Menu
EUR

Valtra 6100 tractor parts & technical data

The Valtra 6100, also known as the Valmet 6100, belongs to the Mezzo series. Here you will find more than 110 parts for lighting, steering and electrics.

120 parts found for Valtra-Valmet 6100
Show:
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 x 80 mm. Guide width: 30 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pat...
€638,19 €527,43
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Dipped beam, full beam. Dimensions W x H x D: 16... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€124,12 €102,58 €114,19 €94,37
You save 8%
DANA Spicer Plug front axle 745
€20,26 €16,75
MANN-FILTER Fuel filter WK731
€10,74 €8,87
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Scharmüller
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000 | Colour: AGCO grey | Guide width (mm): 30 | Rail width (mm): 335 | ... More
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€630,05 €520,70 €579,65 €479,05
You save 8%
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: consumer, 2: start, Installation dimension: Ø 16.5 mm, Without preheat... More
Version: 12 V, with 4 blade terminal connections, Switch positions: 0:...
€16,13 €13,33
Gear wheel main shaft 31 teeth Valtra-Valmet
Number of teeth: 31. More
Number of teeth: 31.
€423,24 €349,79 €389,38 €321,80
You save 8%
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: 12 V: 5-12 A, 24 V: 3-8 A, protection class: IP67, NC = normally close... More
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, powe...
€32,65 €26,98 €30,04 €24,82
You save 8%
VDO Coolant temperature sensor M14 x 1,5, +40 - +120 °C, 98 °C
VDO
Version: Temperature measuring range: +40°C to +120°C, Thread: M14 x 1.5, Resistance values: 287.4 - 22.7 ohm, Outlet: 1-pin via earth, Warning cont... More
Version: Temperature measuring range: +40°C to +120°C, Thread: M14 x...
€162,00 €133,88 €149,04 €123,17
You save 8%
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
Scharmüller
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version: Standard | Colour: AGCO grey | Load capacity (t): 3 | Length (mm): 4... More
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual...
€987,09 €815,78 €908,12 €750,51
You save 8%
Wiper motor Massey Ferguson, Valtra-Valmet
€223,30 €184,55 €205,44 €169,78
You save 8%
Filter dryer Ø 76 mm, 228 mm, connection thread M
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O-ring B = male thread 3/8"" - 18UNF Pressure switch thread: 1 3/8"" - 24 O-ring ... More
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O...
€63,79 €52,72 €58,69 €48,50
You save 8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Connection thread E: - More
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O...
€54,07 €44,69 €49,74 €41,11
You save 8%
LUK Clutch plate TZFA organic torsiegeveerd 41 x 45 mm, 22 splines
LUK
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Organic clutch lining More
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Organic...
€519,27 €429,15 €477,73 €394,82
You save 8%
DANA Spicer O-ring differential front axle 745, 2 g
Gear wheel planetary set rear axle 82 teeth Valtra-Valmet
€894,96 €739,64 €823,36 €680,47
You save 8%
Coupling sleeve transmission-input shaft Valtra-Valmet
€255,14 €210,86 €234,73 €193,99
You save 8%
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Cobo
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning light function. More
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard w...
€58,12 €48,03 €53,47 €44,19
You save 8%
FTE Clutch master cylinder Ø 25,4 mm, DOT4, gray cast iron Valtra-Valmet
FTE
Material: Grey cast iron | Hole Ø (mm): 25.4 | Medium: DOT4 | Additional information: With piston rod More
Material: Grey cast iron | Hole Ø (mm): 25.4 | Medium: DOT4 | Additio...
€209,23 €172,92 €192,49 €159,08
You save 8%
MAHLE Starter motor 12 V, 3,0 kW, 11 teeth, mounting Ø 89 mm, mounting angle r 45
€505,95 €418,14 €303,03 €250,44
You save 40%
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€583,34 €482,10 €536,67 €443,53
You save 8%
MAHLE Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
MAHLE
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø (mm): - | Additional information: Compact alternator, dust-tight | Mounting L /... More
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø...
€388,90 €321,41 €232,93 €192,50
You save 40%
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
SANDEN
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connection: A2 | Nominal voltage (V): 12 | Pulley Ø (mm): 132 | Menke no.: 67... More
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a ...
€586,48 €484,69 €539,56 €445,92
You save 8%
Clutch plate 330 Z organic 41 x 45 mm, 22 splines Valtra-Valmet
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Organic...
€404,62 €334,40 €372,25 €307,65
You save 8%
LUK Central release bearing 2 connections 45,5 x 95 x 105 mm
LUK
Dimensions (mm): 45.5 x 95 x 105 More
Dimensions (mm): 45.5 x 95 x 105
€486,06 €401,70 €447,18 €369,57
You save 8%
LUK Thrust bearing driving clutch 60 x 97 x 26 Fendt, Landini, Valtra-Valmet
LUK
Dimensions (mm): 60 x 97 x 26 More
Dimensions (mm): 60 x 97 x 26
€121,34 €100,28 €111,63 €92,26
You save 8%
LUK Clutch plate UZF organic 41 x 45 mm, 22 splines Valtra-Valmet
LUK
Material specifications: Organic clutch lining | Dimensions (mm): 41 x 45 22 grooves More
Material specifications: Organic clutch lining | Dimensions (mm): 41 x...
€509,22 €420,84 €468,48 €387,18
You save 8%
MAHLE Alternator 14 V, 65 A, pulley-Ø 80 mm, form A
MAHLE
Pulley Ø (mm): 80.0 | Charging current (A): 65 | Form: A | Pulley spacing (mm): 37,0 | Nominal values (V / A): 14 / 65 | Mounting L / d / R (mm): 82,... More
Pulley Ø (mm): 80.0 | Charging current (A): 65 | Form: A | Pulley spa...
€234,35 €193,68 €140,36 €116,00
You save 40%
DANA Spicer O-ring differential front axle 755, 1 g
Master brake cylinder K1, DOT 4, Valtra-Valmet, Case IH
€137,83 €113,91 €126,80 €104,80
You save 8%
Synchro ring reversing gear Valtra-Valmet
€521,59 €431,07 €479,86 €396,58
You save 8%
LUK Clutch plate TDCA sintered 41 x 45 mm, 22 splines Valtra-Valmet
LUK
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Sintere...
€520,71 €430,34 €479,05 €395,91
You save 8%
Ball head with female thread 23,5 - 26,5 mm, M22 x 1,5, 290 mm Valmet
E (mm): 23,5 | F (mm): 26,5 | A (mm): 290 | Taper (mm): 23,5 - 26,5 | D (mm): M22 x 1,5 | C (mm): M20 x 1,5 More
E (mm): 23,5 | F (mm): 26,5 | A (mm): 290 | Taper (mm): 23,5 - 26,5 | ...
€107,98 €89,24 €99,34 €82,10
You save 8%
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Scharmüller
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail width (mm): 200 | D-value (kN): 10 | Colour: Black | Detent pin Ø (mm): ... More
Version: Standard | Category: Bearing supports | Guide width (mm): 25 ...
€668,46 €552,45 €614,98 €508,25
You save 8%
PTO shaft end piece 1 3/8 inch, 6 splines Valtra-Valmet
Version: 1 3/8"", 6 grooves More
Version: 1 3/8"", 6 grooves
€206,82 €170,93 €190,27 €157,25
You save 8%
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
CARLISLE
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth More
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€17,19 €14,20
Clutch master cylinder Valtra-Valmet 6000 - 8750, N91, T120 - T171
€197,43 €163,17 €181,64 €150,11
You save 8%
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
DANA Spicer
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120 More
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€46,81 €38,69 €43,07 €35,59
You save 8%
DANA Spicer Intermediate bush as front axle 745, 120 x 127 x 40 mm
DANA Spicer
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40 | Outer Ø (mm): 127 More
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40...
€140,42 €116,05 €129,19 €106,77
You save 8%
Radiator hose, top inner-Ø 40 mm Valtra-Valmet Mezzo 6000-6800
€51,59 €42,64 €47,46 €39,23
You save 8%
Oil sump gasket Valtra-Valmet, Fendt engine 309D, 309DS, 311DS
Description: Only fits 505, 605. More
Description: Only fits 505, 605.
€46,05 €38,06 €42,37 €35,01
You save 8%
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€77,66 €64,18 €71,45 €59,05
You save 8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 475, 484, 584, 674, 684, 784, 884 385, 485, 485XL, 585, 585XL, 685, 685... More
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 4...
€48,67 €40,22 €44,78 €37,01
You save 8%
Aircon compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil
Reference no.: QP7H15-8024 | Suitable oil: PAG 46 | For compressor: 7H15 | Nominal voltage (V): 12 | Pulley Ø (mm): 132 | Fixing: EM | Oil quantity (... More
Reference no.: QP7H15-8024 | Suitable oil: PAG 46 | For compressor: 7H...
€357,93 €295,81 €329,30 €272,15
You save 8%
Ball joint 295 mm, M24 x 1,5, M22 x 1,5, taper 29 - 32,2 mm
A: 295 mm. C: M24 x 1,5 mm. D: M22 x 1,5 mm. E: 29 mm. F: 32,2 mm. Taper: 29 - 32,2 mm. More
A: 295 mm. C: M24 x 1,5 mm. D: M22 x 1,5 mm. E: 29 mm. F: 32,2 mm. Tap...
€103,69 €85,69 €95,39 €78,84
You save 8%
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF. More
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€33,85 €27,98
Showing 1 - 48 of 120

Valtra 6100 and Valmet 6100 parts

Valmet on the bonnet, Valtra on the paperwork? For parts it makes no difference, because the Valtra 6100 is the same tractor as the Valmet 6100. This page lists more than 110 parts that fit it, from GRANIT, Scharmüller, DANA Spicer, LUK and MAHLE.

Engine and driveline

Around the engine there are valve cover gaskets, valve cover seals, a crankshaft seal and gaskets such as the one for the silencer. For the driveline you will find clutch plates and O-rings, for example for the differential. Repair kits let you overhaul a component instead of replacing it outright when the housing is still sound.

Steering, hitch and cab

The steering side has ball joints and separate balls. At the rear there is a ball drawbar. In the cab you will find door locks, and for lighting there are work lamps, indicator position lights and a flasher unit.

Clutch and lighting tips

Do not replace the clutch plate on its own if the pressure plate or release bearing is also worn. Look at the flywheel when it is out. Grooves or blue heat spots on the friction face mean it needs skimming or replacing, otherwise the new plate will judder or slip. If the indicators suddenly flash fast or not at all, check the bulbs and earth first and the flasher unit after that. A dab of contact grease on the plugs of work lamps and indicator lights keeps moisture and corrosion out. To feel play in a ball joint, rest your hand on it while someone turns the steering wheel back and forth.

A word on the stop cable

Stop cables are on this page as well. After fitting one, check that the engine shuts down fully with the cable pulled all the way out and that the cable springs back on its own. Route it without tight bends and give it a drop of oil now and then, so it keeps running smoothly and the engine does not carry on idling when you want it off.

Data plate and part numbers

The 6100 is part of the Mezzo series, which includes several models that look alike at first glance. The data plate settles it. With a clutch plate, also check the number printed on the plate and the spline count in the hub. With gaskets and seals, the old one is usually the best thing to compare against.

These tractors from the Mezzo series each have their own page:

For the brand as a whole, including newer Valtra tractors, go to Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart