Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Valtra 700 tractor parts & technical data

Whether you call it a Valtra 700 or a Valmet 700, the more than 100 parts on this page fit it. Choose from trailer couplings, electrics, lighting and more.

103 parts found for Valtra-Valmet 700
Show:
DANA Spicer Plug front axle 745
€20,26 €16,75
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: consumer, 2: start, Installation dimension: Ø 16.5 mm, Without preheat... More
Version: 12 V, with 4 blade terminal connections, Switch positions: 0:...
€16,13 €13,33
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€630,05 €520,70 €579,65 €479,05
You save 8%
DANA Spicer Wheel bolt M18 x 1,5, 60 mm final drive front axle 730
DANA Spicer
Length (mm): 60 | Thread: M18 X 1,5 More
Length (mm): 60 | Thread: M18 X 1,5
€16,23 €13,41
Bolt set 2de steering valve 3x M8 x 180
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Control unit. More
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Co...
€29,14 €24,08
Wiper motor Massey Ferguson, Valtra-Valmet
€223,30 €184,55 €205,44 €169,78
You save 8%
Filter dryer Ø 76 mm, 228 mm, connection thread M
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O-ring B = male thread 3/8"" - 18UNF Pressure switch thread: 1 3/8"" - 24 O-ring ... More
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O...
€63,79 €52,72 €58,69 €48,50
You save 8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Connection thread E: - More
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O...
€54,07 €44,69 €49,74 €41,11
You save 8%
DANA Spicer O-ring differential front axle 745, 2 g
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: 12 V: 5-12 A, 24 V: 3-8 A, protection class: IP67, NC = normally close... More
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, powe...
€32,65 €26,98 €30,04 €24,82
You save 8%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.207,08 €997,59 €954,33 €788,70
You save 21%
Master brake cylinder Valtra-Valmet 700-1203
€109,72 €90,68 €100,94 €83,42
You save 8%
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Cobo
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning light function. More
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard w...
€58,12 €48,03 €53,47 €44,19
You save 8%
LUK Clutch kit Valtra-Valmet 700 - 1203
LUK
Contents: Pressure plate 458231010210, clutch plate 458331027010 More
Contents: Pressure plate 458231010210, clutch plate 458331027010
€1.501,27 €1.240,72 €1.431,17 €1.182,79
You save 5%
MAHLE Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
MAHLE
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø (mm): - | Additional information: Compact alternator, dust-tight | Mounting L /... More
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø...
€388,90 €321,41 €232,93 €192,50
You save 40%
LUK Clutch 310/310TGU 41 x 45 mm, 22 splines Valtra-Valmet 700 - 1203
LUK
Dimensions (mm): 41 x 45 22 grooves More
Dimensions (mm): 41 x 45 22 grooves
€1.483,60 €1.226,12 €1.414,91 €1.169,35
You save 5%
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
SANDEN
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connection: A2 | Nominal voltage (V): 12 | Pulley Ø (mm): 132 | Menke no.: 67... More
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a ...
€586,48 €484,69 €539,56 €445,92
You save 8%
Repair set clutch cylinder DOT4 Valtra-Valmet 700 - 1203
Slave cylinder Valtra-Valmet 700 - 1203
€115,30 €95,29 €106,08 €87,67
You save 8%
Aircon compressor 12 V, pulley-Ø 135 mm, 2 grooves
Pulley Ø (mm): 135 | Oil quantity (ccm): 180 | Fixing: EM | Suitable oil: PAG 46 | Nominal voltage (V): 12 | Refrigerant: R 134a | No. of grooves: 2 More
Pulley Ø (mm): 135 | Oil quantity (ccm): 180 | Fixing: EM | Suitable ...
€654,26 €540,71 €601,92 €497,45
You save 8%
LUK Clutch plate 310UKF 1 1/8 inch, 10 splines Valtra-Valmet 700 - 1203
LUK
Material specifications: Organic clutch lining | Dimensions (inches): 1 1/8"" 10 grooves More
Material specifications: Organic clutch lining | Dimensions (inches): ...
€303,03 €250,44 €278,79 €230,40
You save 8%
Thrust bearing 1,76 kg Massey Ferguson 4435 - 4455, Valtra-Valmet
€176,26 €145,67 €162,16 €134,02
You save 8%
MAHLE Alternator 14 V, 65 A, pulley-Ø 80 mm, form A
MAHLE
Pulley Ø (mm): 80.0 | Charging current (A): 65 | Form: A | Pulley spacing (mm): 37,0 | Nominal values (V / A): 14 / 65 | Mounting L / d / R (mm): 82,... More
Pulley Ø (mm): 80.0 | Charging current (A): 65 | Form: A | Pulley spa...
€234,35 €193,68 €140,36 €116,00
You save 40%
MAHLE Starter motor 12 V, 3,0 kW, 11 teeth, mounting Ø 89 mm, mounting angle r 45
€505,95 €418,14 €303,03 €250,44
You save 40%
Master cylinder clutch piston-Ø 15,87 mm Valtra-Valmet 700-1203
€255,30 €210,99 €234,88 €194,11
You save 8%
LUK Clutch plate 280UKF 1 1/8 inch, 10 splines, organic
LUK
Dimensions (inches): 1 1/8"" 10 grooves | Material specifications: Organic clutch lining More
Dimensions (inches): 1 1/8"" 10 grooves | Material specifications: Org...
€131,87 €108,98 €121,32 €100,26
You save 8%
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
DANA Spicer
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120 More
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€46,81 €38,69 €43,07 €35,59
You save 8%
DANA Spicer Intermediate bush as front axle 745, 120 x 127 x 40 mm
DANA Spicer
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40 | Outer Ø (mm): 127 More
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40...
€140,42 €116,05 €129,19 €106,77
You save 8%
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 254 mm, clockwise
€510,93 €422,26 €306,01 €252,90
You save 40%
Bolt set 1ste steering valve 3x M8 x 90
Technical data: 3x M8 x 90. More
Technical data: 3x M8 x 90.
€18,40 €15,21
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€77,66 €64,18 €71,45 €59,05
You save 8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 475, 484, 584, 674, 684, 784, 884 385, 485, 485XL, 585, 585XL, 685, 685... More
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 4...
€48,67 €40,22 €44,78 €37,01
You save 8%
Aircon compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil
Reference no.: QP7H15-8024 | Suitable oil: PAG 46 | For compressor: 7H15 | Nominal voltage (V): 12 | Pulley Ø (mm): 132 | Fixing: EM | Oil quantity (... More
Reference no.: QP7H15-8024 | Suitable oil: PAG 46 | For compressor: 7H...
€357,93 €295,81 €329,30 €272,15
You save 8%
DANA Spicer Sealing ring final drive front axle 755, 40 x 65 x 18 mm
DANA Spicer
Dimensions (mm): 40 x 65 x 18 More
Dimensions (mm): 40 x 65 x 18
€33,83 €27,96 €31,12 €25,72
You save 8%
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF. More
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€33,85 €27,98
Feed pump 3 hole, 52 x 34 mm, lever 23 mm Valtra-Valmet
Version: 3 holes, Vertical hole spacing = 52 mm, Horizontal hole spacing = 34 mm, Flange to lever end = 23 mm. More
Version: 3 holes, Vertical hole spacing = 52 mm, Horizontal hole spaci...
€63,07 €52,12 €58,02 €47,95
You save 8%
Door lock, left Massey Ferguson, Case IH, Steyr
€49,57 €40,97 €45,60 €37,69
You save 8%
Ball joint left 5 notches taper 16,2 - 18,3 mm, 310 mm, M14 x 1,5
A: 310 mm. C: M14 x 1,5 mm. D: 18 mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2 - 18,3 mm. More
A: 310 mm. C: M14 x 1,5 mm. D: 18 mm. E: 16,2 mm. F: 18,3 mm. Taper: 1...
€79,66 €65,83 €73,29 €60,57
You save 8%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€38,47 €31,79 €35,39 €29,25
You save 8%
Cylinder head bolt 12 x 140 mm Massey Ferguson, Case IH, Steyr
Dimensions: M12 x 140 mm. More
Dimensions: M12 x 140 mm.
€15,23 €12,58
Connecting rod bolt 85 mm Valtra-Valmet, Case IH, Steyr
Dimensions: 85 mm long. More
Dimensions: 85 mm long.
€42,51 €35,13 €39,11 €32,32
You save 8%
Bolt set 2de steering valve 3x M8 x 130
Technical data: 3x M8 x 130. Description: For 1st Control unit. More
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€15,63 €12,91
Door lock, left Fendt Farmer 240 S (Typ 294), GT 395
€59,42 €49,11 €54,67 €45,18
You save 8%
Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: white. Connection: Blade terminal... More
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 ...
€27,39 €22,63
Showing 1 - 48 of 103

Valtra 700 parts

Older examples still say Valmet 700 on the type plate, later ones Valtra 700. As far as parts go, it is the same tractor. This page lists more than 100 parts matched to it, from GRANIT and from DANA Spicer, Walterscheid, MAHLE and LUK.

Engine work

A leaking water pump does not have to mean a whole new pump. A water pump repair kit replaces the bearing and seal while the housing stays in place. You will also find valve cover gaskets, connecting rod bolts, a crankshaft seal, a gasket between the silencer and the turbocharger, and seals for the feed pump.

A word on the crankshaft seal. Before fitting the new one, look closely at the shaft. The old seal has often worn a fine groove into the running surface, and if the new lip sits right in that track it will soon leak again. Either set the seal slightly deeper or shallower, or restore the surface with a repair sleeve. Lightly oil the lip and drive the seal in squarely with a suitable drift.

Cab, lights and hitch

  • A door lock for the cab.
  • Work lamps and indicator position lights.
  • A flasher unit for the indicators.
  • An air conditioning compressor.
  • Ball joints for the steering, a ball-type drawbar and a bolt set for the second spool valve.

Connecting rod bolts and the valve cover

If the engine is opened up for new bearings, fit new connecting rod bolts. They are tightened into their stretch range and cannot be trusted a second time. Tighten them in stages, first to torque and then through a set angle, as the workshop data specifies. Lay a valve cover gasket on a clean face without any trace of grease and tighten the bolts in a cross pattern without overdoing it. Overtightened, the gasket squeezes out at the sides and the cover weeps as badly as before. While the cover is off, check the breather, since a blocked one pushes oil past every seal.

Getting the right part for a Valmet 700

The type plate confirms you have a 700 and not an 800 or 900. If you still have the old part, copy the number on it. On engine parts it is usually stamped into the edge, on electrical parts it sits on a label or in the housing. Compare that reference number with the product details. For the door lock and ball joints, make sure you pick the correct side.

If you look after more than one Valtra:

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart