Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Valtra 805 tractor parts & technical data

Whether you call it Valtra 805 or Valmet 805, this page lists more than 60 parts for it, such as steering and front axle components, electrics and lighting.

62 parts found for Valtra-Valmet 805
Show:
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Dipped beam, full beam. Dimensions W x H x D: 16... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€124,12 €102,58 €114,19 €94,37
You save 8%
VDO Coolant temperature sensor M14 x 1,5, +40 - +120 °C, 98 °C
VDO
Version: Temperature measuring range: +40°C to +120°C, Thread: M14 x 1.5, Resistance values: 287.4 - 22.7 ohm, Outlet: 1-pin via earth, Warning cont... More
Version: Temperature measuring range: +40°C to +120°C, Thread: M14 x...
€162,00 €133,88 €149,04 €123,17
You save 8%
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Cobo
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning light function. More
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard w...
€58,12 €48,03 €53,47 €44,19
You save 8%
Feed pump 3 hole, 50 x 34 mm, roller 23 mm Mercedes Benz, Valtra-Valmet
Version: 3 holes, Vertical hole spacing: 50 mm, Horizontal hole spacing: 34 mm, Flange to roller end: 23 mm. More
Version: 3 holes, Vertical hole spacing: 50 mm, Horizontal hole spacin...
€45,33 €37,46 €41,70 €34,47
You save 8%
LUK Thrust bearing driving clutch 60 x 97 x 26 Fendt, Landini, Valtra-Valmet
LUK
Dimensions (mm): 60 x 97 x 26 More
Dimensions (mm): 60 x 97 x 26
€121,34 €100,28 €111,63 €92,26
You save 8%
MAHLE Alternator 14 V, 65 A, pulley-Ø 80 mm, form A
MAHLE
Pulley Ø (mm): 80.0 | Charging current (A): 65 | Form: A | Pulley spacing (mm): 37,0 | Nominal values (V / A): 14 / 65 | Mounting L / d / R (mm): 82,... More
Pulley Ø (mm): 80.0 | Charging current (A): 65 | Form: A | Pulley spa...
€234,35 €193,68 €140,36 €116,00
You save 40%
MAHLE Starter motor 12 V, 3,0 kW, 11 teeth, mounting Ø 89 mm, mounting angle r 45
€505,95 €418,14 €303,03 €250,44
You save 40%
Starter motor with reduction 12 V, 2,7 kW, 11 teeth, 193 mm, Ø 89 mm
€247,59 €204,62 €227,78 €188,25
You save 8%
Starter motor 12 V, 3,0 kW, 11 teeth, 229,5 mm, Ø 89 mm
€315,38 €260,64 €290,15 €239,79
You save 8%
Master brake cylinder K1, DOT 4, Valtra-Valmet, Case IH
€137,83 €113,91 €126,80 €104,80
You save 8%
Alternator 14 V / 65 A, form A, flange 86,0 mm, pulley-Ø 90,0 mm
To fit as: Ford, Lindner, Valtra-Valmet More
To fit as: Ford, Lindner, Valtra-Valmet
€239,13 €197,63 €220,00 €181,82
You save 8%
Hydraulic pump double 22,5 + 12 cm³ Valtra-Valmet 505 - 905
Output volume (cc/rev): 22,5 + 12 More
Output volume (cc/rev): 22,5 + 12
€837,13 €691,84 €770,16 €636,50
You save 8%
Alternator 14 V / 65 A, flange 86 mm, pulley Ø 90 mm
Flange size (mm): 86,0 | Belt tension hole Ø / R (mm): M8 / 86,0 | Mounting L / d / R (mm): 86,0 / 8,2 / 86,0 | Additional information: With combinat... More
Flange size (mm): 86,0 | Belt tension hole Ø / R (mm): M8 / 86,0 | Mo...
€152,63 €126,14 €140,42 €116,05
You save 8%
Radiator Valtra-Valmet 505-855, engine Sisu 311, 411
To fit as: Valtra-Valmet Engine Sisu: 311, 411; Series 05: 505, 605, 705, 805; Series 600: 615; Series Valmet: 655, 715, 755, 815, 855 More
To fit as: Valtra-Valmet Engine Sisu: 311, 411; Series 05: 505, 605, 7...
€581,76 €480,79 €535,22 €442,33
You save 8%
Radiator hose, top inner-Ø 40 mm Valtra-Valmet Mezzo 6000-6800
€51,59 €42,64 €47,46 €39,23
You save 8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 475, 484, 584, 674, 684, 784, 884 385, 485, 485XL, 585, 585XL, 685, 685... More
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 4...
€48,67 €40,22 €44,78 €37,01
You save 8%
Ball joint taper 16,2 - 18,3 mm, length 100 mm, M14 x 1,5, M22 x 1,5 L
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 L mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2 - 18,3 mm. More
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 L mm. E: 16,2 mm. F: 18,3 mm....
€71,69 €59,25 €65,95 €54,51
You save 8%
Ball joint taper 20 - 22,2 mm, M18 x 1,5, M24 x 1,5 L, 106 mm
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 L mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 22,2 mm. More
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 L mm. E: 20 mm. F: 22,2 mm. T...
€60,06 €49,64 €55,26 €45,67
You save 8%
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF. More
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€33,85 €27,98
Inlet valve engine Sisu 311-611 Valtra-Valmet
€113,89 €94,12 €104,78 €86,59
You save 8%
Valve Valtra-Valmet 355-1203
€99,04 €81,85 €91,12 €75,30
You save 8%
Cylinder head gasket Valtra-Valmet 705, 805, 865
€71,47 €59,07 €65,75 €54,34
You save 8%
Injection nozzle Valtra-Valmet 205-855
Type formula: DLLA150S804, 0433271856. More
Type formula: DLLA150S804, 0433271856.
€40,77 €33,69 €37,51 €31,00
You save 8%
Stop cable 2015 / 2250 mm Valtra-Valmet 205-905, 6000-8750
To fit as: Valtra - Valmet 205, 305, 365, 405, 465, 505, 600, 605, 665, 700, 705, 805, 865, 900, 905, 6000, 6100, 6300, 6400, 6600, 6800, 8000, 8100, ... More
To fit as: Valtra - Valmet 205, 305, 365, 405, 465, 505, 600, 605, 665...
€34,18 €28,24
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€548,46 €453,27 €328,50 €271,49
You save 40%
Ball joint right and left M16 x 1,5, M24 x 1,5, taper 18 - 20 mm
A: 105 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18 mm. F: 20 mm. Taper: 18 - 20 mm. More
A: 105 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18 mm. F: 20 mm. Taper...
€39,87 €32,95 €36,68 €30,31
You save 8%
Ball joint 522 mm, M16 x 1,5, 22 mm
A: 522 mm. C: M16 x 1,5 mm. D: 22 mm. E: 18 mm. F: 20,2 mm. Taper: 18 - 20,2 mm. More
A: 522 mm. C: M16 x 1,5 mm. D: 22 mm. E: 18 mm. F: 20,2 mm. Taper: 18 ...
€69,02 €57,04 €63,50 €52,48
You save 8%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€38,47 €31,79 €35,39 €29,25
You save 8%
Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: white. Connection: Blade terminal... More
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 ...
€27,39 €22,63
Repair set clutch cylinder Valtra-Valmet, Steyr
€54,42 €44,98 €50,07 €41,38
You save 8%
Repair set brake cylinder Valtra-Valmet, Fendt
€39,37 €32,54 €36,22 €29,93
You save 8%
Feed pump 3 hole, hole spacing 52 x 34 mm, flange 23 mm
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, Flange to lever end: 23 mm. More
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacin...
€121,09 €100,07 €111,40 €92,07
You save 8%
O-clamp set 115 x 3,5 mm Steyr, Massey Ferguson - 3 pieces
Dimensions: All rings 115 x 3.5 mm. More
Dimensions: All rings 115 x 3.5 mm.
€35,00 €28,93 €32,20 €26,61
You save 8%
HELLA Headlight left / right 12 / 24 V, H4, glass 164 x 103 mm, built-in Fendt
HELLA
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK / T4W. Fixing: 3-point mounting. Installation location: Left/right. Nominal voltage: 12 / 2... More
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK / T4W. Fixi...
€107,20 €88,60 €103,23 €85,32
You save 4%
Ball joint 100 mm, taper 16,2 - 18,3 mm, M14 x 1,5, M22 x 1,5
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2 - 18,3 mm. More
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 mm. E: 16,2 mm. F: 18,3 mm. T...
€71,69 €59,25 €65,95 €54,51
You save 8%
Ball joint 205 mm, M20 x 1,5, M22 x 1,5, taper 23,5 - 26,2 mm
A: 205 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,2 mm. Taper: 23,5 - 26,2 mm. More
A: 205 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,2 mm. T...
€73,47 €60,72 €67,59 €55,86
You save 8%
Axial joint 205 mm, M22 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
A: 205 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm. More
A: 205 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm.
€81,60 €67,44 €75,07 €62,04
You save 8%
Ball joint 220 mm, M22 x 1,5, M22 x 1,5, taper 23,5 - 26,4 mm
A: 220 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,4 mm. Taper: 23,5 - 26,4 mm. More
A: 220 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,4 mm. T...
€82,92 €68,53 €76,29 €63,05
You save 8%
Wheel brake cylinder Ø 34,92 mm, DOT 4, with piston rod Steyr 667, 680
Medium: DOT4. Hole Ø: 34.92 mm. Additional information: With piston rod. More
Medium: DOT4. Hole Ø: 34.92 mm. Additional information: With piston r...
€179,36 €148,23 €165,01 €136,37
You save 8%
Wheel brake cylinder K1, DOT 4 Valtra-Valmet Mezzo 6000-6900
€183,75 €151,86 €169,05 €139,71
You save 8%
Brake disc Ø 224 mm, 27 teeth, thickness 5 mm, 50 km/h, for ceramic
Notes: Please check the rear axle version and take this into account when ordering.. More
Notes: Please check the rear axle version and take this into account w...
€40,13 €33,16
Starter ring gear Ø 405/373 mm, 133 teeth Valtra-Valmet
Version: Ø 405/373 mm, 133 teeth. More
Version: Ø 405/373 mm, 133 teeth.
€224,52 €185,55 €206,56 €170,71
You save 8%
Water pump with seal Valtra-Valmet 505-815
€263,60 €217,85 €242,51 €200,42
You save 8%
Radiator hose, bottom inner-Ø 40 / 41 mm Valtra-Valmet
Inner Ø: 40 / 41 mm. More
Inner Ø: 40 / 41 mm.
€56,02 €46,30 €51,54 €42,59
You save 8%
Showing 1 - 48 of 62

Valtra 805 parts for brakes, cooling and starting

Badged Valtra 805 or Valmet 805, this tractor tends to need attention at the brakes, the cooling hoses and the starting system. This page has more than 60 parts that fit it, from GRANIT, MAHLE, VDO, Cobo and HELLA.

Brakes

There are wheel brake cylinders and repair sets for the brake cylinder. A repair set with new cups and dust boots makes sense while the cylinder bore is still smooth. If you find rust or scoring inside, fit a complete wheel brake cylinder instead. Always do both sides together so the tractor does not pull under hard braking, then bleed the system until clear fluid with no bubbles comes through.

Cooling and engine

  • radiator hoses, including the top hose
  • a VDO coolant temperature sender
  • crankshaft seals, such as the rear seal
  • feed pumps and the seal for the feed pump
  • stop cables for shutting the engine down

A leaking rear crankshaft seal shows up as oil between the engine and the clutch housing. Since the tractor has to be split to reach it, it makes sense to renew the seal whenever the clutch is out. Make sure the running surface on the crankshaft is clean and undamaged, and press the new seal in square. A temperature sender that reads low can make you believe all is well while the engine is overheating. If in doubt, check with an infrared thermometer at the top radiator hose.

Starting, lighting and steering

On the electrical side there are starter motors, alternators, connection cables and a flasher unit. Up front, headlights fit, including a HELLA LED headlight. If the starter turns slowly even with a fully charged battery, look at the heavy cables and the earth connection before ordering a new starter. Ball joints keep the track rod and drag link of the 805 tight and without play.

Feed pumps come with a different number of holes in the flange, so count them on the old pump before ordering. A stiff stop cable usually frees up with a little thin oil, but a frayed one should be replaced straight away.

Finding the matching part

The type plate shows which name your 805 carries. Old starters, alternators and brake cylinders often have a stamped number you can compare with the product details. For ball joints, measure the length and check whether the thread is left or right hand.

The 805 is part of a family whose model numbers end in 05, and its siblings have pages of their own:

Other Valtra and Valmet tractors are reached through Valtra parts.

Brands
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart