Menu
EUR

Valtra N 113 tractor parts & technical data

Got a Valtra N 113 from the N3 series in the yard? Find more than 100 parts here, such as trailer couplings, electrics, and steering and front axle parts.

110 parts found for Valtra-Valmet N 113
Show:
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 x 80 mm. Guide width: 30 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pat...
€638,19 €527,43
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.104,81 €913,07 €873,47 €721,88
You save 21%
DANA Spicer Plug front axle 745
€20,26 €16,75
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Scharmüller
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000 | Colour: AGCO grey | Guide width (mm): 30 | Rail width (mm): 335 | ... More
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€630,05 €520,70 €579,65 €479,05
You save 8%
NOX sensor Massey Ferguson, Valtra-Valmet, Fendt
To fit: Massey Ferguson, Valtra-Valmet, Fendt. More
To fit: Massey Ferguson, Valtra-Valmet, Fendt.
€453,61 €374,88 €417,32 €344,89
You save 8%
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: consumer, 2: start, Installation dimension: Ø 16.5 mm, Without preheat... More
Version: 12 V, with 4 blade terminal connections, Switch positions: 0:...
€16,13 €13,33
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Walterscheid
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg, from 40 km/h 2,000 kg. More
Quick height adjustment with rotation lock, load capacity up to 40 km/...
€2.111,26 €1.744,84 €1.719,18 €1.420,81
You save 19%
Gear wheel main shaft 31 teeth Valtra-Valmet
Number of teeth: 31. More
Number of teeth: 31.
€423,24 €349,79 €389,38 €321,80
You save 8%
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: 12 V: 5-12 A, 24 V: 3-8 A, protection class: IP67, NC = normally close... More
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, powe...
€32,65 €26,98 €30,04 €24,82
You save 8%
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
Scharmüller
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version: Standard | Colour: AGCO grey | Load capacity (t): 3 | Length (mm): 4... More
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual...
€987,09 €815,78 €908,12 €750,51
You save 8%
Wiper motor Massey Ferguson, Valtra-Valmet
€223,30 €184,55 €205,44 €169,78
You save 8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Connection thread E: - More
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O...
€54,07 €44,69 €49,74 €41,11
You save 8%
Gear wheel planetary set rear axle 82 teeth Valtra-Valmet
€894,96 €739,64 €823,36 €680,47
You save 8%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.207,08 €997,59 €954,33 €788,70
You save 21%
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€583,34 €482,10 €536,67 €443,53
You save 8%
SANDEN Aircon compressor 12 V, Ø 119 mm, 6 grooves Valtra-Valmet
SANDEN
Fixing: DM | Refrigerant: R 134a | No. of grooves: 6 | Nominal voltage (V): 12 | Oil quantity (ccm): 190 | Suitable oil: SP 10 | Pulley Ø (mm): 119 More
Fixing: DM | Refrigerant: R 134a | No. of grooves: 6 | Nominal voltage...
€646,52 €534,31 €594,80 €491,57
You save 8%
Cooling fan Ø 600 mm Massey Ferguson, Valtra - Valmet
Ø: 600 mm. To fit: Massey Ferguson, Valtra - Valmet. More
Ø: 600 mm. To fit: Massey Ferguson, Valtra - Valmet.
€185,59 €153,38 €170,74 €141,11
You save 8%
Gas strut door 250 N, 345 mm, stroke 126 mm Massey Ferguson 4745ZN
suitable for: Tür. Newtons: 250. A: 345 mm. B: 175 mm. C: 8 mm. D: 8 mm. Form: 2. d1: 8 mm. d2: 18 mm. Stroke: 126 mm. Menke no.: 202912. More
suitable for: Tür. Newtons: 250. A: 345 mm. B: 175 mm. C: 8 mm. D: 8 ...
€34,26 €28,31 €31,52 €26,05
You save 8%
Alternator 12 V / 65 A Challenger, JCB, Massey Ferguson, Valtra-Valmet
Installation angle (°): l 60 | Charging current (A): 65 | Additional information: Connections B+ (M6-6.3), with W-connection, internal regulator | Di... More
Installation angle (°): l 60 | Charging current (A): 65 | Additional ...
€256,15 €211,69 €235,66 €194,76
You save 8%
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
€171,21 €141,50 €157,51 €130,18
You save 8%
DANA Spicer Wheel hub final drive front axle 730
€408,30 €337,44
Clutches set 9+9 Valtra-Valmet 6250 - 8950, C90 - XM150
€230,48 €190,48 €212,04 €175,24
You save 8%
SACHS Shock absorber rear, gas pressure MSE27/13X47A2 Valtra-Valmet
SACHS
Dimensions (mm): MSE27/13X47A2 | Installation location: Rear | Design: Gas pressure | To fit: Valtra | System: Twin-tube More
Dimensions (mm): MSE27/13X47A2 | Installation location: Rear | Design:...
€698,55 €577,31 €642,67 €531,13
You save 8%
DANA Spicer Differential bevel gear final drive front axle 730
€244,50 €202,07 €224,94 €185,90
You save 8%
DANA Spicer Guard plate differential front axle 745
DANA Spicer Grooved nut bevel gear differential front axle 730
€82,27 €67,99 €75,69 €62,55
You save 8%
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€548,46 €453,27 €328,50 €271,49
You save 40%
Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
€331,16 €273,69 €304,67 €251,79
You save 8%
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Scharmüller
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail width (mm): 200 | D-value (kN): 10 | Colour: Black | Detent pin Ø (mm): ... More
Version: Standard | Category: Bearing supports | Guide width (mm): 25 ...
€668,46 €552,45 €614,98 €508,25
You save 8%
PTO shaft end piece 1 3/8 inch, 6 splines, 245 mm Valtra-Valmet
Version: 1 3/8"", 6 grooves | Length (mm): 245 More
Version: 1 3/8"", 6 grooves | Length (mm): 245
€415,22 €343,16 €382,00 €315,70
You save 8%
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
CARLISLE
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth More
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€17,19 €14,20
DANA Spicer O-ring as front axle 745, 4 g
€17,60 €14,55
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
DANA Spicer
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120 More
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€46,81 €38,69 €43,07 €35,59
You save 8%
DANA Spicer Intermediate bush as front axle 745, 120 x 127 x 40 mm
DANA Spicer
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40 | Outer Ø (mm): 127 More
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40...
€140,42 €116,05 €129,19 €106,77
You save 8%
Clutch plate set omkeerinrichting Valtra-Valmet
€486,96 €402,45 €448,00 €370,25
You save 8%
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
Scharmüller
suitable for: Valtra. Series: C-Serie. Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Dimensions: shaft height x width: 60 x 80 mm... More
suitable for: Valtra. Series: C-Serie. Category: Pick-up hitch. Versio...
€1.428,29 €1.180,41 €1.314,03 €1.085,97
You save 8%
BOSCH Pressure regulator CP4 Valtra-Valmet, Fendt, Massey Ferguson
€184,72 €152,66 €156,56 €129,39
You save 15%
Injector Fendt 200, Valtra-Valmet N3, T3, Massey Ferguson 5600
€671,72 €555,14 €617,98 €510,73
You save 8%
Fan clutch Valtra N103.4-N163, T132-T202, T133-T203
€726,26 €600,21 €668,16 €552,20
You save 8%
Showing 1 - 48 of 110

Valtra N 113 parts

Once a Valtra N 113 has racked up serious hours, the hitch, the driveline and the cooling system are where the work starts. There are more than 100 replacement parts that fit it, from GRANIT, DANA Spicer, Scharmüller, Walterscheid and BOSCH.

Hitching up

At the rear there are ball type drawbars and separate ball inserts from Scharmüller. A ball hitch wears on the top surface where the trailer eye bears down, so check it regularly and replace the insert before the coupling starts to knock. For the cab there is a door lock, and for working after dark a work lamp.

Driveline

Transmission parts include clutch sets, gear wheels, adapter plates and differential bevel gears, along with a gear reduction starter. Differential bevel gears and planet pinions wear as a group. If one gear shows pitting or chipped teeth, inspect its partners and the thrust washers too.

Cooling and engine

  • thermostats
  • a fan clutch and an electric cooling fan
  • temperature sensors
  • seals, such as the exhaust manifold seal at the turbocharger
  • O-rings, for instance for the oil filler cap

A slipping fan clutch lets the fan lag behind and the engine runs hot under load. Spin the fan by hand while the engine is still cold and it should resist noticeably. If it spins freely or there is oil around the clutch, replace it.

With the electric cooling fan, check the fuse and the plug before anything else. If the fan feels rough when turned by hand or makes noise, its motor is worn and a new fan is the answer. Replacement adapter plates and gear wheels are easiest to match using the number stamped on the old part.

A gear reduction starter that only clicks is not always faulty itself. Check the battery, the earth strap and the solenoid terminal before replacing it, since a poor connection gives the same symptom. If the door lock no longer catches, the lock is usually to blame rather than the door. After fitting a new one, adjust the striker so the door closes without force and does not rattle. A work lamp that keeps failing from vibration needs a firm bracket and a clean earth connection.

Choosing correctly

The serial number is on the type plate of the N 113. When in doubt, go by the number on the old part, on the starter or fan clutch for example, and search the shop with it. The other tractors in the N series each have a separate page:

All Valtra tractors are listed under Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart