Menu
EUR

Valtra T 194 tractor parts & technical data

Choose from more than 50 parts for the Valtra T 194 from the T4 series, such as trailer couplings, electrics, and brake and transmission parts.

58 parts found for Valtra-Valmet T 194
Show:
Wabco Solenoid valve 3/2-way, 12 V, 1,41 A, M16 x 1,5, standard closed
Wabco
Eligible: Environmental protection and safety (formerly de minimis) More
Eligible: Environmental protection and safety (formerly de minimis)
€408,59 €337,68 €375,90 €310,66
You save 8%
Wabco Electrically controlled air dryer M22 x 1,5, cartridge M39, 13 bar
€412,20 €340,66 €379,22 €313,41
You save 8%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€630,05 €520,70 €579,65 €479,05
You save 8%
BOSCH Fuel pre-filter line filter D 37 mm, H 105 mm, connection 6 mm
BOSCH
C (mm): 35 | F: 6 | D (mm): 37 | H (mm): 105 | Height (mm): 105 | Version: Leitungsfilter | G (mm): 6 | Additional information: Typformel: F4058 | Ø ... More
C (mm): 35 | F: 6 | D (mm): 37 | H (mm): 105 | Height (mm): 105 | Vers...
€3,99 €3,30
SACHS Shock absorber rear, air spring PSE36/20X71A2ED Valtra-Valmet
SACHS
To fit: Valtra | System: Air suspension bellows and shock absorber make a complete air spring | Dimensions (mm): PSE36/20X71A2ED | Installation locati... More
To fit: Valtra | System: Air suspension bellows and shock absorber mak...
€1.483,26 €1.225,83 €1.364,60 €1.127,77
You save 8%
NOX sensor Massey Ferguson, Valtra-Valmet, Fendt
To fit: Massey Ferguson, Valtra-Valmet, Fendt. More
To fit: Massey Ferguson, Valtra-Valmet, Fendt.
€453,61 €374,88 €417,32 €344,89
You save 8%
MASSEY FERGUSON Waterpompset Valtra-Valmet T144-T254, Massey Ferguson 7614-7726
MASSEY FERGUSON
Reference no.: ACP055583C, ACP055583B, ACP055583A, V837091197, V837091112. More
Reference no.: ACP055583C, ACP055583B, ACP055583A, V837091197, V837091...
€954,01 €788,44
Walterscheid Inner part ball 80 rail width 390 mm, pin Ø 25 mm, 4000 kg
Walterscheid
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value (kN): 102 | Detent pin Ø (mm): 25 | Rail width (mm): 390 | Description: This pr... More
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value ...
€2.263,90 €1.870,99 €1.789,86 €1.479,23
You save 21%
Walterscheid Piton Fix rail width 390 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.781,58 €1.472,38 €1.408,53 €1.164,08
You save 21%
Scharmüller Forced steering 80 Pick-Up Hitch einsätze K50, 2 ton, 101 mm
Scharmüller
Assembly notes: Both ends. Lock: K50. Steering power: 2 t. Internal width: 101 mm. Colour: Black. Description: Approved for steering forces up to 20 k... More
Assembly notes: Both ends. Lock: K50. Steering power: 2 t. Internal wi...
€1.031,70 €852,64 €977,51 €807,86
You save 5%
Walterscheid Drawbar ball 80 automatic, rail 390 mm, pin Ø 25 mm, 2000/2800 kg
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 2000 / 2800 kg. Colour: black. Description: This product is a ball hitch.... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.277,79 €1.882,47 €1.850,84 €1.529,62
You save 19%
Scharmüller Schroefkogeladapter K80 D 118 kN, nose weight 3000 kg, M16 / M20
Scharmüller
Category: Components and special solutions | Lock: ball 80 | Hole (mm): M16 / M20 | Description: Compatible with JD drawbar Cat. 4 (ex works) | V-valu... More
Category: Components and special solutions | Lock: ball 80 | Hole (mm)...
€1.926,92 €1.592,50 €1.772,77 €1.465,10
You save 8%
Scharmüller Schroefkogeladapter K80 3000 kg, 118 kN, bore M16 / M20, black
Scharmüller
V-value (kN): 83 | Hole (mm): M16 / M20 | Version: Threaded ball adapter K80 | Description: Suitable for Scharmüller drawbar part no. 10.820.9270.0 |... More
V-value (kN): 83 | Hole (mm): M16 / M20 | Version: Threaded ball adapt...
€1.926,92 €1.592,50 €1.822,77 €1.506,42
You save 5%
Scharmüller Schroefkogeladapter K80 3000 kg, 118 kN, bore M16, thread M20, black
Scharmüller
D-value (kN): 118 | Thread: M20 | Hole (mm): M16 | Load capacity (kg): 3000 | Lock: ball 80 | Colour: Black | Description: Compatible with CNH drawbar... More
D-value (kN): 118 | Thread: M20 | Hole (mm): M16 | Load capacity (kg):...
€1.926,92 €1.592,50 €1.822,77 €1.506,42
You save 5%
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 4,86 kg
Scharmüller
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Conn... More
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: An...
€481,06 €397,57 €453,50 €374,79
You save 6%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 175 mm. Colour: Black. Overhang... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
Temperature sensor exhaust aftertreatment
€233,28 €192,79 €214,62 €177,37
You save 8%
Differential pressure sensor Massey Ferguson, Valtra-Valmet, Fendt
€176,91 €146,21 €169,54 €140,11
You save 4%
Rail pressure sensor Valtra-Valmet, Fendt, Massey Ferguson
€295,33 €244,07 €271,70 €224,55
You save 8%
BOSCH Pressure regulator CP4 Valtra-Valmet, Fendt, Massey Ferguson
€184,72 €152,66 €156,56 €129,39
You save 15%
Rail pressure sensor Fendt 5255L-9470X, Massey Ferguson Series 5600-9530
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 170 mm. Colour: Black. Overhang... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
NOX sensor Massey Ferguson, Challenger, Valtra-Valmet
€874,29 €722,55 €804,35 €664,75
You save 8%
Tank cap engine cooling
€46,16 €38,15 €42,47 €35,10
You save 8%
Signal transmitter exhaust aftertreatment Valtra-Valmet T 144 - T 254
€633,59 €523,63 €582,90 €481,74
You save 8%
AdBlue-feed unit Valtra-Valmet A84-A134
Description: AdBlue supply units ensure even metering of AdBlue depending on the load on the common rail engine. It is important that only filtered ur... More
Description: AdBlue supply units ensure even metering of AdBlue depend...
€1.047,79 €865,94 €963,97 €796,67
You save 8%
Rear-view mirror 435 x 223 mm, left or right control Fendt
Dimensions: 435 x 223 mm. Version: Left or right control. Installation location: Right/left. Notes: Manual operation. More
Dimensions: 435 x 223 mm. Version: Left or right control. Installation...
€106,52 €88,03 €98,00 €80,99
You save 8%
Temperature sensor Fendt, Massey Ferguson, Valtra-Valmet
€94,76 €78,31 €87,18 €72,05
You save 8%
Radiator hose, top Valtra-Valmet T 144 - T 254
€58,78 €48,58 €54,08 €44,69
You save 8%
Scharmüller Pick-Up Hitch einsätze 80 shank 70 x 80 mm, 445 mm, bore 30,5 mm
Scharmüller
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Overhang: 360 mm. Hole: 30,5 mm. ... More
suitable for: Claas. Series: Axion 800 (A30/A31). Category: Pick-up hi...
€1.465,37 €1.211,05
AdBlue-filter Fendt, John Deere, Massey Ferguson
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no.: P956170. Fleetguard no.: UF101. Hifi no.: SD70380. Hengst no.: E103UD295. More
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no....
€59,17 €48,90 €54,44 €44,99
You save 8%
Tensioning pulley Ø 74 / 46,3 mm, PK12
€46,78 €38,66 €43,04 €35,57
You save 8%
Belt tensioner Ø 75 mm, width 46,5 mm Fendt, Massey Ferguson
Outer Ø: 75 mm. Width: 46,5 mm. More
Outer Ø: 75 mm. Width: 46,5 mm.
€135,96 €112,36 €125,08 €103,37
You save 8%
Showing 1 - 48 of 58

Valtra T 194 parts: sensors, cooling and hitching

When a warning light comes on in a T 194, the culprit is surprisingly often a sensor, a hose or a connector rather than the engine itself. That is where this page starts. Altogether there are more than 50 new replacement parts that fit the Valtra T 194, from GRANIT, Scharmüller, Walterscheid, BOSCH and Wabco.

Sensors and engine management

For the engine electronics there are NOX sensors for the exhaust aftertreatment, rail pressure sensors for the fuel system and temperature sensors. Before you replace a NOX sensor, read the fault code and inspect the plug and wiring. The sensor sits close to the hot exhaust, and a connector damaged by heat or moisture throws exactly the same code as a failed sensor. Put a little high temperature copper grease on the thread of the new one so it will come out again next time.

Cooling and the belt drive

Thermostats and radiator hoses, including the top hose, keep the cooling circuit tight. There are also belt tensioners, seals for the pressure line and a lockable fuel cap, useful for a tractor left at the edge of a field overnight. Spin a tensioner pulley by hand when the belt is off. If it feels rough or has play, replace it along with the belt.

Not sure about the thermostat? Hang the old one in a pan of water on the stove. If it has not opened by the time the water boils, it is finished. Always fit a new thermostat seal, and while you are there, check that the top radiator hose still feels firm at the connection.

Hitching at the rear

  • Drawbars with a ball, including manual versions
  • Pick-Up Hitch parts, screw-in ball adapters and support plates
  • Piton Fix hitches and adapter plates
  • Forced steering inserts for steered trailers

A K80 ball hitch lasts longer if you keep the ball clean and lightly greased. Check it with a caliper now and then. Once it has worn oval, the drawbar gets play and knocks every time you pull away.

The serial plate and the rest of the T range

Before ordering, check that the serial plate really says T 194 and note the chassis number. For sensors and thermostats, the reference number on the old part makes matching easy. The other models in this range each have their own page, handy if a second Valtra works on the same farm: Valtra T 144, Valtra T 154, Valtra T 174, Valtra T 214 and Valtra T 234. Running a different Valtra as well? Every model has its own overview on Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart