Menu
EUR

Valtra 6600 tractor parts & technical data

Known as both the Valtra 6600 and the Valmet 6600, this Mezzo series tractor has more than 150 parts here, from steering and front axle to trailer couplings.

142 parts found for Valtra-Valmet 6600
Show:
GRAMMER Tractor seat air suspended fabric, 480 mm, 12 V, MSG95G/721
GRAMMER
Comfort seat with air suspension and 12V compressor. Armrests, height adjustable and foldable. Weight adjustment, height adjustment 60 mm and Longitud... More
Comfort seat with air suspension and 12V compressor. Armrests, height ...
€1.051,50 €869,01
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 x 80 mm. Guide width: 30 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pat...
€638,19 €527,43
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Dipped beam, full beam. Dimensions W x H x D: 16... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€124,12 €102,58 €114,19 €94,37
You save 8%
DANA Spicer Plug front axle 745
€20,26 €16,75
MANN-FILTER Fuel filter WK731
€10,74 €8,87
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Scharmüller
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000 | Colour: AGCO grey | Guide width (mm): 30 | Rail width (mm): 335 | ... More
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€630,05 €520,70 €579,65 €479,05
You save 8%
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: consumer, 2: start, Installation dimension: Ø 16.5 mm, Without preheat... More
Version: 12 V, with 4 blade terminal connections, Switch positions: 0:...
€16,13 €13,33
Gear wheel main shaft 31 teeth Valtra-Valmet
Number of teeth: 31. More
Number of teeth: 31.
€423,24 €349,79 €389,38 €321,80
You save 8%
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: 12 V: 5-12 A, 24 V: 3-8 A, protection class: IP67, NC = normally close... More
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, powe...
€32,65 €26,98 €30,04 €24,82
You save 8%
VDO Coolant temperature sensor M14 x 1,5, +40 - +120 °C, 98 °C
VDO
Version: Temperature measuring range: +40°C to +120°C, Thread: M14 x 1.5, Resistance values: 287.4 - 22.7 ohm, Outlet: 1-pin via earth, Warning cont... More
Version: Temperature measuring range: +40°C to +120°C, Thread: M14 x...
€162,00 €133,88 €149,04 €123,17
You save 8%
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
Scharmüller
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version: Standard | Colour: AGCO grey | Load capacity (t): 3 | Length (mm): 4... More
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual...
€987,09 €815,78 €908,12 €750,51
You save 8%
Wiper motor Massey Ferguson, Valtra-Valmet
€223,30 €184,55 €205,44 €169,78
You save 8%
Filter dryer Ø 76 mm, 228 mm, connection thread M
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O-ring B = male thread 3/8"" - 18UNF Pressure switch thread: 1 3/8"" - 24 O-ring ... More
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O...
€63,79 €52,72 €58,69 €48,50
You save 8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Connection thread E: - More
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O...
€54,07 €44,69 €49,74 €41,11
You save 8%
LUK Clutch plate TZFA organic torsiegeveerd 41 x 45 mm, 22 splines
LUK
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Organic clutch lining More
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Organic...
€519,27 €429,15 €477,73 €394,82
You save 8%
DANA Spicer O-ring differential front axle 745, 2 g
Gear wheel planetary set rear axle 82 teeth Valtra-Valmet
€894,96 €739,64 €823,36 €680,47
You save 8%
Coupling sleeve transmission-input shaft Valtra-Valmet
€255,14 €210,86 €234,73 €193,99
You save 8%
Oil cooler Valtra-Valmet 6200-8950, X100-X120
€1.362,43 €1.125,98 €1.253,44 €1.035,90
You save 8%
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Cobo
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning light function. More
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard w...
€58,12 €48,03 €53,47 €44,19
You save 8%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.207,08 €997,59 €954,33 €788,70
You save 21%
FTE Clutch master cylinder Ø 25,4 mm, DOT4, gray cast iron Valtra-Valmet
FTE
Material: Grey cast iron | Hole Ø (mm): 25.4 | Medium: DOT4 | Additional information: With piston rod More
Material: Grey cast iron | Hole Ø (mm): 25.4 | Medium: DOT4 | Additio...
€209,23 €172,92 €192,49 €159,08
You save 8%
FEBI Feed pump 5 hole, 25/37 mm / 45 mm, flange 52 mm Valtra-Valmet
FEBI
To fit as: Valtra - Valmet 6200, 6300, 6400, 6600, 6800, 8000, 8050, 8150, 8450, 8550, 8750 More
To fit as: Valtra - Valmet 6200, 6300, 6400, 6600, 6800, 8000, 8050, 8...
€164,27 €135,76 €69,09 €57,10
You save 58%
MAHLE Starter motor 12 V, 3,0 kW, 11 teeth, mounting Ø 89 mm, mounting angle r 45
€505,95 €418,14 €303,03 €250,44
You save 40%
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€583,34 €482,10 €536,67 €443,53
You save 8%
MAHLE Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
MAHLE
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø (mm): - | Additional information: Compact alternator, dust-tight | Mounting L /... More
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø...
€388,90 €321,41 €232,93 €192,50
You save 40%
FEBI Turbocharger Valtra - Valmet 800, 865, 900, Mezzo 6200, 6300
FEBI
Turbocharger Valtra - Valmet 800, 865, 900, Mezzo 6200, 6300 More
Turbocharger Valtra - Valmet 800, 865, 900, Mezzo 6200, 6300
€1.088,50 €899,59
Turbocharger Case IH CS 78-110, Steyr, Valtra-Valmet
€1.328,18 €1.097,67 €1.272,81 €1.051,91
You save 4%
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
SANDEN
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connection: A2 | Nominal voltage (V): 12 | Pulley Ø (mm): 132 | Menke no.: 67... More
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a ...
€586,48 €484,69 €539,56 €445,92
You save 8%
Clutch plate 330 Z organic 41 x 45 mm, 22 splines Valtra-Valmet
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Organic...
€404,62 €334,40 €372,25 €307,65
You save 8%
As powershift-transmission 2-speed, 30 teeth Valtra-Valmet
€939,84 €776,73 €864,65 €714,59
You save 8%
LUK Central release bearing 2 connections 45,5 x 95 x 105 mm
LUK
Dimensions (mm): 45.5 x 95 x 105 More
Dimensions (mm): 45.5 x 95 x 105
€486,06 €401,70 €447,18 €369,57
You save 8%
LUK Thrust bearing driving clutch 60 x 97 x 26 Fendt, Landini, Valtra-Valmet
LUK
Dimensions (mm): 60 x 97 x 26 More
Dimensions (mm): 60 x 97 x 26
€121,34 €100,28 €111,63 €92,26
You save 8%
LUK Clutch plate UZF organic 41 x 45 mm, 22 splines Valtra-Valmet
LUK
Material specifications: Organic clutch lining | Dimensions (mm): 41 x 45 22 grooves More
Material specifications: Organic clutch lining | Dimensions (mm): 41 x...
€509,22 €420,84 €468,48 €387,18
You save 8%
MAHLE Alternator 14 V, 65 A, pulley-Ø 80 mm, form A
MAHLE
Pulley Ø (mm): 80.0 | Charging current (A): 65 | Form: A | Pulley spacing (mm): 37,0 | Nominal values (V / A): 14 / 65 | Mounting L / d / R (mm): 82,... More
Pulley Ø (mm): 80.0 | Charging current (A): 65 | Form: A | Pulley spa...
€234,35 €193,68 €140,36 €116,00
You save 40%
DANA Spicer O-ring differential front axle 755, 1 g
Master brake cylinder K1, DOT 4, Valtra-Valmet, Case IH
€137,83 €113,91 €126,80 €104,80
You save 8%
Synchro ring reversing gear Valtra-Valmet
€521,59 €431,07 €479,86 €396,58
You save 8%
Reman turbocharger Valtra-Valmet, Steyr, Case IH
€1.024,99 €847,10 €982,26 €811,79
You save 4%
LUK Clutch plate TDCA sintered 41 x 45 mm, 22 splines Valtra-Valmet
LUK
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Sintere...
€520,71 €430,34 €479,05 €395,91
You save 8%
Ball head with female thread 23,5 - 26,5 mm, M22 x 1,5, 290 mm Valmet
E (mm): 23,5 | F (mm): 26,5 | A (mm): 290 | Taper (mm): 23,5 - 26,5 | D (mm): M22 x 1,5 | C (mm): M20 x 1,5 More
E (mm): 23,5 | F (mm): 26,5 | A (mm): 290 | Taper (mm): 23,5 - 26,5 | ...
€107,98 €89,24 €99,34 €82,10
You save 8%
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Scharmüller
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail width (mm): 200 | D-value (kN): 10 | Colour: Black | Detent pin Ø (mm): ... More
Version: Standard | Category: Bearing supports | Guide width (mm): 25 ...
€668,46 €552,45 €614,98 €508,25
You save 8%
PTO shaft end piece 1 3/8 inch, 6 splines Valtra-Valmet
Version: 1 3/8"", 6 grooves More
Version: 1 3/8"", 6 grooves
€206,82 €170,93 €190,27 €157,25
You save 8%
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
CARLISLE
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth More
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€17,19 €14,20
Clutch master cylinder Valtra-Valmet 6000 - 8750, N91, T120 - T171
€197,43 €163,17 €181,64 €150,11
You save 8%
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
DANA Spicer
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120 More
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€46,81 €38,69 €43,07 €35,59
You save 8%
Showing 1 - 48 of 142

Valtra 6600 parts: steering, fuel system and cab

Play in the steering, a cab door that will not latch, a weeping feed pump. Those are typical jobs on a Valtra 6600, a member of the Mezzo series that is also known as the Valmet 6600. More than 150 parts fit this tractor, from GRANIT, Scharmüller, GRAMMER, Walterscheid and DANA Spicer.

Steering and driveline

For the front axle there are ball joints, and for the main clutch there are clutch plates. Gear wheels and O-rings, including ones for the differential, complete this group. The quickest way to check a ball joint takes two people. One rocks the steering wheel back and forth with the engine running while the other holds a hand on the joint. If you feel a click before the wheel moves, the joint is worn. Replace a torn dust boot along with the joint, otherwise the new one will soon run dry.

Fuel and cooling

  • feed pumps and seals for the feed pump
  • engine seal kits
  • a water pump repair set
  • stop cables

The feed pump draws diesel from the tank and pushes it to the filter. If it weeps at the flange, a new seal is often enough. If the engine runs rough and you see air bubbles in a clear line, the pump itself is worn. After fitting, work the hand lever until the filter is full before you start. The water pump repair set lets you refresh the existing pump instead of buying a complete new one. Coolant dripping from the small weep hole under the pump means it is time. A stiff stop cable just needs a few drops of thin oil, but replace it at once if the inner wire is fraying, because a snapped cable leaves you unable to shut the engine down the usual way.

Cab and lighting

For the cab there are door locks, tractor seats, work lamps, indicator position lights and a flasher unit. If the indicators suddenly flash twice as fast, a bulb has usually failed rather than the flasher unit, so check the bulbs first. At the back, a drawbar with ball for the hitch rail fits this model.

Identifying the right part

The type plate shows whether your tractor is badged Valtra or Valmet 6600, as both names are in use. For the feed pump, water pump or a door lock, the number on the old part tells you which version you need. With door locks, also note which side, left or right, you need.

Other Mezzo tractors

Each of these models has a page listing the parts recorded for it:

All other Valtra and Valmet models start from Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart