Menu
EUR

Valtra N 121 tractor parts & technical data

When servicing the Valtra N 121 you want to know what fits. This page shows more than 130 parts for the N1 series, such as electrics and lighting.

131 parts found for Valtra-Valmet N 121
Show:
PROBOSS Seat PROBOSS AS4550 air suspended 12 V, 550 mm, seat heater
PROBOSS
On-board voltage: 12 V. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 550 mm. Joystick console: Optional. S... More
On-board voltage: 12 V. Upholstery type: Fabric. Seat contact switch: ...
€1.867,44 €1.543,34 €1.839,59 €1.520,32
You save 1%
GRAMMER Tractor seat Maximo Dynamic DDS MSG95AL/741 air suspended Steyr
GRAMMER
Suspension: Air suspension. Upholstery type: Fabric. Track gauge: 260 mm. Seat width: 550 mm. Side horizontal suspension: Yes. Fore/aft isolator: Yes.... More
Suspension: Air suspension. Upholstery type: Fabric. Track gauge: 260 ...
€2.776,81 €2.294,88
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 x 80 mm. Guide width: 30 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pat...
€638,19 €527,43
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Dipped beam, full beam. Dimensions W x H x D: 16... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€124,12 €102,58 €114,19 €94,37
You save 8%
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.104,81 €913,07 €873,47 €721,88
You save 21%
DANA Spicer Plug front axle 745
€20,26 €16,75
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Scharmüller
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000 | Colour: AGCO grey | Guide width (mm): 30 | Rail width (mm): 335 | ... More
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€630,05 €520,70 €579,65 €479,05
You save 8%
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: consumer, 2: start, Installation dimension: Ø 16.5 mm, Without preheat... More
Version: 12 V, with 4 blade terminal connections, Switch positions: 0:...
€16,13 €13,33
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Walterscheid
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg, from 40 km/h 2,000 kg. More
Quick height adjustment with rotation lock, load capacity up to 40 km/...
€2.111,26 €1.744,84 €1.719,18 €1.420,81
You save 19%
Gear wheel main shaft 31 teeth Valtra-Valmet
Number of teeth: 31. More
Number of teeth: 31.
€423,24 €349,79 €389,38 €321,80
You save 8%
BOSCH High-pressure pump CP1H Fendt, Massey Ferguson, Valtra-Valmet
€1.964,66 €1.623,69 €1.665,11 €1.376,13
You save 15%
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: 12 V: 5-12 A, 24 V: 3-8 A, protection class: IP67, NC = normally close... More
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, powe...
€32,65 €26,98 €30,04 €24,82
You save 8%
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
Scharmüller
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version: Standard | Colour: AGCO grey | Load capacity (t): 3 | Length (mm): 4... More
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual...
€987,09 €815,78 €908,12 €750,51
You save 8%
Wiper motor Massey Ferguson, Valtra-Valmet
€223,30 €184,55 €205,44 €169,78
You save 8%
Filter dryer Ø 76 mm, 228 mm, connection thread M
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O-ring B = male thread 3/8"" - 18UNF Pressure switch thread: 1 3/8"" - 24 O-ring ... More
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O...
€63,79 €52,72 €58,69 €48,50
You save 8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Connection thread E: - More
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O...
€54,07 €44,69 €49,74 €41,11
You save 8%
Gear wheel planetary set rear axle 82 teeth Valtra-Valmet
€894,96 €739,64 €823,36 €680,47
You save 8%
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Cobo
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning light function. More
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard w...
€58,12 €48,03 €53,47 €44,19
You save 8%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.207,08 €997,59 €954,33 €788,70
You save 21%
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€583,34 €482,10 €536,67 €443,53
You save 8%
GRAMMER Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
GRAMMER
Super comfort seat with low-frequency air suspension and 12V compressor. APS: automatic positioning system. Armrests height adjustable and folding. Ad... More
Super comfort seat with low-frequency air suspension and 12V compresso...
€1.991,23 €1.645,64
LUK Torsion damper Valtra-Valmet C90 - C150, M120 - M150, N82 - N142
€801,39 €662,31 €737,28 €609,32
You save 8%
MAHLE Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
MAHLE
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø (mm): - | Additional information: Compact alternator, dust-tight | Mounting L /... More
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø...
€388,90 €321,41 €232,93 €192,50
You save 40%
Gas strut door 250 N, 345 mm, stroke 126 mm Massey Ferguson 4745ZN
suitable for: Tür. Newtons: 250. A: 345 mm. B: 175 mm. C: 8 mm. D: 8 mm. Form: 2. d1: 8 mm. d2: 18 mm. Stroke: 126 mm. Menke no.: 202912. More
suitable for: Tür. Newtons: 250. A: 345 mm. B: 175 mm. C: 8 mm. D: 8 ...
€34,26 €28,31 €31,52 €26,05
You save 8%
Hydraulic lifting strut 540 - 650 mm, clevis / ball joint
D (mm): 70 | C (mm): 35 | L (mm): 540 - 650 | To fit: Valtra & Valmet | Type: Clevis joint/ball joint | S1 (mm): 32 | A (mm): 40 | B (mm): 28 More
D (mm): 70 | C (mm): 35 | L (mm): 540 - 650 | To fit: Valtra & Valmet ...
€643,17 €531,55 €591,72 €489,02
You save 8%
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
SANDEN
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connection: A2 | Nominal voltage (V): 12 | Pulley Ø (mm): 132 | Menke no.: 67... More
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a ...
€586,48 €484,69 €539,56 €445,92
You save 8%
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
€171,21 €141,50 €157,51 €130,18
You save 8%
DANA Spicer Wheel hub final drive front axle 730
€408,30 €337,44
GRAMMER Tractor seat Maximo Professional MSG95AL/731 air suspended
GRAMMER
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 530 mm. Joystick console: Optiona... More
Suspension: Air suspension. Upholstery type: Fabric. Seat contact swit...
€3.917,46 €3.237,57
Alternator 14 V, 120 A, flange 56 mm, Fendt, Valtra-Valmet
Pulley spacing (mm): - | Form: B | Additional information: Compact alternator, dust-tight | Belt tension hole Ø / R (mm): 8,3 / 86,0 | Nominal values... More
Pulley spacing (mm): - | Form: B | Additional information: Compact alt...
€275,46 €227,65 €253,42 €209,44
You save 8%
Clutches set 9+9 Valtra-Valmet 6250 - 8950, C90 - XM150
€230,48 €190,48 €212,04 €175,24
You save 8%
SACHS Shock absorber rear, gas pressure MSE27/13X47A2 Valtra-Valmet
SACHS
Dimensions (mm): MSE27/13X47A2 | Installation location: Rear | Design: Gas pressure | To fit: Valtra | System: Twin-tube More
Dimensions (mm): MSE27/13X47A2 | Installation location: Rear | Design:...
€698,55 €577,31 €642,67 €531,13
You save 8%
DANA Spicer Differential bevel gear final drive front axle 730
€244,50 €202,07 €224,94 €185,90
You save 8%
DANA Spicer Guard plate differential front axle 745
DANA Spicer Grooved nut bevel gear differential front axle 730
€82,27 €67,99 €75,69 €62,55
You save 8%
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€548,46 €453,27 €328,50 €271,49
You save 40%
Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
€331,16 €273,69 €304,67 €251,79
You save 8%
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Scharmüller
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail width (mm): 200 | D-value (kN): 10 | Colour: Black | Detent pin Ø (mm): ... More
Version: Standard | Category: Bearing supports | Guide width (mm): 25 ...
€668,46 €552,45 €614,98 €508,25
You save 8%
PTO shaft end piece 1 3/8 inch, 6 splines, 245 mm Valtra-Valmet
Version: 1 3/8"", 6 grooves | Length (mm): 245 More
Version: 1 3/8"", 6 grooves | Length (mm): 245
€415,22 €343,16 €382,00 €315,70
You save 8%
PTO shaft end piece 1 3/8 inch, 6 splines Valtra-Valmet
Version: 1 3/8"", 6 grooves More
Version: 1 3/8"", 6 grooves
€206,82 €170,93 €190,27 €157,25
You save 8%
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
CARLISLE
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth More
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€17,19 €14,20
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 210 ccm
No. of grooves: 2 | Nominal voltage (V): 12 | Connection: 7/8"" x 3/4"", vertical | Oil quantity (ccm): 210 | Suitable oil: PAG 46 | Fixing: EM | Pull... More
No. of grooves: 2 | Nominal voltage (V): 12 | Connection: 7/8"" x 3/4"...
€426,97 €352,87 €392,81 €324,64
You save 8%
AKS-Dasis Filter dryer airco 203 mm, Ø 63 mm, O-ring, M Valtra-Valmet
AKS-Dasis
Connection thread A: 11 | Connection thread: M | Connection: O-ring A = male thread 5/8"" 18UNF B = male thread 5/8"" - 18UNF Switch: female thread 3/... More
Connection thread A: 11 | Connection thread: M | Connection: O-ring A ...
€87,58 €72,38 €80,57 €66,59
You save 8%
DANA Spicer O-ring as front axle 745, 4 g
€17,60 €14,55
Showing 1 - 48 of 131

Valtra N 121 parts

This page gathers more than 130 parts that fit the Valtra N 121. We have grouped them the way a mechanic would work through the tractor: hitch first, then the engine, then the cab.

Ball hitch and drawbar

At the back there are ball type drawbars and separate balls, from brands such as Scharmüller and Walterscheid, as well as DANA Spicer parts for this tractor. Check the ball now and then for wear. Once it goes oval or flat on one side, the coupling develops play and the drawbar eye on the trailer wears faster too.

Engine, turbo and cooling

Black soot around the exhaust manifold, a ticking noise on a cold start or exhaust fumes in the cab usually mean a leak near the turbocharger. There is a seal for the manifold at the turbo for the N 121, along with seal kits, a crankshaft seal, O-rings and cylinder head bolts. Radiator hoses and an aircon compressor cover cooling and climate.

A tip for head work: always fit new cylinder head bolts once the head has been off. Many engines use stretch bolts that lengthen permanently when tightened, and they will not clamp the head properly a second time. Tighten them in the specified sequence and in stages, working from the centre outwards. The same principle applies to the exhaust manifold, with a new seal, clean faces and nuts tightened evenly so the manifold does not pull out of line.

Cab, lights and seating

If the cab door no longer latches or springs open on rough tracks, the door lock is due, and it is listed here. Lighting covers headlights, LED headlights, work lamps and a flasher unit. When you switch to LED, check that the flasher unit suits the lower load, otherwise the indicators will blink too fast. Tractor seats, including GRAMMER, are here for the driver.

The plate on the tractor confirms it is an N 121, and the reference number on the old part should match the description of the new one. When replacing a hose, hold the old one against the new one, since a bend in the wrong place will not fit. Renew rusty hose clamps at the same time.

Related types have their own pages, so each tractor shows only what fits it: Valtra N 91, Valtra N 101, Valtra N 111 and Valtra N 141. Need parts for a different Valtra tractor? Start from the overview page Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart