Menu
EUR

Valtra T 234 tractor parts & technical data

More than 50 parts for the Valtra T 234 in the T4 series on one page. Find trailer couplings, electrics and the brake and transmission parts for this model.

58 parts found for Valtra-Valmet T 234
Show:
Wabco Solenoid valve 3/2-way, 12 V, 1,41 A, M16 x 1,5, standard closed
Wabco
Eligible: Environmental protection and safety (formerly de minimis) More
Eligible: Environmental protection and safety (formerly de minimis)
€408,59 €337,68 €375,90 €310,66
You save 8%
Wabco Electrically controlled air dryer M22 x 1,5, cartridge M39, 13 bar
€412,20 €340,66 €379,22 €313,41
You save 8%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€630,05 €520,70 €579,65 €479,05
You save 8%
BOSCH Fuel pre-filter line filter D 37 mm, H 105 mm, connection 6 mm
BOSCH
C (mm): 35 | F: 6 | D (mm): 37 | H (mm): 105 | Height (mm): 105 | Version: Leitungsfilter | G (mm): 6 | Additional information: Typformel: F4058 | Ø ... More
C (mm): 35 | F: 6 | D (mm): 37 | H (mm): 105 | Height (mm): 105 | Vers...
€3,99 €3,30
SACHS Shock absorber rear, air spring PSE36/20X71A2ED Valtra-Valmet
SACHS
To fit: Valtra | System: Air suspension bellows and shock absorber make a complete air spring | Dimensions (mm): PSE36/20X71A2ED | Installation locati... More
To fit: Valtra | System: Air suspension bellows and shock absorber mak...
€1.483,26 €1.225,83 €1.364,60 €1.127,77
You save 8%
NOX sensor Massey Ferguson, Valtra-Valmet, Fendt
To fit: Massey Ferguson, Valtra-Valmet, Fendt. More
To fit: Massey Ferguson, Valtra-Valmet, Fendt.
€453,61 €374,88 €417,32 €344,89
You save 8%
MASSEY FERGUSON Waterpompset Valtra-Valmet T144-T254, Massey Ferguson 7614-7726
MASSEY FERGUSON
Reference no.: ACP055583C, ACP055583B, ACP055583A, V837091197, V837091112. More
Reference no.: ACP055583C, ACP055583B, ACP055583A, V837091197, V837091...
€954,01 €788,44
Walterscheid Inner part ball 80 rail width 390 mm, pin Ø 25 mm, 4000 kg
Walterscheid
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value (kN): 102 | Detent pin Ø (mm): 25 | Rail width (mm): 390 | Description: This pr... More
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value ...
€2.263,90 €1.870,99 €1.789,86 €1.479,23
You save 21%
Walterscheid Piton Fix rail width 390 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.781,58 €1.472,38 €1.408,53 €1.164,08
You save 21%
Scharmüller Forced steering 80 Pick-Up Hitch einsätze K50, 2 ton, 101 mm
Scharmüller
Assembly notes: Both ends. Lock: K50. Steering power: 2 t. Internal width: 101 mm. Colour: Black. Description: Approved for steering forces up to 20 k... More
Assembly notes: Both ends. Lock: K50. Steering power: 2 t. Internal wi...
€1.031,70 €852,64 €977,51 €807,86
You save 5%
Walterscheid Drawbar ball 80 automatic, rail 390 mm, pin Ø 25 mm, 2000/2800 kg
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 2000 / 2800 kg. Colour: black. Description: This product is a ball hitch.... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.277,79 €1.882,47 €1.850,84 €1.529,62
You save 19%
Scharmüller Schroefkogeladapter K80 D 118 kN, nose weight 3000 kg, M16 / M20
Scharmüller
Category: Components and special solutions | Lock: ball 80 | Hole (mm): M16 / M20 | Description: Compatible with JD drawbar Cat. 4 (ex works) | V-valu... More
Category: Components and special solutions | Lock: ball 80 | Hole (mm)...
€1.926,92 €1.592,50 €1.772,77 €1.465,10
You save 8%
Scharmüller Schroefkogeladapter K80 3000 kg, 118 kN, bore M16 / M20, black
Scharmüller
V-value (kN): 83 | Hole (mm): M16 / M20 | Version: Threaded ball adapter K80 | Description: Suitable for Scharmüller drawbar part no. 10.820.9270.0 |... More
V-value (kN): 83 | Hole (mm): M16 / M20 | Version: Threaded ball adapt...
€1.926,92 €1.592,50 €1.822,77 €1.506,42
You save 5%
Scharmüller Schroefkogeladapter K80 3000 kg, 118 kN, bore M16, thread M20, black
Scharmüller
D-value (kN): 118 | Thread: M20 | Hole (mm): M16 | Load capacity (kg): 3000 | Lock: ball 80 | Colour: Black | Description: Compatible with CNH drawbar... More
D-value (kN): 118 | Thread: M20 | Hole (mm): M16 | Load capacity (kg):...
€1.926,92 €1.592,50 €1.822,77 €1.506,42
You save 5%
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 4,86 kg
Scharmüller
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Conn... More
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: An...
€481,06 €397,57 €453,50 €374,79
You save 6%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 175 mm. Colour: Black. Overhang... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
Temperature sensor exhaust aftertreatment
€233,28 €192,79 €214,62 €177,37
You save 8%
Differential pressure sensor Massey Ferguson, Valtra-Valmet, Fendt
€176,91 €146,21 €169,54 €140,11
You save 4%
Rail pressure sensor Valtra-Valmet, Fendt, Massey Ferguson
€295,33 €244,07 €271,70 €224,55
You save 8%
BOSCH Pressure regulator CP4 Valtra-Valmet, Fendt, Massey Ferguson
€184,72 €152,66 €156,56 €129,39
You save 15%
Rail pressure sensor Fendt 5255L-9470X, Massey Ferguson Series 5600-9530
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 170 mm. Colour: Black. Overhang... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
NOX sensor Massey Ferguson, Challenger, Valtra-Valmet
€874,29 €722,55 €804,35 €664,75
You save 8%
Tank cap engine cooling
€46,16 €38,15 €42,47 €35,10
You save 8%
Signal transmitter exhaust aftertreatment Valtra-Valmet T 144 - T 254
€633,59 €523,63 €582,90 €481,74
You save 8%
AdBlue-feed unit Valtra-Valmet A84-A134
Description: AdBlue supply units ensure even metering of AdBlue depending on the load on the common rail engine. It is important that only filtered ur... More
Description: AdBlue supply units ensure even metering of AdBlue depend...
€1.047,79 €865,94 €963,97 €796,67
You save 8%
Rear-view mirror 435 x 223 mm, left or right control Fendt
Dimensions: 435 x 223 mm. Version: Left or right control. Installation location: Right/left. Notes: Manual operation. More
Dimensions: 435 x 223 mm. Version: Left or right control. Installation...
€106,52 €88,03 €98,00 €80,99
You save 8%
Temperature sensor Fendt, Massey Ferguson, Valtra-Valmet
€94,76 €78,31 €87,18 €72,05
You save 8%
Radiator hose, top Valtra-Valmet T 144 - T 254
€58,78 €48,58 €54,08 €44,69
You save 8%
Scharmüller Pick-Up Hitch einsätze 80 shank 70 x 80 mm, 445 mm, bore 30,5 mm
Scharmüller
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Overhang: 360 mm. Hole: 30,5 mm. ... More
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hi...
€1.465,37 €1.211,05
AdBlue-filter Fendt, John Deere, Massey Ferguson
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no.: P956170. Fleetguard no.: UF101. Hifi no.: SD70380. Hengst no.: E103UD295. More
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no....
€59,17 €48,90 €54,44 €44,99
You save 8%
Tensioning pulley Ø 74 / 46,3 mm, PK12
€46,78 €38,66 €43,04 €35,57
You save 8%
Belt tensioner Ø 75 mm, width 46,5 mm Fendt, Massey Ferguson
Outer Ø: 75 mm. Width: 46,5 mm. More
Outer Ø: 75 mm. Width: 46,5 mm.
€135,96 €112,36 €125,08 €103,37
You save 8%
Showing 1 - 48 of 58

Valtra T 234 parts for cooling, engine sensors and hitching

On the Valtra T 234, cooling problems usually show up on the temperature gauge first, long before anything else. This page lists more than 50 replacement parts for this T4 series tractor, made by GRANIT and by brands such as Scharmüller, Walterscheid, BOSCH and Wabco.

Thermostat and hoses

A thermostat that sticks or a radiator hose gone soft are typical reasons to open the cooling circuit. Whenever you fit a new thermostat, put a new seal in the housing and check every hose while you are there. A hose that crackles when squeezed, or feels spongy, is finished. Top up the coolant slowly afterwards and let the engine run with the expansion tank cap off until no more bubbles rise. An air pocket around the temperature sensor will otherwise give false readings on the dash.

What else is on this page

Besides thermostats, temperature sensors and radiator hoses, including the top hose, there is a rail pressure sensor and a NOX sensor for the engine management and exhaust side. For the belt drive there is a belt tensioner, and for the pipework a seal for the pressure pipe. At the rear you will find a drawbar, a Pick-Up Hitch, a Piton Fix, Schroefkogeladapter ball adapters, support plates, an adapter plate and forced steering inserts for trailers that steer with the tractor. A lockable fuel filler cap completes the list.

Making sure it fits your T 234

Check the type plate first to confirm the model. Next, take a close look at the component you have just removed from the tractor. Sensors and hoses often carry a printed or moulded reference number that you can compare with the product description. With sensors, also compare the thread and the connector shape, and with a thermostat look at the diameter and opening temperature stamped on the old unit.

Rail pressure and NOX sensors

Change a rail pressure sensor or NOX sensor with the engine cold. Blow the area around the sensor clean with compressed air first, so no dirt drops into the fuel rail or the exhaust passage as it comes out. Check the plug for green corrosion and broken locking tabs, and push it home until it clicks after fitting. A loose or corroded plug throws exactly the same fault code as a failed sensor, and you end up replacing a good part for nothing.

Related models in the T4 series

The Valtra T 144, Valtra T 154, Valtra T 174, Valtra T 194 and Valtra T 214 each have their own page showing the parts listed for that model. That is useful when you run several Valtra tractors and want to order per machine. Every model of the brand is grouped under Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart