Menu
EUR

Valtra T 213 tractor parts & technical data

Maintaining a Valtra T 213 from the T3 series? Choose from more than 120 parts here, with trailer couplings, lighting and electrics at the top of the list.

122 parts found for Valtra-Valmet T 213
Show:
Installation cable mini-contact plug 1 m
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510. More
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510.
€171,07 €141,38 €157,38 €130,07
You save 8%
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 x 80 mm. Guide width: 30 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pat...
€638,19 €527,43
DANA Spicer Gear ring final drive front axle 750/201
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Dipped beam, full beam. Dimensions W x H x D: 16... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€124,12 €102,58 €114,19 €94,37
You save 8%
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.104,81 €913,07 €873,47 €721,88
You save 21%
DANA Spicer Plug front axle 745
€20,26 €16,75
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Scharmüller
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000 | Colour: AGCO grey | Guide width (mm): 30 | Rail width (mm): 335 | ... More
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€630,05 €520,70 €579,65 €479,05
You save 8%
BOSCH Fuel pre-filter line filter D 37 mm, H 105 mm, connection 6 mm
BOSCH
C (mm): 35 | F: 6 | D (mm): 37 | H (mm): 105 | Height (mm): 105 | Version: Leitungsfilter | G (mm): 6 | Additional information: Typformel: F4058 | Ø ... More
C (mm): 35 | F: 6 | D (mm): 37 | H (mm): 105 | Height (mm): 105 | Vers...
€3,99 €3,30
NOX sensor Massey Ferguson, Valtra-Valmet, Fendt
To fit: Massey Ferguson, Valtra-Valmet, Fendt. More
To fit: Massey Ferguson, Valtra-Valmet, Fendt.
€453,61 €374,88 €417,32 €344,89
You save 8%
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: consumer, 2: start, Installation dimension: Ø 16.5 mm, Without preheat... More
Version: 12 V, with 4 blade terminal connections, Switch positions: 0:...
€16,13 €13,33
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Walterscheid
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg, from 40 km/h 2,000 kg. More
Quick height adjustment with rotation lock, load capacity up to 40 km/...
€2.111,26 €1.744,84 €1.719,18 €1.420,81
You save 19%
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: 12 V: 5-12 A, 24 V: 3-8 A, protection class: IP67, NC = normally close... More
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, powe...
€32,65 €26,98 €30,04 €24,82
You save 8%
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
Scharmüller
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version: Standard | Colour: AGCO grey | Load capacity (t): 3 | Length (mm): 4... More
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual...
€987,09 €815,78 €908,12 €750,51
You save 8%
Wiper motor Massey Ferguson, Valtra-Valmet
€223,30 €184,55 €205,44 €169,78
You save 8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Connection thread E: - More
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O...
€54,07 €44,69 €49,74 €41,11
You save 8%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.207,08 €997,59 €954,33 €788,70
You save 21%
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€583,34 €482,10 €536,67 €443,53
You save 8%
SANDEN Aircon compressor 12 V, Ø 119 mm, 6 grooves Valtra-Valmet
SANDEN
Fixing: DM | Refrigerant: R 134a | No. of grooves: 6 | Nominal voltage (V): 12 | Oil quantity (ccm): 190 | Suitable oil: SP 10 | Pulley Ø (mm): 119 More
Fixing: DM | Refrigerant: R 134a | No. of grooves: 6 | Nominal voltage...
€646,52 €534,31 €594,80 €491,57
You save 8%
Cooling fan Ø 600 mm Massey Ferguson, Valtra - Valmet
Ø: 600 mm. To fit: Massey Ferguson, Valtra - Valmet. More
Ø: 600 mm. To fit: Massey Ferguson, Valtra - Valmet.
€185,59 €153,38 €170,74 €141,11
You save 8%
Gas strut door 250 N, 345 mm, stroke 126 mm Massey Ferguson 4745ZN
suitable for: Tür. Newtons: 250. A: 345 mm. B: 175 mm. C: 8 mm. D: 8 mm. Form: 2. d1: 8 mm. d2: 18 mm. Stroke: 126 mm. Menke no.: 202912. More
suitable for: Tür. Newtons: 250. A: 345 mm. B: 175 mm. C: 8 mm. D: 8 ...
€34,26 €28,31 €31,52 €26,05
You save 8%
Alternator 12 V / 65 A Challenger, JCB, Massey Ferguson, Valtra-Valmet
Installation angle (°): l 60 | Charging current (A): 65 | Additional information: Connections B+ (M6-6.3), with W-connection, internal regulator | Di... More
Installation angle (°): l 60 | Charging current (A): 65 | Additional ...
€256,15 €211,69 €235,66 €194,76
You save 8%
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
€171,21 €141,50 €157,51 €130,18
You save 8%
LED main headlight round 126 x 110 x 76 mm, H11, 12/24 V
EMC: CISPR 25 class 3 | Light function: Dipped beam | Theoretical luminous flux (lm): 2380 | Current (A): [email protected] [email protected] | Power (watts): 17 | Vo... More
EMC: CISPR 25 class 3 | Light function: Dipped beam | Theoretical lumi...
€87,50 €72,31 €80,50 €66,53
You save 8%
Clutches set 9+9 Valtra-Valmet 6250 - 8950, C90 - XM150
€230,48 €190,48 €212,04 €175,24
You save 8%
SACHS Shock absorber rear, gas pressure MSE27/13X47A2 Valtra-Valmet
SACHS
Dimensions (mm): MSE27/13X47A2 | Installation location: Rear | Design: Gas pressure | To fit: Valtra | System: Twin-tube More
Dimensions (mm): MSE27/13X47A2 | Installation location: Rear | Design:...
€698,55 €577,31 €642,67 €531,13
You save 8%
DANA Spicer King pin final drive front axle 755
€114,51 €94,64 €105,35 €87,07
You save 8%
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€548,46 €453,27 €328,50 €271,49
You save 40%
Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
€331,16 €273,69 €304,67 €251,79
You save 8%
Master brake cylinder with front axle brakes, mineral oil Valtra-Valmet
€1.214,02 €1.003,32 €1.116,90 €923,06
You save 8%
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Scharmüller
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail width (mm): 200 | D-value (kN): 10 | Colour: Black | Detent pin Ø (mm): ... More
Version: Standard | Category: Bearing supports | Guide width (mm): 25 ...
€668,46 €552,45 €614,98 €508,25
You save 8%
PTO shaft end piece 1 3/8 inch, 6 splines, 245 mm Valtra-Valmet
Version: 1 3/8"", 6 grooves | Length (mm): 245 More
Version: 1 3/8"", 6 grooves | Length (mm): 245
€415,22 €343,16 €382,00 €315,70
You save 8%
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
CARLISLE
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth More
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€17,19 €14,20
DANA Spicer O-ring as front axle 745, 4 g
€17,60 €14,55
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
DANA Spicer
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120 More
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€46,81 €38,69 €43,07 €35,59
You save 8%
DANA Spicer Intermediate bush as front axle 745, 120 x 127 x 40 mm
DANA Spicer
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40 | Outer Ø (mm): 127 More
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40...
€140,42 €116,05 €129,19 €106,77
You save 8%
Clutch plate set omkeerinrichting Valtra-Valmet
€486,96 €402,45 €448,00 €370,25
You save 8%
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
Scharmüller
suitable for: Valtra. Series: C-Serie. Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Dimensions: shaft height x width: 60 x 80 mm... More
suitable for: Valtra. Series: C-Serie. Category: Pick-up hitch. Versio...
€1.428,29 €1.180,41 €1.314,03 €1.085,97
You save 8%
BOSCH Pressure regulator CP4 Valtra-Valmet, Fendt, Massey Ferguson
€184,72 €152,66 €156,56 €129,39
You save 15%
Turbocharger Valtra-Valmet T 133 - T 213, Massey Ferguson 7600, 7700
€2.661,24 €2.199,37 €2.550,30 €2.107,69
You save 4%
Showing 1 - 48 of 122

Valtra T 213 parts with a focus on cooling

When the temperature gauge on a Valtra T 213 starts creeping up, the cause is often a small component. A thermostat that no longer opens, a radiator hose gone soft, a sensor sending the wrong reading. This page holds more than 120 replacement parts for the T 213, from GRANIT, BOSCH, Walterscheid, DANA Spicer and Scharmüller.

Cooling and engine

On the cooling side there are thermostats, radiator hoses, a cooling fan and engine temperature sensors. Always fit a thermostat with a fresh gasket and bleed the system properly afterwards, since an air pocket at the thermostat makes it open late. There is also a tensioning pulley for the belt drive. If you hear a hum or rattle at the front of the engine, spin the pulley by hand: roughness or play means it is time for a new one.

You will also find gaskets, including one at the exhaust by the turbocharger, seals for pressure lines and O-rings such as the one on the oil filler cap.

Lights, cab and hitch

For working after dark there are work lamps, headlights and an LED headlight, along with connection cables for tidy wiring. In the cab there is a door lock. At the rear, a drawbar ball and a separate ball fit the hitch rail.

A tip on the cooling fan

If the cooling fan is not doing its job, the temperature climbs under heavy work or in hot weather while staying normal under light load. With the engine off, look for chipped or cracked blades and feel whether the hub has play. Blow the radiator and the coolers in front of it clean with compressed air regularly, working from the inside out. Dust and chaff between the fins hold back more heat than you would expect. If the temperature sensor gives odd readings, check its plug for corrosion before replacing the sensor.

Identifying the right part

The Valtra T series comes in several types, so check the type plate first to confirm the tractor is a T 213, then compare the reference number on the old part. With a thermostat, the opening temperature printed on it matters too, and with a radiator hose the position, upper or lower.

The other types in the T series each have a page with their own parts:

Brand-wide items are collected under Valtra parts, together with parts that are not tied to a single type.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart