Menu
EUR

Valtra T 214 tractor parts & technical data

Do you run a Valtra T 214? For this T4 series model we have gathered more than 50 parts, including electrics and brake and transmission parts.

54 parts found for Valtra-Valmet T 214
Show:
Wabco Solenoid valve 3/2-way, 12 V, 1,41 A, M16 x 1,5, standard closed
Wabco
Eligible: Environmental protection and safety (formerly de minimis) More
Eligible: Environmental protection and safety (formerly de minimis)
€408,59 €337,68 €375,90 €310,66
You save 8%
Wabco Electrically controlled air dryer M22 x 1,5, cartridge M39, 13 bar
€412,20 €340,66 €379,22 €313,41
You save 8%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€630,05 €520,70 €579,65 €479,05
You save 8%
BOSCH Fuel pre-filter line filter D 37 mm, H 105 mm, connection 6 mm
BOSCH
C (mm): 35 | F: 6 | D (mm): 37 | H (mm): 105 | Height (mm): 105 | Version: Leitungsfilter | G (mm): 6 | Additional information: Typformel: F4058 | Ø ... More
C (mm): 35 | F: 6 | D (mm): 37 | H (mm): 105 | Height (mm): 105 | Vers...
€3,99 €3,30
SACHS Shock absorber rear, air spring PSE36/20X71A2ED Valtra-Valmet
SACHS
To fit: Valtra | System: Air suspension bellows and shock absorber make a complete air spring | Dimensions (mm): PSE36/20X71A2ED | Installation locati... More
To fit: Valtra | System: Air suspension bellows and shock absorber mak...
€1.483,26 €1.225,83 €1.364,60 €1.127,77
You save 8%
NOX sensor Massey Ferguson, Valtra-Valmet, Fendt
To fit: Massey Ferguson, Valtra-Valmet, Fendt. More
To fit: Massey Ferguson, Valtra-Valmet, Fendt.
€453,61 €374,88 €417,32 €344,89
You save 8%
MASSEY FERGUSON Waterpompset Valtra-Valmet T144-T254, Massey Ferguson 7614-7726
MASSEY FERGUSON
Reference no.: ACP055583C, ACP055583B, ACP055583A, V837091197, V837091112. More
Reference no.: ACP055583C, ACP055583B, ACP055583A, V837091197, V837091...
€954,01 €788,44
Walterscheid Inner part ball 80 rail width 390 mm, pin Ø 25 mm, 4000 kg
Walterscheid
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value (kN): 102 | Detent pin Ø (mm): 25 | Rail width (mm): 390 | Description: This pr... More
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value ...
€2.263,90 €1.870,99 €1.789,86 €1.479,23
You save 21%
Walterscheid Piton Fix rail width 390 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.781,58 €1.472,38 €1.408,53 €1.164,08
You save 21%
Scharmüller Forced steering 80 Pick-Up Hitch einsätze K50, 2 ton, 101 mm
Scharmüller
Assembly notes: Both ends. Lock: K50. Steering power: 2 t. Internal width: 101 mm. Colour: Black. Description: Approved for steering forces up to 20 k... More
Assembly notes: Both ends. Lock: K50. Steering power: 2 t. Internal wi...
€1.031,70 €852,64 €977,51 €807,86
You save 5%
Walterscheid Drawbar ball 80 automatic, rail 390 mm, pin Ø 25 mm, 2000/2800 kg
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 2000 / 2800 kg. Colour: black. Description: This product is a ball hitch.... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.277,79 €1.882,47 €1.850,84 €1.529,62
You save 19%
Scharmüller Schroefkogeladapter K80 D 118 kN, nose weight 3000 kg, M16 / M20
Scharmüller
Category: Components and special solutions | Lock: ball 80 | Hole (mm): M16 / M20 | Description: Compatible with JD drawbar Cat. 4 (ex works) | V-valu... More
Category: Components and special solutions | Lock: ball 80 | Hole (mm)...
€1.926,92 €1.592,50 €1.772,77 €1.465,10
You save 8%
Scharmüller Schroefkogeladapter K80 3000 kg, 118 kN, bore M16 / M20, black
Scharmüller
V-value (kN): 83 | Hole (mm): M16 / M20 | Version: Threaded ball adapter K80 | Description: Suitable for Scharmüller drawbar part no. 10.820.9270.0 |... More
V-value (kN): 83 | Hole (mm): M16 / M20 | Version: Threaded ball adapt...
€1.926,92 €1.592,50 €1.822,77 €1.506,42
You save 5%
Scharmüller Schroefkogeladapter K80 3000 kg, 118 kN, bore M16, thread M20, black
Scharmüller
D-value (kN): 118 | Thread: M20 | Hole (mm): M16 | Load capacity (kg): 3000 | Lock: ball 80 | Colour: Black | Description: Compatible with CNH drawbar... More
D-value (kN): 118 | Thread: M20 | Hole (mm): M16 | Load capacity (kg):...
€1.926,92 €1.592,50 €1.822,77 €1.506,42
You save 5%
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 4,86 kg
Scharmüller
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Conn... More
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: An...
€481,06 €397,57 €453,50 €374,79
You save 6%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 175 mm. Colour: Black. Overhang... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
Temperature sensor exhaust aftertreatment
€233,28 €192,79 €214,62 €177,37
You save 8%
Differential pressure sensor Massey Ferguson, Valtra-Valmet, Fendt
€176,91 €146,21 €169,54 €140,11
You save 4%
Rail pressure sensor Valtra-Valmet, Fendt, Massey Ferguson
€295,33 €244,07 €271,70 €224,55
You save 8%
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 170 mm. Colour: Black. Overhang... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
NOX sensor Massey Ferguson, Challenger, Valtra-Valmet
€874,29 €722,55 €804,35 €664,75
You save 8%
Tank cap engine cooling
€46,16 €38,15 €42,47 €35,10
You save 8%
Signal transmitter exhaust aftertreatment Valtra-Valmet T 144 - T 254
€633,59 €523,63 €582,90 €481,74
You save 8%
AdBlue-feed unit Valtra-Valmet A84-A134
Description: AdBlue supply units ensure even metering of AdBlue depending on the load on the common rail engine. It is important that only filtered ur... More
Description: AdBlue supply units ensure even metering of AdBlue depend...
€1.047,79 €865,94 €963,97 €796,67
You save 8%
Rear-view mirror 435 x 223 mm, left or right control Fendt
Dimensions: 435 x 223 mm. Version: Left or right control. Installation location: Right/left. Notes: Manual operation. More
Dimensions: 435 x 223 mm. Version: Left or right control. Installation...
€106,52 €88,03 €98,00 €80,99
You save 8%
Temperature sensor Fendt, Massey Ferguson, Valtra-Valmet
€94,76 €78,31 €87,18 €72,05
You save 8%
Radiator hose, top Valtra-Valmet T 144 - T 254
€58,78 €48,58 €54,08 €44,69
You save 8%
Scharmüller Pick-Up Hitch einsätze 80 shank 70 x 80 mm, 445 mm, bore 30,5 mm
Scharmüller
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Overhang: 360 mm. Hole: 30,5 mm. ... More
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hi...
€1.465,37 €1.211,05
AdBlue-filter Fendt, John Deere, Massey Ferguson
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no.: P956170. Fleetguard no.: UF101. Hifi no.: SD70380. Hengst no.: E103UD295. More
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no....
€59,17 €48,90 €54,44 €44,99
You save 8%
Tensioning pulley Ø 74 / 46,3 mm, PK12
€46,78 €38,66 €43,04 €35,57
You save 8%
Belt tensioner Ø 75 mm, width 46,5 mm Fendt, Massey Ferguson
Outer Ø: 75 mm. Width: 46,5 mm. More
Outer Ø: 75 mm. Width: 46,5 mm.
€135,96 €112,36 €125,08 €103,37
You save 8%
AdBlue injection unit Valtra-Valmet, Fendt
€717,52 €592,99 €660,12 €545,55
You save 8%
Scharmüller Forced steering inner part left Ball 80 to K50 250 mm, 2 ton
Scharmüller
Assembly notes: Anticlockwise. Steering power: 2 t. Lock: K50. Description: Approved for steering forces up to 20 kN (2 t). Load capacity: 2 t. Load c... More
Assembly notes: Anticlockwise. Steering power: 2 t. Lock: K50. Descrip...
€481,06 €397,57 €453,50 €374,79
You save 6%
Walterscheid Adapter plate rail width 390 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 2800 kg. D-value: 89,3 kN. Central hole: 95 mm. Hole pattern: 160 x 100 m... More
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€1.150,89 €951,15 €909,90 €751,99
You save 21%
Showing 1 - 48 of 54

Valtra T 214 parts for cooling, exhaust sensors and hitching

When the temperature gauge on a T 214 starts creeping, the question is always the same: thermostat, hose or sensor? This page lists more than 50 parts for the Valtra T 214, and a good share of them deal with the cooling circuit and engine management. Think temperature sensors, thermostats, radiator hoses and belt tensioners. There are also NOx sensors for the exhaust aftertreatment and a lockable fuel filler cap.

Cooling circuit and sensors

The top radiator hose, the thermostat and the temperature sensor are often replaced together when an engine runs hot or never gets up to temperature. The belt tensioner belongs on that list as well. A slipping belt means the water pump is not turning properly, which can look very much like a thermostat fault.

When you change the thermostat, always fit a new seal, clean the mating face and bleed the system thoroughly after filling. Then run the engine up with the cab heater open and feel whether the top hose warms evenly. If it stays cold while the gauge climbs, there is still air trapped or the thermostat is not opening. While you are there, squeeze the other hoses too. Any that feel soft or swollen are due for replacement.

Rear hitching

For the back of the tractor there are parts from Scharmüller and Walterscheid: drawbars, screw-on ball adapters, forced steering inserts for the Pick-Up Hitch, support plates, an adapter plate and a Piton Fix. A rear-view mirror for the cab completes the picture. Measure the rail width and the mounting of what is fitted now before ordering a drawbar or ball adapter, so the new part drops straight in.

Ordering with confidence

Several parts for the T 214 are shared with Massey Ferguson and Fendt models, which you will see in the product description. Your own tractor is still the reference. The type plate gives the model and serial number, and a sensor or thermostat you have taken off usually carries a reference number. Compare that number with the description on this page before ordering.

Five sister models sit next to this tractor in the Valtra T4 line. Each of the other tractors in that range has its own page, which helps when you run more than one Valtra:

Older Valmet tractors and the rest of the line-up are grouped under Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart