Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Valtra N 91 tractor parts & technical data

What fits the Valtra N 91 from the N1 series? More than 130 parts from our range, including trailer couplings, electrics and lighting for your tractor.

129 parts found for Valtra-Valmet N 91
Show:
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 x 80 mm. Guide width: 30 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pat...
€638,19 €527,43
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.104,81 €913,07 €873,47 €721,88
You save 21%
DANA Spicer Plug front axle 745
€20,26 €16,75
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: consumer, 2: start, Installation dimension: Ø 16.5 mm, Without preheat... More
Version: 12 V, with 4 blade terminal connections, Switch positions: 0:...
€16,13 €13,33
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Dipped beam, full beam. Dimensions W x H x D: 16... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€124,12 €102,58 €114,19 €94,37
You save 8%
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Scharmüller
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000 | Colour: AGCO grey | Guide width (mm): 30 | Rail width (mm): 335 | ... More
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€630,05 €520,70 €579,65 €479,05
You save 8%
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Walterscheid
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg, from 40 km/h 2,000 kg. More
Quick height adjustment with rotation lock, load capacity up to 40 km/...
€2.111,26 €1.744,84 €1.719,18 €1.420,81
You save 19%
Gear wheel main shaft 31 teeth Valtra-Valmet
Number of teeth: 31. More
Number of teeth: 31.
€423,24 €349,79 €389,38 €321,80
You save 8%
GRAMMER Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
GRAMMER
Super comfort seat with low-frequency air suspension and 12V compressor. APS: automatic positioning system. Armrests height adjustable and folding. Ad... More
Super comfort seat with low-frequency air suspension and 12V compresso...
€1.991,23 €1.645,64
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
Scharmüller
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version: Standard | Colour: AGCO grey | Load capacity (t): 3 | Length (mm): 4... More
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual...
€987,09 €815,78 €908,12 €750,51
You save 8%
Wiper motor Massey Ferguson, Valtra-Valmet
€223,30 €184,55 €205,44 €169,78
You save 8%
Filter dryer Ø 76 mm, 228 mm, connection thread M
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O-ring B = male thread 3/8"" - 18UNF Pressure switch thread: 1 3/8"" - 24 O-ring ... More
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O...
€63,79 €52,72 €58,69 €48,50
You save 8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Connection thread E: - More
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O...
€54,07 €44,69 €49,74 €41,11
You save 8%
LUK Clutch plate TZFA organic torsiegeveerd 41 x 45 mm, 22 splines
LUK
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Organic clutch lining More
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Organic...
€519,27 €429,15 €477,73 €394,82
You save 8%
Gear wheel planetary set rear axle 82 teeth Valtra-Valmet
€894,96 €739,64 €823,36 €680,47
You save 8%
Coupling sleeve transmission-input shaft Valtra-Valmet
€255,14 €210,86 €234,73 €193,99
You save 8%
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: 12 V: 5-12 A, 24 V: 3-8 A, protection class: IP67, NC = normally close... More
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, powe...
€32,65 €26,98 €30,04 €24,82
You save 8%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.207,08 €997,59 €954,33 €788,70
You save 21%
FTE Clutch master cylinder Ø 25,4 mm, DOT4, gray cast iron Valtra-Valmet
FTE
Material: Grey cast iron | Hole Ø (mm): 25.4 | Medium: DOT4 | Additional information: With piston rod More
Material: Grey cast iron | Hole Ø (mm): 25.4 | Medium: DOT4 | Additio...
€209,23 €172,92 €192,49 €159,08
You save 8%
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Cobo
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning light function. More
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard w...
€58,12 €48,03 €53,47 €44,19
You save 8%
LUK Torsion damper Valtra-Valmet C90 - C150, M120 - M150, N82 - N142
€801,39 €662,31 €737,28 €609,32
You save 8%
MAHLE Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
MAHLE
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø (mm): - | Additional information: Compact alternator, dust-tight | Mounting L /... More
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø...
€388,90 €321,41 €232,93 €192,50
You save 40%
Turbocharger Case IH CS 78-110, Steyr, Valtra-Valmet
€1.328,18 €1.097,67 €1.272,81 €1.051,91
You save 4%
Gas strut door 250 N, 345 mm, stroke 126 mm Massey Ferguson 4745ZN
suitable for: Tür. Newtons: 250. A: 345 mm. B: 175 mm. C: 8 mm. D: 8 mm. Form: 2. d1: 8 mm. d2: 18 mm. Stroke: 126 mm. Menke no.: 202912. More
suitable for: Tür. Newtons: 250. A: 345 mm. B: 175 mm. C: 8 mm. D: 8 ...
€34,26 €28,31 €31,52 €26,05
You save 8%
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
SANDEN
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connection: A2 | Nominal voltage (V): 12 | Pulley Ø (mm): 132 | Menke no.: 67... More
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a ...
€586,48 €484,69 €539,56 €445,92
You save 8%
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
€171,21 €141,50 €157,51 €130,18
You save 8%
DANA Spicer Wheel hub final drive front axle 730
€408,30 €337,44
LUK Central release bearing 2 connections 45,5 x 95 x 105 mm
LUK
Dimensions (mm): 45.5 x 95 x 105 More
Dimensions (mm): 45.5 x 95 x 105
€486,06 €401,70 €447,18 €369,57
You save 8%
Alternator 14 V, 120 A, flange 56 mm, Fendt, Valtra-Valmet
Pulley spacing (mm): - | Form: B | Additional information: Compact alternator, dust-tight | Belt tension hole Ø / R (mm): 8,3 / 86,0 | Nominal values... More
Pulley spacing (mm): - | Form: B | Additional information: Compact alt...
€275,46 €227,65 €253,42 €209,44
You save 8%
Clutches set 9+9 Valtra-Valmet 6250 - 8950, C90 - XM150
€230,48 €190,48 €212,04 €175,24
You save 8%
DANA Spicer Differential bevel gear final drive front axle 730
€244,50 €202,07 €224,94 €185,90
You save 8%
DANA Spicer Guard plate differential front axle 745
DANA Spicer Grooved nut bevel gear differential front axle 730
€82,27 €67,99 €75,69 €62,55
You save 8%
Synchro ring reversing gear Valtra-Valmet
€521,59 €431,07 €479,86 €396,58
You save 8%
Reman turbocharger Valtra-Valmet, Steyr, Case IH
€1.024,99 €847,10 €982,26 €811,79
You save 4%
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Scharmüller
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail width (mm): 200 | D-value (kN): 10 | Colour: Black | Detent pin Ø (mm): ... More
Version: Standard | Category: Bearing supports | Guide width (mm): 25 ...
€668,46 €552,45 €614,98 €508,25
You save 8%
PTO shaft end piece 1 3/8 inch, 6 splines, 245 mm Valtra-Valmet
Version: 1 3/8"", 6 grooves | Length (mm): 245 More
Version: 1 3/8"", 6 grooves | Length (mm): 245
€415,22 €343,16 €382,00 €315,70
You save 8%
PTO shaft end piece 1 3/8 inch, 6 splines Valtra-Valmet
Version: 1 3/8"", 6 grooves More
Version: 1 3/8"", 6 grooves
€206,82 €170,93 €190,27 €157,25
You save 8%
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
CARLISLE
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth More
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€17,19 €14,20
Clutch master cylinder Valtra-Valmet 6000 - 8750, N91, T120 - T171
€197,43 €163,17 €181,64 €150,11
You save 8%
DANA Spicer O-ring as front axle 745, 4 g
€17,60 €14,55
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
DANA Spicer
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120 More
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€46,81 €38,69 €43,07 €35,59
You save 8%
DANA Spicer Intermediate bush as front axle 745, 120 x 127 x 40 mm
DANA Spicer
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40 | Outer Ø (mm): 127 More
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40...
€140,42 €116,05 €129,19 €106,77
You save 8%
HELLA Alternator 14 V, 120 A Fendt, Valtra-Valmet
HELLA
Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal voltage (V): 14 More
Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal...
€554,78 €458,50 €427,45 €353,26
You save 23%
Showing 1 - 48 of 129

Valtra N 91 parts

With the right parts, a Valtra N 91 will keep working for a good many seasons yet. This page lists more than 130 of them that fit the model, from GRANIT together with DANA Spicer, Scharmüller, Walterscheid and GRAMMER.

Cooling hoses

Top and bottom radiator hoses keep the cooling system sealed. A hose that feels soft or shows cracks near the clamps is better replaced in the yard than after it bursts in the field.

Turbo, cylinder head and seals

For the engine there are remanufactured turbochargers, exhaust manifold seals at the turbo, manifold gaskets, seal kits, crankshaft seals and cylinder head bolts.

When fitting a turbocharger, prime it with clean engine oil through the oil feed before the first start, then let the engine idle for a moment so the shaft never runs dry. With a new head gasket, always use new cylinder head bolts, as the old ones have already stretched when they were last tightened. Torque them in the correct sequence and in stages.

Lights, cab and towing

For lighting there are headlights, LED headlights, work lamps and flasher units. If the indicators suddenly flash twice as fast, a failed bulb is the usual cause rather than the flasher unit. In the cab there are door locks and tractor seats, and for towing there are ball drawbars and separate balls.

Door locks and seats

A cab door that no longer shuts cleanly is not always down to the lock. First check whether the striker plate on the pillar has shifted and adjust it if needed. If the lock itself is stiff, use a dry lubricant such as graphite or silicone spray instead of grease, since grease traps dust and makes the lock heavier over time.

A sagging tractor seat makes a long day on the N 91 harder work. When replacing one, compare the mounting points underneath so the new seat fits the console without modification.

Parts for your N 91

Check the type plate to confirm it is an N 91. A turbocharger, door lock or headlight usually carries a reference number, which you compare with the product details. For radiator hoses, it helps to know if you need the top or the bottom one.

Other Valtra tractors from the N range have their own pages:

Every other model from the brand is listed under Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart