Menu
EUR

Valtra 800 tractor parts & technical data

Known as the Valmet 800 too, the Valtra 800 has more than 90 parts listed here, with trailer couplings, electrics and lighting among the groups.

94 parts found for Valtra-Valmet 800
Show:
GRANIT Ball joint 160 mm, C M20 x 1,5, D M22 x 1,5, taper 23,5 - 26,5 mm
GRANIT
A: 160 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. More
A: 160 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€97,24 €80,36 €92,35 €76,32
You save 5%
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Cobo
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning light function. More
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard w...
€55,70 €46,03 €52,90 €43,72
You save 5%
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Walterscheid
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg, from 40 km/h 2,000 kg. More
Quick height adjustment with rotation lock, load capacity up to 40 km/...
€2.124,41 €1.755,71 €1.669,15 €1.379,46
You save 21%
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: 12 V: 5-12 A, 24 V: 3-8 A, protection class: IP67, NC = normally close... More
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, powe...
€39,10 €32,31
GRANIT LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
GRANIT
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€78,15 €64,59 €70,70 €58,43
You save 10%
DANA Spicer Wheel bolt M18 x 1,5, 60 mm final drive front axle 730
DANA Spicer
Length (mm): 60 | Thread: M18 X 1,5 More
Length (mm): 60 | Thread: M18 X 1,5
€15,55 €12,85
Axial joint 205 mm, M22 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
A: 205 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm. More
A: 205 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm.
€78,20 €64,63 €74,25 €61,36
You save 5%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€586,12 €484,40 €556,80 €460,17
You save 5%
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Colour: Black. Description: This product is a b... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.166,20 €1.790,25 €1.702,00 €1.406,61
You save 21%
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF. More
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€32,40 €26,78
Inlet valve engine Sisu 320-620
€36,60 €30,25 €34,75 €28,72
You save 5%
GRANIT Oil drain valve M18 x 1,5
GRANIT
Thread: M18 x 1.5. More
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
You save 5%
Door lock, left Massey Ferguson, Case IH, Steyr
€47,50 €39,26 €45,10 €37,27
You save 5%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.214,60 €1.003,80 €954,30 €788,68
You save 21%
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 254 mm, clockwise
€489,63 €404,65 €306,00 €252,89
You save 38%
GRANIT Bolt set 1ste steering valve 3x M8 x 90
GRANIT
Technical data: 3x M8 x 90. More
Technical data: 3x M8 x 90.
€17,60 €14,55
GRANIT Bolt set 2de steering valve 3x M8 x 130
GRANIT
Technical data: 3x M8 x 130. Description: For 1st Control unit. More
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€14,95 €12,36
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.675,85 €1.385,00 €1.382,55 €1.142,60
You save 18%
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
SANDEN
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connection: A2 | Nominal voltage (V): 12 | Pulley Ø (mm): 132 | Menke no.: 67... More
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a ...
€562,03 €464,49 €533,90 €441,24
You save 5%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€36,87 €30,47 €35,00 €28,93
You save 5%
Crankshaft seal for Ø 58 x 80 x 12 mm Massey Ferguson
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm. More
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm.
€14,80 €12,23
Door lock, right Fendt Farmer 240 S (Typ 294), GT 395
€54,33 €44,90 €51,60 €42,64
You save 5%
BOSCH Sensor hydraulic pressure lifting height
BOSCH
Version: Lifting height. More
Version: Lifting height.
€355,33 €293,66 €314,26 €259,72
You save 12%
Showing 1 - 24 of 94

Valtra 800 parts, also sold as the Valmet 800

The Valtra 800 is also known as the Valmet 800, so whichever badge your tractor wears, the parts on this page apply. There are more than 90 of them, from GRANIT and from makers such as DANA Spicer, Walterscheid, MAHLE and Cobo.

Turbo and engine

Valtra 800 parts for the engine include remanufactured turbochargers, exhaust manifold seals at the turbo, valve cover gaskets and seal sets, crankshaft seals and connecting rod bolts. O-rings for the feed pump take care of the fuel side.

A replacement turbo will fail just as quickly if the cause of the first failure is still there. Replace oil feed and return lines that are dirty or dented, change the oil and filter, and prime the turbo with clean oil before the first start. Let the engine idle for a while before putting it under load.

Steering, cab, lights

  • Ball joints for the track rods, in left and right versions
  • Bolt sets for the steering valve
  • Door locks for the cab
  • Aircon compressors
  • Work lamps, indicator and position lights and flasher units
  • Drawbars with ball for hitching

If the indicators suddenly flash twice as fast, a bulb has usually blown. Check every lamp before you blame the flasher unit.

Steering play and the cab door

Play in the steering shows on the road as a tractor that wanders. Have someone rock the steering wheel while you watch the front wheels. If a ball joint moves in its housing before the wheel follows, it is worn. Reset the toe-in after fitting a new joint, or the front tyre will wear on one edge. When fitting the steering valve bolt set, tighten the bolts evenly in a cross pattern so the valve seats squarely.

A stiff cab door lock often needs cleaning and a dry lubricant first. Only when the latch no longer catches is a new lock the answer.

Making sure it fits

The type plate gives the model designation even if the tractor has always been called a Valmet on the farm. For ball joints, check left or right and the taper. For door locks, check which side of the cab the door is on. For engine parts, look for the reference number on the part you are removing and compare it with the details given here.

Neighbouring models

Two closely related tractors have their own page: the Valtra 700 and the Valtra 900. Each lists the parts for that model. For the rest of the range, go to Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart