Whether yours says Valtra 505 or Valmet 505, this page lists more than 60 matching parts for the electrics, steering and front axle, and the engine.
The Valtra 505, still known to many owners as the Valmet 505, is the kind of tractor you can work on yourself, and with the right parts it keeps earning its place in the yard. This page lists more than 60 replacement parts for it, from GRANIT, MAHLE, Cobo, HELLA and LUK.
Steering ball joints wear on any older tractor, and play in the linkage shows up straight away on the road. For the brakes there are wheel brake cylinders and repair kits for the brake cylinder. A repair kit is worth fitting while the bore is still smooth. If you see rust or scoring, go for a new cylinder instead. Bleed the brakes carefully afterwards, starting with the wheel furthest from the master cylinder.
On the engine side you will find oil sump gaskets, crankshaft seals, coolant seals and radiator hoses. When replacing a crankshaft seal, take care not to mark the running surface while removing the old one, and lightly grease the lip of the new seal before fitting. The feed pump supplies diesel to the injection pump. After changing it, bleed the fuel system or the engine will not fire. A stop cable is listed too, for when the old one has become stiff.
Starter motors, alternators, connection cables, a flasher unit and a headlight keep the electrics in order. If the indicators suddenly flash twice as fast, a blown bulb is the usual cause rather than the flasher unit. For the clutch there are clutch plates, including ones from LUK.
On a tractor of this age the clutch plate has often been replaced before. If it is due again, inspect the flywheel for scoring and heat marks and check the pressure plate and release bearing at the same time. A new plate on a damaged flywheel will soon slip again. Centre the plate with an alignment tool when fitting it, so the input shaft slides in without force when the tractor goes back together, and give the splines the thinnest smear of grease.
The type plate tells you which name the tractor left the factory with and exactly which model it is. With the old part in your hand, compare the reference number on it with the product description. On older machines something has often been replaced before, and then that number is more reliable than the model alone.
The 505 belongs to the same line as the Valtra 605, Valtra 705 and Valtra 805, each with a page of its own. For the rest of the Valtra and Valmet line up, head to Valtra parts.