Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Valtra N 104 tractor parts & technical data

Every item on this page fits the Valtra N 104. Pick from more than 50 parts, including trailer couplings, electrics and parts for the steering and front axle.

51 parts found for Valtra-Valmet N 104
Show:
Wabco Solenoid valve 3/2-way, 12 V, 1,41 A, M16 x 1,5, standard closed
Wabco
Eligible: Environmental protection and safety (formerly de minimis) More
Eligible: Environmental protection and safety (formerly de minimis)
€408,59 €337,68 €375,90 €310,66
You save 8%
SACHS Shock absorber rear, air spring PSE36/20X71A2ED Valtra-Valmet
SACHS
To fit: Valtra | System: Air suspension bellows and shock absorber make a complete air spring | Dimensions (mm): PSE36/20X71A2ED | Installation locati... More
To fit: Valtra | System: Air suspension bellows and shock absorber mak...
€1.483,26 €1.225,83 €1.364,60 €1.127,77
You save 8%
NOX sensor Massey Ferguson, Valtra-Valmet, Fendt
To fit: Massey Ferguson, Valtra-Valmet, Fendt. More
To fit: Massey Ferguson, Valtra-Valmet, Fendt.
€453,61 €374,88 €417,32 €344,89
You save 8%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€630,05 €520,70 €579,65 €479,05
You save 8%
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Walterscheid
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg, from 40 km/h 2,000 kg. More
Quick height adjustment with rotation lock, load capacity up to 40 km/...
€2.111,26 €1.744,84 €1.719,18 €1.420,81
You save 19%
Walterscheid Inner part ball 80 rail width 390 mm, pin Ø 25 mm, 4000 kg
Walterscheid
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value (kN): 102 | Detent pin Ø (mm): 25 | Rail width (mm): 390 | Description: This pr... More
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value ...
€2.263,90 €1.870,99 €1.789,86 €1.479,23
You save 21%
Walterscheid Piton Fix rail width 390 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.781,58 €1.472,38 €1.408,53 €1.164,08
You save 21%
Scharmüller Forced steering 80 Pick-Up Hitch einsätze K50, 2 ton, 101 mm
Scharmüller
Assembly notes: Both ends. Lock: K50. Steering power: 2 t. Internal width: 101 mm. Colour: Black. Description: Approved for steering forces up to 20 k... More
Assembly notes: Both ends. Lock: K50. Steering power: 2 t. Internal wi...
€1.031,70 €852,64 €977,51 €807,86
You save 5%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.207,08 €997,59 €954,33 €788,70
You save 21%
GRAMMER Tractor seat Maximo Dynamic DDS air suspended 550 mm Valtra
GRAMMER
Lordosenstütze: Pneumatic, 2-way | Joystick console: Yes | Restraint system: Optional | Upholstery type: Fabric | Suspension: Air suspension | Includ... More
Lordosenstütze: Pneumatic, 2-way | Joystick console: Yes | Restraint ...
€4.605,60 €3.806,28
Denso Air conditioning compressor 12 V, pulley Ø 120 mm, 8 grooves
Denso
No. of grooves: 8 | Nominal voltage (V): 12 | Fixing: DM | Oil quantity (ccm): 220 | Pulley Ø (mm): 120 | Refrigerant: R 134a | Suitable oil: ND-oil More
No. of grooves: 8 | Nominal voltage (V): 12 | Fixing: DM | Oil quantit...
€951,15 €786,08
Walterscheid Drawbar ball 80 automatic, rail 390 mm, pin Ø 25 mm, 2000/2800 kg
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 2000 / 2800 kg. Colour: black. Description: This product is a ball hitch.... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.277,79 €1.882,47 €1.850,84 €1.529,62
You save 19%
Scharmüller Schroefkogeladapter K80 D 118 kN, nose weight 3000 kg, M16 / M20
Scharmüller
Category: Components and special solutions | Lock: ball 80 | Hole (mm): M16 / M20 | Description: Compatible with JD drawbar Cat. 4 (ex works) | V-valu... More
Category: Components and special solutions | Lock: ball 80 | Hole (mm)...
€1.926,92 €1.592,50 €1.772,77 €1.465,10
You save 8%
Scharmüller Schroefkogeladapter K80 3000 kg, 118 kN, bore M16 / M20, black
Scharmüller
V-value (kN): 83 | Hole (mm): M16 / M20 | Version: Threaded ball adapter K80 | Description: Suitable for Scharmüller drawbar part no. 10.820.9270.0 |... More
V-value (kN): 83 | Hole (mm): M16 / M20 | Version: Threaded ball adapt...
€1.926,92 €1.592,50 €1.822,77 €1.506,42
You save 5%
Scharmüller Schroefkogeladapter K80 3000 kg, 118 kN, bore M16, thread M20, black
Scharmüller
D-value (kN): 118 | Thread: M20 | Hole (mm): M16 | Load capacity (kg): 3000 | Lock: ball 80 | Colour: Black | Description: Compatible with CNH drawbar... More
D-value (kN): 118 | Thread: M20 | Hole (mm): M16 | Load capacity (kg):...
€1.926,92 €1.592,50 €1.822,77 €1.506,42
You save 5%
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 4,86 kg
Scharmüller
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Conn... More
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: An...
€481,06 €397,57 €453,50 €374,79
You save 6%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 175 mm. Colour: Black. Overhang... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
Ball joint 247 mm, D M24 x 1,5, tube Ø 36 mm
A: 247 mm. D: M24 x 1,5 mm. E: 27 mm. F: 30,2 mm. Tube Ø: 36 mm. More
A: 247 mm. D: M24 x 1,5 mm. E: 27 mm. F: 30,2 mm. Tube Ø: 36 mm.
€80,80 €66,78 €74,34 €61,43
You save 8%
Clutch plate set omkeerinrichting Valtra-Valmet
€486,96 €402,45 €448,00 €370,25
You save 8%
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
Scharmüller
suitable for: Valtra. Series: C-Serie. Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Dimensions: shaft height x width: 60 x 80 mm... More
suitable for: Valtra. Series: C-Serie. Category: Pick-up hitch. Versio...
€1.428,29 €1.180,41 €1.314,03 €1.085,97
You save 8%
BOSCH Pressure regulator CP4 Valtra-Valmet, Fendt, Massey Ferguson
€184,72 €152,66 €156,56 €129,39
You save 15%
Rail pressure sensor Fendt 5255L-9470X, Massey Ferguson Series 5600-9530
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Colour: Black. Description: This product is a b... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.152,79 €1.779,17 €1.702,02 €1.406,63
You save 21%
Pressure pipe Fendt, Massey Ferguson
Designation: For 38015243. More
Designation: For 38015243.
€133,71 €110,50
Signal transmitter exhaust aftertreatment Valtra-Valmet N4
€594,79 €491,56 €547,21 €452,24
You save 8%
Temperature sensor Fendt, Massey Ferguson, Valtra-Valmet
€94,76 €78,31 €87,18 €72,05
You save 8%
AdBlue-feed unit Valtra-Valmet A84-A134
Description: AdBlue supply units ensure even metering of AdBlue depending on the load on the common rail engine. It is important that only filtered ur... More
Description: AdBlue supply units ensure even metering of AdBlue depend...
€1.047,79 €865,94 €963,97 €796,67
You save 8%
Scharmüller Support plates ball 80, 3000 kg, 670 x 280 mm, thickness 50 mm Valtra
Scharmüller
suitable for: Valtra. Series: N5-Serie. Category: Support plates. Version: Standard. Thickness: 50 mm. Colour: AGCO grey. Width: 280 mm. D-value: 89,3... More
suitable for: Valtra. Series: N5-Serie. Category: Support plates. Vers...
€1.771,48 €1.464,03 €1.583,40 €1.308,60
You save 11%
AdBlue injection unit Valtra-Valmet, Fendt
€717,52 €592,99 €660,12 €545,55
You save 8%
Rear-view mirror 435 x 223 mm, left or right control Fendt
Dimensions: 435 x 223 mm. Version: Left or right control. Installation location: Right/left. Notes: Manual operation. More
Dimensions: 435 x 223 mm. Version: Left or right control. Installation...
€106,52 €88,03 €98,00 €80,99
You save 8%
Scharmüller Pick-Up Hitch einsätze 80 shank 70 x 80 mm, 445 mm, bore 30,5 mm
Scharmüller
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Overhang: 360 mm. Hole: 30,5 mm. ... More
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hi...
€1.465,37 €1.211,05
Starter ring gear Ø 405/373 mm, 133 teeth Valtra-Valmet
Version: Ø 405/373 mm, 133 teeth. More
Version: Ø 405/373 mm, 133 teeth.
€224,52 €185,55 €206,56 €170,71
You save 8%
AdBlue-filter Fendt, John Deere, Massey Ferguson
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no.: P956170. Fleetguard no.: UF101. Hifi no.: SD70380. Hengst no.: E103UD295. More
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no....
€59,17 €48,90 €54,44 €44,99
You save 8%
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.748,75 €1.445,25 €1.382,58 €1.142,63
You save 21%
Scharmüller Forced steering inner part left Ball 80 to K50 250 mm, 2 ton
Scharmüller
Assembly notes: Anticlockwise. Steering power: 2 t. Lock: K50. Description: Approved for steering forces up to 20 kN (2 t). Load capacity: 2 t. Load c... More
Assembly notes: Anticlockwise. Steering power: 2 t. Lock: K50. Descrip...
€481,06 €397,57 €453,50 €374,79
You save 6%
Walterscheid Adapter plate rail width 390 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 2800 kg. D-value: 89,3 kN. Central hole: 95 mm. Hole pattern: 160 x 100 m... More
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€1.150,89 €951,15 €909,90 €751,99
You save 21%
Rail pressure valve Valtra-Valmet N 104 - T 234, Massey Ferguson
€149,08 €123,21 €137,15 €113,35
You save 8%
Showing 1 - 48 of 51

Valtra N 104 parts with a focus on hitching

A Valtra N 104 spends plenty of its life pulling a tipping trailer, a bale cart or a slurry tanker. That is why a good share of the more than 50 parts on this page are for the rear of the tractor, alongside parts for cooling, hydraulics and the cab.

Hitching gear

For towing you will find drawbars with a ball, a ball hitch and screw-in ball adapters. For a pick-up hitch there are inserts and Piton Fix pins, and to mount it all there are adapter plates and support plates. Trailers with a self-steering axle are covered too, with parts for forced steering. Scharmüller and Walterscheid are among the makers here. A screw-in ball adapter turns an existing drawbar into a ball hitch, which is handy if you switch between trailers with a ring eye and ones with a ball cup. Recheck the nut after the first few loaded runs.

Look after the ball hitch

A ball hitch is meant to run greased. Left dry, the ball and the cup in the drawbar eye wear quickly, and you will hear it as a hard knock when pulling away and braking. Clean the ball regularly and apply a thin layer of grease. Measure it now and then as well, and if it has clearly worn out of round, fit a new one. With forced steering, also check the mountings of the steering rods, which take heavy loads on headland turns.

Cooling, lines and cab

  • Radiator hoses, including the bottom hose
  • Temperature sensors
  • A pressure pipe, a return line and seals for the pressure pipe
  • A rear-view mirror for the cab
  • A lockable fuel tank cap

Besides GRANIT, brands such as Wabco and BOSCH are represented.

Ordering for your N 104

The type plate confirms you have an N 104. For hitch parts, two more measurements matter, and you take them on the tractor itself: the rail width of the existing hitch mounting and the diameter of the locking pin. With those, you can pick the right adapter plate or Piton Fix. For hoses, sensors and pipes, look for a reference number on the part you removed.

The rest of the N series

The N 104 has siblings in the same series, and each one has its own page so you can see exactly what fits that tractor: Valtra N 134, Valtra N 154 and Valtra N 174. For older Valmet tractors and every other model, start at Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart