €31,12 €25,72
You save 8%
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF. More
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€33,85 €27,98
Rail pressure valve Massey Ferguson, Valtra-Valmet, Fendt
€69,94 €57,80 €64,34 €53,18
You save 8%
Showing 1 - 48 of 104

Valtra A 85 parts

With a turbocharged engine, air conditioning and a fair amount of cab electrics, the Valtra A 85 has plenty that can wear. More than 100 parts are listed for it here. Rather than going item by item, this page walks round the tractor.

Engine bay

Under the hood there are remanufactured turbochargers, water pumps and valve cover gaskets, plus seals for the exhaust manifold at the turbo. In the fuel system you will find the O-ring for the feed pump. The alternator is made for Valtra-Valmet, as is the aircon compressor with its twin groove pulley.

Whenever you replace the turbo, fit a new manifold seal with it. Inspect the oil feed and return lines as well, because a blocked or kinked line is often what killed the old unit. Prime the new turbo with clean engine oil through the feed port before the first start, and let the engine idle for the first minute.

Cab, lighting and steering

Inside the cab there are door locks, GRAMMER tractor seats and a flasher unit with holder. Outside you will find work lamps, including a flood beam, and rectangular indicator and position lights. Ball joints for the steering come from DANA Spicer among others.

Hitching up

Drawbar frames and ball type drawbars from Scharmüller and Walterscheid handle the towing side. With a frame, rail width is what counts, as it has to match the guide on your tractor.

Aircon compressor and water pump

Replacing an aircon compressor follows a set order. Have the system recovered by a qualified workshop first, fit a new receiver drier along with the compressor, and flush the lines if the old one failed internally. Metal debris left in the circuit will quickly ruin the new compressor. Check the compressor oil quantity before the system is recharged.

A water pump announces its end with coolant at the weep hole under the shaft or a whining bearing. Fit a new gasket with it, refill with fresh coolant and bleed the system thoroughly.

Confirming the fit

Check the type plate to be sure you have an A 85. On a turbocharger, aircon compressor or alternator, the part number is usually on a tag or cast into the housing. Compare it with the details of the item and you will know it fits.

The A 85 is one of the Valtra A series. These sister models have their own pages:

Every Valtra and Valmet model is grouped under Valtra onderdelen.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart