Menu
EUR

Valtra T 151 tractor parts & technical data

One page, more than 110 parts: the Valtra T 151 from the T1 series is covered here with trailer couplings, lighting, electrics and other groups.

116 parts found for Valtra-Valmet T 151
Show:
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 x 80 mm. Guide width: 30 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pat...
€638,19 €527,43
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Dipped beam, full beam. Dimensions W x H x D: 16... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€124,12 €102,58 €114,19 €94,37
You save 8%
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.104,81 €913,07 €873,47 €721,88
You save 21%
DANA Spicer Plug front axle 745
€20,26 €16,75
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Scharmüller
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000 | Colour: AGCO grey | Guide width (mm): 30 | Rail width (mm): 335 | ... More
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€630,05 €520,70 €579,65 €479,05
You save 8%
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: consumer, 2: start, Installation dimension: Ø 16.5 mm, Without preheat... More
Version: 12 V, with 4 blade terminal connections, Switch positions: 0:...
€16,13 €13,33
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Walterscheid
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg, from 40 km/h 2,000 kg. More
Quick height adjustment with rotation lock, load capacity up to 40 km/...
€2.111,26 €1.744,84 €1.719,18 €1.420,81
You save 19%
Gear wheel main shaft 31 teeth Valtra-Valmet
Number of teeth: 31. More
Number of teeth: 31.
€423,24 €349,79 €389,38 €321,80
You save 8%
BOSCH High-pressure pump CP1H Fendt, Massey Ferguson, Valtra-Valmet
€1.964,66 €1.623,69 €1.665,11 €1.376,13
You save 15%
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: 12 V: 5-12 A, 24 V: 3-8 A, protection class: IP67, NC = normally close... More
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, powe...
€32,65 €26,98 €30,04 €24,82
You save 8%
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
Scharmüller
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version: Standard | Colour: AGCO grey | Load capacity (t): 3 | Length (mm): 4... More
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual...
€987,09 €815,78 €908,12 €750,51
You save 8%
Wiper motor Massey Ferguson, Valtra-Valmet
€223,30 €184,55 €205,44 €169,78
You save 8%
Filter dryer Ø 76 mm, 228 mm, connection thread M
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O-ring B = male thread 3/8"" - 18UNF Pressure switch thread: 1 3/8"" - 24 O-ring ... More
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O...
€63,79 €52,72 €58,69 €48,50
You save 8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Connection thread E: - More
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O...
€54,07 €44,69 €49,74 €41,11
You save 8%
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Cobo
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning light function. More
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard w...
€58,12 €48,03 €53,47 €44,19
You save 8%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.207,08 €997,59 €954,33 €788,70
You save 21%
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€583,34 €482,10 €536,67 €443,53
You save 8%
GRAMMER Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
GRAMMER
Super comfort seat with low-frequency air suspension and 12V compressor. APS: automatic positioning system. Armrests height adjustable and folding. Ad... More
Super comfort seat with low-frequency air suspension and 12V compresso...
€1.991,23 €1.645,64
MAHLE Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
MAHLE
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø (mm): - | Additional information: Compact alternator, dust-tight | Mounting L /... More
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø...
€388,90 €321,41 €232,93 €192,50
You save 40%
Gas strut door 250 N, 345 mm, stroke 126 mm Massey Ferguson 4745ZN
suitable for: Tür. Newtons: 250. A: 345 mm. B: 175 mm. C: 8 mm. D: 8 mm. Form: 2. d1: 8 mm. d2: 18 mm. Stroke: 126 mm. Menke no.: 202912. More
suitable for: Tür. Newtons: 250. A: 345 mm. B: 175 mm. C: 8 mm. D: 8 ...
€34,26 €28,31 €31,52 €26,05
You save 8%
Hydraulic lifting strut 540 - 650 mm, clevis / ball joint
D (mm): 70 | C (mm): 35 | L (mm): 540 - 650 | To fit: Valtra & Valmet | Type: Clevis joint/ball joint | S1 (mm): 32 | A (mm): 40 | B (mm): 28 More
D (mm): 70 | C (mm): 35 | L (mm): 540 - 650 | To fit: Valtra & Valmet ...
€643,17 €531,55 €591,72 €489,02
You save 8%
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
SANDEN
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connection: A2 | Nominal voltage (V): 12 | Pulley Ø (mm): 132 | Menke no.: 67... More
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a ...
€586,48 €484,69 €539,56 €445,92
You save 8%
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
€171,21 €141,50 €157,51 €130,18
You save 8%
Alternator 14 V, 120 A, flange 56 mm, Fendt, Valtra-Valmet
Pulley spacing (mm): - | Form: B | Additional information: Compact alternator, dust-tight | Belt tension hole Ø / R (mm): 8,3 / 86,0 | Nominal values... More
Pulley spacing (mm): - | Form: B | Additional information: Compact alt...
€275,46 €227,65 €253,42 €209,44
You save 8%
Clutches set 9+9 Valtra-Valmet 6250 - 8950, C90 - XM150
€230,48 €190,48 €212,04 €175,24
You save 8%
SACHS Shock absorber rear, gas pressure MSE27/13X47A2 Valtra-Valmet
SACHS
Dimensions (mm): MSE27/13X47A2 | Installation location: Rear | Design: Gas pressure | To fit: Valtra | System: Twin-tube More
Dimensions (mm): MSE27/13X47A2 | Installation location: Rear | Design:...
€698,55 €577,31 €642,67 €531,13
You save 8%
DANA Spicer King pin final drive front axle 755
€114,51 €94,64 €105,35 €87,07
You save 8%
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Scharmüller
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail width (mm): 200 | D-value (kN): 10 | Colour: Black | Detent pin Ø (mm): ... More
Version: Standard | Category: Bearing supports | Guide width (mm): 25 ...
€668,46 €552,45 €614,98 €508,25
You save 8%
PTO shaft end piece 1 3/8 inch, 6 splines, 245 mm Valtra-Valmet
Version: 1 3/8"", 6 grooves | Length (mm): 245 More
Version: 1 3/8"", 6 grooves | Length (mm): 245
€415,22 €343,16 €382,00 €315,70
You save 8%
PTO shaft end piece 1 3/8 inch, 6 splines Valtra-Valmet
Version: 1 3/8"", 6 grooves More
Version: 1 3/8"", 6 grooves
€206,82 €170,93 €190,27 €157,25
You save 8%
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
CARLISLE
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth More
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€17,19 €14,20
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 210 ccm
No. of grooves: 2 | Nominal voltage (V): 12 | Connection: 7/8"" x 3/4"", vertical | Oil quantity (ccm): 210 | Suitable oil: PAG 46 | Fixing: EM | Pull... More
No. of grooves: 2 | Nominal voltage (V): 12 | Connection: 7/8"" x 3/4"...
€426,97 €352,87 €392,81 €324,64
You save 8%
DANA Spicer O-ring as front axle 745, 4 g
€17,60 €14,55
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
DANA Spicer
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120 More
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€46,81 €38,69 €43,07 €35,59
You save 8%
DANA Spicer Intermediate bush as front axle 745, 120 x 127 x 40 mm
DANA Spicer
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40 | Outer Ø (mm): 127 More
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40...
€140,42 €116,05 €129,19 €106,77
You save 8%
HELLA Alternator 14 V, 120 A Fendt, Valtra-Valmet
HELLA
Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal voltage (V): 14 More
Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal...
€554,78 €458,50 €427,45 €353,26
You save 23%
Clutch plate set omkeerinrichting Valtra-Valmet
€486,96 €402,45 €448,00 €370,25
You save 8%
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
Scharmüller
suitable for: Valtra. Series: C-Serie. Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Dimensions: shaft height x width: 60 x 80 mm... More
suitable for: Valtra. Series: C-Serie. Category: Pick-up hitch. Versio...
€1.428,29 €1.180,41 €1.314,03 €1.085,97
You save 8%
Oil cooler Valtra-Valmet T 120 - T 190, T 121 - T 191
€1.776,78 €1.468,41 €1.634,64 €1.350,94
You save 8%
Showing 1 - 48 of 116

Valtra T 151 parts for cooling, cab and lighting

When the temperature gauge on a T 151 creeps up under load, the hoses and thermostat are the usual place to start. This page brings together more than 110 new Valtra T 151 parts from GRANIT, Scharmüller, Walterscheid, DANA Spicer and Cobo.

Hoses, thermostat and coolant flow

There are radiator hoses, including the top hose, hose elbows, thermostats and the matching thermostat gasket. Once a hose has been replaced, bleed the system properly. Run the engine with the radiator cap off and the heater on full until the thermostat opens and the bubbles stop. A trapped air pocket around the thermostat is a common cause of a gauge that keeps wandering. Fit new clamps with every new hose and nip them up again after a few hours of warm running, because the rubber settles.

Engine seals

Crankshaft seals, O-rings for the oil side and seals for the lubrication line round off the engine group. A thermostat always goes in with a new gasket and the correct way round. A leaking front crankshaft seal often goes unnoticed until oily dirt starts building up on the radiator. Press a new seal in squarely with a suitable drift, never by hitting the edge directly, or it distorts and leaks straight away.

Cab, air conditioning and lights

Door locks and aircon compressors keep the cab usable, which matters on a tractor with this much glass in summer. Headlights, LED headlights and work lamps light up the job after dark, and a flasher unit brings faulty indicators back to life. For towing there are drawbars and separate balls for the rail hitch. A ball with a visibly worn flank gives a knock when pulling away and braking, so replace it before the trailer eye starts to wear too. A new aircon compressor should go in with a new receiver drier, and the system needs to be evacuated before it is recharged.

Matching parts to the T 151

Your type plate shows the exact model. With hoses, lay the old one next to the picture, since the length and bends need to match. With a hose elbow, check the diameter at both ends as well. Thermostats and compressors usually carry a number you can compare with the details shown with the item.

From the same range, the Valtra T 171 has a page of its own with the parts selected for that type, useful if both stand in your yard. For every other model from the brand, head to Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart