Menu
EUR

Valtra T 174 tractor parts & technical data

Looking for Valtra T 174 parts from the T4 series? Here are more than 50 matching items, covering trailer couplings, electrics, brakes and transmission.

54 parts found for Valtra-Valmet T 174
Show:
Wabco Solenoid valve 3/2-way, 12 V, 1,41 A, M16 x 1,5, standard closed
Wabco
Eligible: Environmental protection and safety (formerly de minimis) More
Eligible: Environmental protection and safety (formerly de minimis)
€408,59 €337,68 €375,90 €310,66
You save 8%
Wabco Electrically controlled air dryer M22 x 1,5, cartridge M39, 13 bar
€412,20 €340,66 €379,22 €313,41
You save 8%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€630,05 €520,70 €579,65 €479,05
You save 8%
BOSCH Fuel pre-filter line filter D 37 mm, H 105 mm, connection 6 mm
BOSCH
C (mm): 35 | F: 6 | D (mm): 37 | H (mm): 105 | Height (mm): 105 | Version: Leitungsfilter | G (mm): 6 | Additional information: Typformel: F4058 | Ø ... More
C (mm): 35 | F: 6 | D (mm): 37 | H (mm): 105 | Height (mm): 105 | Vers...
€3,99 €3,30
SACHS Shock absorber rear, air spring PSE36/20X71A2ED Valtra-Valmet
SACHS
To fit: Valtra | System: Air suspension bellows and shock absorber make a complete air spring | Dimensions (mm): PSE36/20X71A2ED | Installation locati... More
To fit: Valtra | System: Air suspension bellows and shock absorber mak...
€1.483,26 €1.225,83 €1.364,60 €1.127,77
You save 8%
NOX sensor Massey Ferguson, Valtra-Valmet, Fendt
To fit: Massey Ferguson, Valtra-Valmet, Fendt. More
To fit: Massey Ferguson, Valtra-Valmet, Fendt.
€453,61 €374,88 €417,32 €344,89
You save 8%
MASSEY FERGUSON Waterpompset Valtra-Valmet T144-T254, Massey Ferguson 7614-7726
MASSEY FERGUSON
Reference no.: ACP055583C, ACP055583B, ACP055583A, V837091197, V837091112. More
Reference no.: ACP055583C, ACP055583B, ACP055583A, V837091197, V837091...
€954,01 €788,44
Walterscheid Inner part ball 80 rail width 390 mm, pin Ø 25 mm, 4000 kg
Walterscheid
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value (kN): 102 | Detent pin Ø (mm): 25 | Rail width (mm): 390 | Description: This pr... More
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value ...
€2.263,90 €1.870,99 €1.789,86 €1.479,23
You save 21%
Walterscheid Piton Fix rail width 390 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.781,58 €1.472,38 €1.408,53 €1.164,08
You save 21%
Scharmüller Forced steering 80 Pick-Up Hitch einsätze K50, 2 ton, 101 mm
Scharmüller
Assembly notes: Both ends. Lock: K50. Steering power: 2 t. Internal width: 101 mm. Colour: Black. Description: Approved for steering forces up to 20 k... More
Assembly notes: Both ends. Lock: K50. Steering power: 2 t. Internal wi...
€1.031,70 €852,64 €977,51 €807,86
You save 5%
Walterscheid Drawbar ball 80 automatic, rail 390 mm, pin Ø 25 mm, 2000/2800 kg
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 2000 / 2800 kg. Colour: black. Description: This product is a ball hitch.... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.277,79 €1.882,47 €1.850,84 €1.529,62
You save 19%
Scharmüller Schroefkogeladapter K80 D 118 kN, nose weight 3000 kg, M16 / M20
Scharmüller
Category: Components and special solutions | Lock: ball 80 | Hole (mm): M16 / M20 | Description: Compatible with JD drawbar Cat. 4 (ex works) | V-valu... More
Category: Components and special solutions | Lock: ball 80 | Hole (mm)...
€1.926,92 €1.592,50 €1.772,77 €1.465,10
You save 8%
Scharmüller Schroefkogeladapter K80 3000 kg, 118 kN, bore M16 / M20, black
Scharmüller
V-value (kN): 83 | Hole (mm): M16 / M20 | Version: Threaded ball adapter K80 | Description: Suitable for Scharmüller drawbar part no. 10.820.9270.0 |... More
V-value (kN): 83 | Hole (mm): M16 / M20 | Version: Threaded ball adapt...
€1.926,92 €1.592,50 €1.822,77 €1.506,42
You save 5%
Scharmüller Schroefkogeladapter K80 3000 kg, 118 kN, bore M16, thread M20, black
Scharmüller
D-value (kN): 118 | Thread: M20 | Hole (mm): M16 | Load capacity (kg): 3000 | Lock: ball 80 | Colour: Black | Description: Compatible with CNH drawbar... More
D-value (kN): 118 | Thread: M20 | Hole (mm): M16 | Load capacity (kg):...
€1.926,92 €1.592,50 €1.822,77 €1.506,42
You save 5%
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 4,86 kg
Scharmüller
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Conn... More
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: An...
€481,06 €397,57 €453,50 €374,79
You save 6%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 175 mm. Colour: Black. Overhang... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
Temperature sensor exhaust aftertreatment
€233,28 €192,79 €214,62 €177,37
You save 8%
Differential pressure sensor Massey Ferguson, Valtra-Valmet, Fendt
€176,91 €146,21 €169,54 €140,11
You save 4%
Rail pressure sensor Valtra-Valmet, Fendt, Massey Ferguson
€295,33 €244,07 €271,70 €224,55
You save 8%
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 170 mm. Colour: Black. Overhang... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
NOX sensor Massey Ferguson, Challenger, Valtra-Valmet
€874,29 €722,55 €804,35 €664,75
You save 8%
Tank cap engine cooling
€46,16 €38,15 €42,47 €35,10
You save 8%
Signal transmitter exhaust aftertreatment Valtra-Valmet T 144 - T 254
€633,59 €523,63 €582,90 €481,74
You save 8%
AdBlue-feed unit Valtra-Valmet A84-A134
Description: AdBlue supply units ensure even metering of AdBlue depending on the load on the common rail engine. It is important that only filtered ur... More
Description: AdBlue supply units ensure even metering of AdBlue depend...
€1.047,79 €865,94 €963,97 €796,67
You save 8%
Rear-view mirror 435 x 223 mm, left or right control Fendt
Dimensions: 435 x 223 mm. Version: Left or right control. Installation location: Right/left. Notes: Manual operation. More
Dimensions: 435 x 223 mm. Version: Left or right control. Installation...
€106,52 €88,03 €98,00 €80,99
You save 8%
Temperature sensor Fendt, Massey Ferguson, Valtra-Valmet
€94,76 €78,31 €87,18 €72,05
You save 8%
Radiator hose, top Valtra-Valmet T 144 - T 254
€58,78 €48,58 €54,08 €44,69
You save 8%
Scharmüller Pick-Up Hitch einsätze 80 shank 70 x 80 mm, 445 mm, bore 30,5 mm
Scharmüller
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Overhang: 360 mm. Hole: 30,5 mm. ... More
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hi...
€1.465,37 €1.211,05
AdBlue-filter Fendt, John Deere, Massey Ferguson
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no.: P956170. Fleetguard no.: UF101. Hifi no.: SD70380. Hengst no.: E103UD295. More
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no....
€59,17 €48,90 €54,44 €44,99
You save 8%
Tensioning pulley Ø 74 / 46,3 mm, PK12
€46,78 €38,66 €43,04 €35,57
You save 8%
Belt tensioner Ø 75 mm, width 46,5 mm Fendt, Massey Ferguson
Outer Ø: 75 mm. Width: 46,5 mm. More
Outer Ø: 75 mm. Width: 46,5 mm.
€135,96 €112,36 €125,08 €103,37
You save 8%
AdBlue injection unit Valtra-Valmet, Fendt
€717,52 €592,99 €660,12 €545,55
You save 8%
Scharmüller Forced steering inner part left Ball 80 to K50 250 mm, 2 ton
Scharmüller
Assembly notes: Anticlockwise. Steering power: 2 t. Lock: K50. Description: Approved for steering forces up to 20 kN (2 t). Load capacity: 2 t. Load c... More
Assembly notes: Anticlockwise. Steering power: 2 t. Lock: K50. Descrip...
€481,06 €397,57 €453,50 €374,79
You save 6%
Walterscheid Adapter plate rail width 390 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 2800 kg. D-value: 89,3 kN. Central hole: 95 mm. Hole pattern: 160 x 100 m... More
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€1.150,89 €951,15 €909,90 €751,99
You save 21%
Showing 1 - 48 of 54

Valtra T 174 parts for cooling, sensors and the pick up hitch

When a Valtra T 174 runs hotter than usual or the display flags an exhaust fault, the hunt usually starts with a sensor or a hose. This page holds more than 50 replacement parts for the tractor, from GRANIT, Scharmüller, Walterscheid and Wabco, plus a few items under the MASSEY FERGUSON name.

Cooling circuit

Radiator hoses, thermostats and temperature sensors keep the engine in its working window. A hose that feels soft or has swollen at the clamp should be replaced before it bursts, and fit new hose clamps while you are at it. The belt tensioner keeps the belt for the water pump and alternator tight. If the belt squeals or the tensioner arm judders, inspect the belt itself for cracks as well.

Changing a NOx sensor

NOx sensors sit in the exhaust and can seize solid. Let the exhaust cool until it is just warm, use penetrating oil and a proper sensor socket, and only unplug the lead once the sensor is out. A touch of high temperature anti seize on the new thread makes the next change easier, unless the sensor comes pre coated.

Hitch and forced steering

The T 174 uses a pick up hitch at the rear, and for that there are drawbars, screw ball adapters, support plates, adapter plates and the Piton Fix system. For trailers with a steered axle you will find forced steering parts, such as the insert that links the trailer's steering rod to the tractor. Lockable fuel caps, seals for pressure lines and a rear view mirror round things off.

Read the model and serial number off the type plate. Sensors and thermostats usually carry their reference number on the part itself. Check it against the product description, because temperature sensors in particular come in several versions that look almost identical.

Forced steering is all about precision. The insert and the steering rod must sit without play, otherwise the trailer will not follow the tractor's track neatly through bends and its tyres wear unevenly. When hitching up, check that the insert's locking device is properly secured and that the rod moves freely at full lock. Tighten a screw ball adapter to the correct torque and check it again after the first day of work.

Other models in the T line

Each of those pages shows only what is approved for that tractor, so there is no guesswork. Parts for other Valtra-Valmet tractors are gathered on Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart