Menu
EUR

Valtra 8400 tractor parts & technical data

Also known as the Valmet 8400: for the Valtra 8400 this page lists more than 170 parts such as steering and front axle, electrics and trailer couplings.

157 parts found for Valtra-Valmet 8400
Show:
GRAMMER Tractor seat air suspended fabric, 480 mm, 12 V, MSG95G/721
GRAMMER
Comfort seat with air suspension and 12V compressor. Armrests, height adjustable and foldable. Weight adjustment, height adjustment 60 mm and Longitud... More
Comfort seat with air suspension and 12V compressor. Armrests, height ...
€1.051,50 €869,01
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 x 80 mm. Guide width: 30 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pat...
€638,19 €527,43
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Dipped beam, full beam. Dimensions W x H x D: 16... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€124,12 €102,58 €114,19 €94,37
You save 8%
DANA Spicer Plug front axle 745
€20,26 €16,75
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Scharmüller
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000 | Colour: AGCO grey | Guide width (mm): 30 | Rail width (mm): 335 | ... More
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€630,05 €520,70 €579,65 €479,05
You save 8%
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: consumer, 2: start, Installation dimension: Ø 16.5 mm, Without preheat... More
Version: 12 V, with 4 blade terminal connections, Switch positions: 0:...
€16,13 €13,33
Gear wheel main shaft 31 teeth Valtra-Valmet
Number of teeth: 31. More
Number of teeth: 31.
€423,24 €349,79 €389,38 €321,80
You save 8%
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: 12 V: 5-12 A, 24 V: 3-8 A, protection class: IP67, NC = normally close... More
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, powe...
€32,65 €26,98 €30,04 €24,82
You save 8%
VDO Coolant temperature sensor M14 x 1,5, +40 - +120 °C, 98 °C
VDO
Version: Temperature measuring range: +40°C to +120°C, Thread: M14 x 1.5, Resistance values: 287.4 - 22.7 ohm, Outlet: 1-pin via earth, Warning cont... More
Version: Temperature measuring range: +40°C to +120°C, Thread: M14 x...
€162,00 €133,88 €149,04 €123,17
You save 8%
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
Scharmüller
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version: Standard | Colour: AGCO grey | Load capacity (t): 3 | Length (mm): 4... More
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual...
€987,09 €815,78 €908,12 €750,51
You save 8%
Wiper motor Massey Ferguson, Valtra-Valmet
€223,30 €184,55 €205,44 €169,78
You save 8%
Filter dryer Ø 76 mm, 228 mm, connection thread M
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O-ring B = male thread 3/8"" - 18UNF Pressure switch thread: 1 3/8"" - 24 O-ring ... More
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O...
€63,79 €52,72 €58,69 €48,50
You save 8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Connection thread E: - More
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O...
€54,07 €44,69 €49,74 €41,11
You save 8%
LUK Clutch plate TZFA organic torsiegeveerd 41 x 45 mm, 22 splines
LUK
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Organic clutch lining More
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Organic...
€519,27 €429,15 €477,73 €394,82
You save 8%
DANA Spicer O-ring differential front axle 745, 2 g
Gear wheel planetary set rear axle 82 teeth Valtra-Valmet
€894,96 €739,64 €823,36 €680,47
You save 8%
Coupling sleeve transmission-input shaft Valtra-Valmet
€255,14 €210,86 €234,73 €193,99
You save 8%
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Cobo
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning light function. More
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard w...
€58,12 €48,03 €53,47 €44,19
You save 8%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.207,08 €997,59 €954,33 €788,70
You save 21%
FTE Clutch master cylinder Ø 25,4 mm, DOT4, gray cast iron Valtra-Valmet
FTE
Material: Grey cast iron | Hole Ø (mm): 25.4 | Medium: DOT4 | Additional information: With piston rod More
Material: Grey cast iron | Hole Ø (mm): 25.4 | Medium: DOT4 | Additio...
€209,23 €172,92 €192,49 €159,08
You save 8%
MAHLE Starter motor 12 V, 3,0 kW, 11 teeth, mounting Ø 89 mm, mounting angle r 45
€505,95 €418,14 €303,03 €250,44
You save 40%
Bosch/Rexroth Double pump 25 + 11 cm³/rpm., left, Valmet spline DIN 5480
Bosch/Rexroth
Output volume: 25 + 11 cc/rev. Drive shaft: Special Valmet splining DIN 5480. Direction of rotation: Anticlockwise. Bosch no.: 0510766313. More
Output volume: 25 + 11 cc/rev. Drive shaft: Special Valmet splining DI...
€1.342,35 €1.109,38 €1.234,96 €1.020,63
You save 8%
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€583,34 €482,10 €536,67 €443,53
You save 8%
MAHLE Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
MAHLE
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø (mm): - | Additional information: Compact alternator, dust-tight | Mounting L /... More
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø...
€388,90 €321,41 €232,93 €192,50
You save 40%
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
SANDEN
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connection: A2 | Nominal voltage (V): 12 | Pulley Ø (mm): 132 | Menke no.: 67... More
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a ...
€586,48 €484,69 €539,56 €445,92
You save 8%
LUK Clutch plate 350TZFV 41 x 45 x 22 mm, organic Valtra-Valmet
LUK
Material specifications: Organic clutch lining | Dimensions (mm): 41 x 45 x 22 More
Material specifications: Organic clutch lining | Dimensions (mm): 41 x...
€664,64 €549,29 €611,47 €505,35
You save 8%
Alternator 12 V / 65 A Challenger, JCB, Massey Ferguson, Valtra-Valmet
Installation angle (°): l 60 | Charging current (A): 65 | Additional information: Connections B+ (M6-6.3), with W-connection, internal regulator | Di... More
Installation angle (°): l 60 | Charging current (A): 65 | Additional ...
€256,15 €211,69 €235,66 €194,76
You save 8%
Radiator 5 rows 620 x 800 x 120 mm Valtra-Valmet 8350-8550
To fit as: Valtra-Valmet Series Hitech: 8350; Series Mega: 8400, 8450, 8550 More
To fit as: Valtra-Valmet Series Hitech: 8350; Series Mega: 8400, 8450,...
€3.471,68 €2.869,16 €3.243,95 €2.680,95
You save 7%
LUK Central release bearing 2 connections 45,5 x 95 x 105 mm
LUK
Dimensions (mm): 45.5 x 95 x 105 More
Dimensions (mm): 45.5 x 95 x 105
€486,06 €401,70 €447,18 €369,57
You save 8%
Clutch plate 330 WGSZX 41 x 45 mm, 22 splines Valtra-Valmet
Dimensions (mm): 41 x 45, 22 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 41 x 45, 22 grooves | Material specifications: Organi...
€406,29 €335,78 €373,79 €308,91
You save 8%
MAHLE Alternator 14 V, 65 A, pulley-Ø 80 mm, form A
MAHLE
Pulley Ø (mm): 80.0 | Charging current (A): 65 | Form: A | Pulley spacing (mm): 37,0 | Nominal values (V / A): 14 / 65 | Mounting L / d / R (mm): 82,... More
Pulley Ø (mm): 80.0 | Charging current (A): 65 | Form: A | Pulley spa...
€234,35 €193,68 €140,36 €116,00
You save 40%
Alternator 14 V, 120 A, flange 56 mm, Fendt, Valtra-Valmet
Pulley spacing (mm): - | Form: B | Additional information: Compact alternator, dust-tight | Belt tension hole Ø / R (mm): 8,3 / 86,0 | Nominal values... More
Pulley spacing (mm): - | Form: B | Additional information: Compact alt...
€275,46 €227,65 €253,42 €209,44
You save 8%
DANA Spicer O-ring differential front axle 755, 1 g
Master brake cylinder K1, DOT 4, Valtra-Valmet, Case IH
€137,83 €113,91 €126,80 €104,80
You save 8%
LUK Clutch plate TDCA sintered 41 x 45 mm, 22 splines Valtra-Valmet
LUK
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Sintere...
€520,71 €430,34 €479,05 €395,91
You save 8%
Ball head with female thread 23,5 - 26,5 mm, M22 x 1,5, 290 mm Valmet
E (mm): 23,5 | F (mm): 26,5 | A (mm): 290 | Taper (mm): 23,5 - 26,5 | D (mm): M22 x 1,5 | C (mm): M20 x 1,5 More
E (mm): 23,5 | F (mm): 26,5 | A (mm): 290 | Taper (mm): 23,5 - 26,5 | ...
€107,98 €89,24 €99,34 €82,10
You save 8%
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Scharmüller
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail width (mm): 200 | D-value (kN): 10 | Colour: Black | Detent pin Ø (mm): ... More
Version: Standard | Category: Bearing supports | Guide width (mm): 25 ...
€668,46 €552,45 €614,98 €508,25
You save 8%
PTO shaft end piece 1 3/8 inch, 6 splines Valtra-Valmet
Version: 1 3/8"", 6 grooves More
Version: 1 3/8"", 6 grooves
€206,82 €170,93 €190,27 €157,25
You save 8%
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
CARLISLE
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth More
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€17,19 €14,20
Clutch master cylinder Valtra-Valmet 6000 - 8750, N91, T120 - T171
€197,43 €163,17 €181,64 €150,11
You save 8%
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
DANA Spicer
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120 More
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€46,81 €38,69 €43,07 €35,59
You save 8%
DANA Spicer Intermediate bush as front axle 745, 120 x 127 x 40 mm
DANA Spicer
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40 | Outer Ø (mm): 127 More
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40...
€140,42 €116,05 €129,19 €106,77
You save 8%
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 254 mm, clockwise
€510,93 €422,26 €306,01 €252,90
You save 40%
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€77,66 €64,18 €71,45 €59,05
You save 8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 475, 484, 584, 674, 684, 784, 884 385, 485, 485XL, 585, 585XL, 685, 685... More
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 4...
€48,67 €40,22 €44,78 €37,01
You save 8%
Showing 1 - 48 of 157

Valtra 8400 parts, also known as the Valmet 8400

Plenty of farmers still call it the Valmet 8400, while other paperwork says Valtra. Either way it is the same tractor from the Mega range, and there are more than 170 parts for it on this page, from makers including GRANIT, Scharmüller, GRAMMER, Walterscheid and DANA Spicer.

Keeping the engine healthy

Under the bonnet you will find radiator hoses such as the top hose, thermostats with their gasket, alternators and seal kits. If the engine will not reach temperature in winter or runs hot under heavy load, the thermostat is often the first suspect. There are also stop cables for shutting the engine down, seals like the one for the feed pump, O-rings for the differential and repair kits.

Clutch, steering and the cab

  • A clutch plate made for the Valtra-Valmet
  • Ball joints for the steering
  • An air suspended tractor seat
  • Door locks and a flasher unit for the indicators
  • Ball type drawbars at the rear

The stop cable is one of those parts nobody thinks about until it snaps. If the engine is reluctant to shut off or the handle has to come out further each time, the inner cable is stretching or binding in its outer. Route a new one without tight bends and well away from the hot exhaust manifold, or the same story starts over again soon enough. A few drops of light oil down the outer keep it moving freely.

Thermostat check before you swap

You can test a thermostat in a pan of water on the stove with a thermometer beside it. It should start opening around its rated temperature and close again as the water cools. When refitting, always use a new gasket and, if there is a small bleed hole, put it at the top. Refill the cooling system slowly and let the engine warm up with the heater valve open so trapped air can escape, then check the level once more after the first run.

Valtra or Valmet, the number is what counts

Because the same tractor goes by two names, rely on the number on the type plate. If it says 8400, this is the right page. For a clutch plate, compare the diameter and the number of splines, and for a stop cable the length of the cable itself. If a reference number is still readable on the old part, use it as a check.

Within the Mega range these models each have their own page, useful when a second Valtra shares the yard: the Valtra 8050, the Valtra 8150 and the Valtra 8550. Other models from the brand, older Valmet tractors included, are under Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart