Menu
EUR

Valtra 705 tractor parts & technical data

Valtra 705 or Valmet 705, this page covers both names. Browse more than 60 parts, including electrics, lighting and components for steering and front axle.

66 parts found for Valtra-Valmet 705
Show:
Installation cable mini-contact plug 1 m
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510. More
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510.
€171,07 €141,38 €157,38 €130,07
You save 8%
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Dipped beam, full beam. Dimensions W x H x D: 16... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€124,12 €102,58 €114,19 €94,37
You save 8%
VDO Coolant temperature sensor M14 x 1,5, +40 - +120 °C, 98 °C
VDO
Version: Temperature measuring range: +40°C to +120°C, Thread: M14 x 1.5, Resistance values: 287.4 - 22.7 ohm, Outlet: 1-pin via earth, Warning cont... More
Version: Temperature measuring range: +40°C to +120°C, Thread: M14 x...
€162,00 €133,88 €149,04 €123,17
You save 8%
Starter motor 12 V, 3,0 kW, 11 teeth, 229,5 mm, Ø 89 mm
€315,38 €260,64 €290,15 €239,79
You save 8%
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Cobo
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning light function. More
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard w...
€58,12 €48,03 €53,47 €44,19
You save 8%
MAHLE Starter motor 12 V, 3,0 kW, 11 teeth, mounting Ø 89 mm, mounting angle r 45
€505,95 €418,14 €303,03 €250,44
You save 40%
Clutch plate 310 sintered 41 x 45 mm, 22 splines Valtra-Valmet
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Germany More
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Sintere...
€221,34 €182,93 €203,63 €168,29
You save 8%
Feed pump 3 hole, 50 x 34 mm, roller 23 mm Mercedes Benz, Valtra-Valmet
Version: 3 holes, Vertical hole spacing: 50 mm, Horizontal hole spacing: 34 mm, Flange to roller end: 23 mm. More
Version: 3 holes, Vertical hole spacing: 50 mm, Horizontal hole spacin...
€45,33 €37,46 €41,70 €34,47
You save 8%
LUK Thrust bearing driving clutch 60 x 97 x 26 Fendt, Landini, Valtra-Valmet
LUK
Dimensions (mm): 60 x 97 x 26 More
Dimensions (mm): 60 x 97 x 26
€121,34 €100,28 €111,63 €92,26
You save 8%
MAHLE Alternator 14 V, 65 A, pulley-Ø 80 mm, form A
MAHLE
Pulley Ø (mm): 80.0 | Charging current (A): 65 | Form: A | Pulley spacing (mm): 37,0 | Nominal values (V / A): 14 / 65 | Mounting L / d / R (mm): 82,... More
Pulley Ø (mm): 80.0 | Charging current (A): 65 | Form: A | Pulley spa...
€234,35 €193,68 €140,36 €116,00
You save 40%
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€548,46 €453,27 €328,50 €271,49
You save 40%
Starter motor with reduction 12 V, 2,7 kW, 11 teeth, 193 mm, Ø 89 mm
€247,59 €204,62 €227,78 €188,25
You save 8%
Master brake cylinder K1, DOT 4, Valtra-Valmet, Case IH
€137,83 €113,91 €126,80 €104,80
You save 8%
Alternator 14 V / 65 A, form A, flange 86,0 mm, pulley-Ø 90,0 mm
To fit as: Ford, Lindner, Valtra-Valmet More
To fit as: Ford, Lindner, Valtra-Valmet
€239,13 €197,63 €220,00 €181,82
You save 8%
Hydraulic pump double 22,5 + 12 cm³ Valtra-Valmet 505 - 905
Output volume (cc/rev): 22,5 + 12 More
Output volume (cc/rev): 22,5 + 12
€837,13 €691,84 €770,16 €636,50
You save 8%
Alternator 14 V / 65 A, flange 86 mm, pulley Ø 90 mm
Flange size (mm): 86,0 | Belt tension hole Ø / R (mm): M8 / 86,0 | Mounting L / d / R (mm): 86,0 / 8,2 / 86,0 | Additional information: With combinat... More
Flange size (mm): 86,0 | Belt tension hole Ø / R (mm): M8 / 86,0 | Mo...
€152,63 €126,14 €140,42 €116,05
You save 8%
Radiator hose, top inner-Ø 40 mm Valtra-Valmet Mezzo 6000-6800
€51,59 €42,64 €47,46 €39,23
You save 8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 475, 484, 584, 674, 684, 784, 884 385, 485, 485XL, 585, 585XL, 685, 685... More
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 4...
€48,67 €40,22 €44,78 €37,01
You save 8%
Clutch plate single clutch 1020 - 1140 Kp, flywheel flat
Contact pressure (Kp): 1020 - 1140 | Flywheel design: Flat | Additional information: Made in Germany More
Contact pressure (Kp): 1020 - 1140 | Flywheel design: Flat | Additiona...
€225,76 €186,58 €207,70 €171,65
You save 8%
Radiator Valtra-Valmet 505-855, engine Sisu 311, 411
To fit as: Valtra-Valmet Engine Sisu: 311, 411; Series 05: 505, 605, 705, 805; Series 600: 615; Series Valmet: 655, 715, 755, 815, 855 More
To fit as: Valtra-Valmet Engine Sisu: 311, 411; Series 05: 505, 605, 7...
€581,76 €480,79 €535,22 €442,33
You save 8%
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF. More
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€33,85 €27,98
Cylinder head gasket Valtra-Valmet 705, 805, 865
€71,47 €59,07 €65,75 €54,34
You save 8%
Injection nozzle Valtra-Valmet 205-855
Type formula: DLLA150S804, 0433271856. More
Type formula: DLLA150S804, 0433271856.
€40,77 €33,69 €37,51 €31,00
You save 8%
Stop cable 2015 / 2250 mm Valtra-Valmet 205-905, 6000-8750
To fit as: Valtra - Valmet 205, 305, 365, 405, 465, 505, 600, 605, 665, 700, 705, 805, 865, 900, 905, 6000, 6100, 6300, 6400, 6600, 6800, 8000, 8100, ... More
To fit as: Valtra - Valmet 205, 305, 365, 405, 465, 505, 600, 605, 665...
€34,18 €28,24
Ball joint taper 16,2 - 18,3 mm, length 100 mm, M14 x 1,5, M22 x 1,5 L
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 L mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2 - 18,3 mm. More
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 L mm. E: 16,2 mm. F: 18,3 mm....
€71,69 €59,25 €65,95 €54,51
You save 8%
Ball joint taper 20 - 22,2 mm, M18 x 1,5, M24 x 1,5 L, 106 mm
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 L mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 22,2 mm. More
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 L mm. E: 20 mm. F: 22,2 mm. T...
€60,06 €49,64 €55,26 €45,67
You save 8%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€38,47 €31,79 €35,39 €29,25
You save 8%
Inlet valve engine Sisu 311-611 Valtra-Valmet
€113,89 €94,12 €104,78 €86,59
You save 8%
Valve Valtra-Valmet 355-1203
€99,04 €81,85 €91,12 €75,30
You save 8%
Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: white. Connection: Blade terminal... More
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 ...
€27,39 €22,63
Ball joint right and left M16 x 1,5, M24 x 1,5, taper 18 - 20 mm
A: 105 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18 mm. F: 20 mm. Taper: 18 - 20 mm. More
A: 105 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18 mm. F: 20 mm. Taper...
€39,87 €32,95 €36,68 €30,31
You save 8%
Ball joint 522 mm, M16 x 1,5, 22 mm
A: 522 mm. C: M16 x 1,5 mm. D: 22 mm. E: 18 mm. F: 20,2 mm. Taper: 18 - 20,2 mm. More
A: 522 mm. C: M16 x 1,5 mm. D: 22 mm. E: 18 mm. F: 20,2 mm. Taper: 18 ...
€69,02 €57,04 €63,50 €52,48
You save 8%
Repair set brake cylinder Valtra-Valmet, Fendt
€39,37 €32,54 €36,22 €29,93
You save 8%
Feed pump 3 hole, hole spacing 52 x 34 mm, flange 23 mm
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, Flange to lever end: 23 mm. More
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacin...
€121,09 €100,07 €111,40 €92,07
You save 8%
Turbocharger Valtra-Valmet 705
€1.272,56 €1.051,70 €1.219,51 €1.007,86
You save 4%
O-clamp set 115 x 3,5 mm Steyr, Massey Ferguson - 3 pieces
Dimensions: All rings 115 x 3.5 mm. More
Dimensions: All rings 115 x 3.5 mm.
€35,00 €28,93 €32,20 €26,61
You save 8%
HELLA Headlight left / right 12 / 24 V, H4, glass 164 x 103 mm, built-in Fendt
HELLA
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK / T4W. Fixing: 3-point mounting. Installation location: Left/right. Nominal voltage: 12 / 2... More
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK / T4W. Fixi...
€107,20 €88,60 €103,23 €85,32
You save 4%
Ball joint 100 mm, taper 16,2 - 18,3 mm, M14 x 1,5, M22 x 1,5
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2 - 18,3 mm. More
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 mm. E: 16,2 mm. F: 18,3 mm. T...
€71,69 €59,25 €65,95 €54,51
You save 8%
Ball joint 205 mm, M20 x 1,5, M22 x 1,5, taper 23,5 - 26,2 mm
A: 205 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,2 mm. Taper: 23,5 - 26,2 mm. More
A: 205 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,2 mm. T...
€73,47 €60,72 €67,59 €55,86
You save 8%
Axial joint 205 mm, M22 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
A: 205 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm. More
A: 205 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm.
€81,60 €67,44 €75,07 €62,04
You save 8%
Ball joint 220 mm, M22 x 1,5, M22 x 1,5, taper 23,5 - 26,4 mm
A: 220 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,4 mm. Taper: 23,5 - 26,4 mm. More
A: 220 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,4 mm. T...
€82,92 €68,53 €76,29 €63,05
You save 8%
Wheel brake cylinder Ø 34,92 mm, DOT 4, with piston rod Steyr 667, 680
Medium: DOT4. Hole Ø: 34.92 mm. Additional information: With piston rod. More
Medium: DOT4. Hole Ø: 34.92 mm. Additional information: With piston r...
€179,36 €148,23 €165,01 €136,37
You save 8%
Repair set clutch cylinder Valtra-Valmet, Steyr
€54,42 €44,98 €50,07 €41,38
You save 8%
Wheel brake cylinder K1, DOT 4 Valtra-Valmet Mezzo 6000-6900
€183,75 €151,86 €169,05 €139,71
You save 8%
Showing 1 - 48 of 66

Valmet 705 and Valtra 705 parts

Many of these tractors still wear Valmet on the bonnet, while parts lists often call the same machine the Valtra 705. It is one and the same type. This page has more than 60 replacement parts for the 705, from GRANIT, MAHLE, VDO, Cobo and HELLA.

Fuel, starting and engine

If the engine is slow to fire or dies under load, the feed pump is a sensible place to start. There are feed pumps and separate feed pump seals. A leaking seal draws in air, which means bleeding the system again after every stop. The stop cable is here as well: one that drags or no longer springs back fully can keep the engine from shutting off cleanly.

For starting and charging there are starter motors, alternators and connection cables. On the engine itself you will find a rear crankshaft seal, radiator hoses and a coolant temperature sensor, so the gauge reads correctly again.

Brakes, clutch and steering

For the brakes there are wheel brake cylinders and repair kits for the brake cylinder. A repair kit makes sense as long as the bore is smooth. Once pitting or rust shows inside, a complete new cylinder is the better choice. The clutch side has a clutch plate, and for the steering there are ball joints.

The electrical parts also include a flasher unit with holder and a headlight.

A tip on the crankshaft seal

Oil at the bottom between engine and clutch housing may well come from the rear crankshaft seal. Replace it while the clutch is out anyway, when it is only a small extra job. Check the running surface on the crankshaft: if there is a groove, set the new seal slightly deeper or shallower so the lip runs on a clean surface. Oil the lip lightly with engine oil and press the seal in straight and evenly. A seal fitted at an angle soon leaks again, and the oil ends up on your new clutch plate.

Finding the matching part

The type plate tells you whether the tractor is a 705, sometimes still under the Valmet name. Then compare the number on the old part with the description on this page. For a stop cable, measure the length of the old one, and for a radiator hose note whether it is the upper or lower.

The 705 belongs to the 05 series from Valtra and Valmet. The other types in that series each have their own page:

Brand-wide items are under Valtra parts.

Brands
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart