Menu
EUR

Valtra N 143 tractor parts & technical data

More than 110 parts fit the Valtra N 143 and they are all on this page. Think of trailer couplings, electrics and steering and front axle parts, for example.

116 parts found for Valtra-Valmet N 143
Show:
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 x 80 mm. Guide width: 30 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pat...
€638,19 €527,43
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.104,81 €913,07 €873,47 €721,88
You save 21%
DANA Spicer Plug front axle 745
€20,26 €16,75
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Scharmüller
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000 | Colour: AGCO grey | Guide width (mm): 30 | Rail width (mm): 335 | ... More
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
You save 4%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€630,05 €520,70 €579,65 €479,05
You save 8%
NOX sensor Massey Ferguson, Valtra-Valmet, Fendt
To fit: Massey Ferguson, Valtra-Valmet, Fendt. More
To fit: Massey Ferguson, Valtra-Valmet, Fendt.
€453,61 €374,88 €417,32 €344,89
You save 8%
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: consumer, 2: start, Installation dimension: Ø 16.5 mm, Without preheat... More
Version: 12 V, with 4 blade terminal connections, Switch positions: 0:...
€16,13 €13,33
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Walterscheid
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg, from 40 km/h 2,000 kg. More
Quick height adjustment with rotation lock, load capacity up to 40 km/...
€2.111,26 €1.744,84 €1.719,18 €1.420,81
You save 19%
Gear wheel main shaft 31 teeth Valtra-Valmet
Number of teeth: 31. More
Number of teeth: 31.
€423,24 €349,79 €389,38 €321,80
You save 8%
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: 12 V: 5-12 A, 24 V: 3-8 A, protection class: IP67, NC = normally close... More
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, powe...
€32,65 €26,98 €30,04 €24,82
You save 8%
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
Scharmüller
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version: Standard | Colour: AGCO grey | Load capacity (t): 3 | Length (mm): 4... More
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual...
€987,09 €815,78 €908,12 €750,51
You save 8%
Wiper motor Massey Ferguson, Valtra-Valmet
€223,30 €184,55 €205,44 €169,78
You save 8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Connection thread E: - More
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O...
€54,07 €44,69 €49,74 €41,11
You save 8%
Gear wheel planetary set rear axle 82 teeth Valtra-Valmet
€894,96 €739,64 €823,36 €680,47
You save 8%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.207,08 €997,59 €954,33 €788,70
You save 21%
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€583,34 €482,10 €536,67 €443,53
You save 8%
SANDEN Aircon compressor 12 V, Ø 119 mm, 6 grooves Valtra-Valmet
SANDEN
Fixing: DM | Refrigerant: R 134a | No. of grooves: 6 | Nominal voltage (V): 12 | Oil quantity (ccm): 190 | Suitable oil: SP 10 | Pulley Ø (mm): 119 More
Fixing: DM | Refrigerant: R 134a | No. of grooves: 6 | Nominal voltage...
€646,52 €534,31 €594,80 €491,57
You save 8%
Cooling fan Ø 600 mm Massey Ferguson, Valtra - Valmet
Ø: 600 mm. To fit: Massey Ferguson, Valtra - Valmet. More
Ø: 600 mm. To fit: Massey Ferguson, Valtra - Valmet.
€185,59 €153,38 €170,74 €141,11
You save 8%
Gas strut door 250 N, 345 mm, stroke 126 mm Massey Ferguson 4745ZN
suitable for: Tür. Newtons: 250. A: 345 mm. B: 175 mm. C: 8 mm. D: 8 mm. Form: 2. d1: 8 mm. d2: 18 mm. Stroke: 126 mm. Menke no.: 202912. More
suitable for: Tür. Newtons: 250. A: 345 mm. B: 175 mm. C: 8 mm. D: 8 ...
€34,26 €28,31 €31,52 €26,05
You save 8%
Alternator 12 V / 65 A Challenger, JCB, Massey Ferguson, Valtra-Valmet
Installation angle (°): l 60 | Charging current (A): 65 | Additional information: Connections B+ (M6-6.3), with W-connection, internal regulator | Di... More
Installation angle (°): l 60 | Charging current (A): 65 | Additional ...
€256,15 €211,69 €235,66 €194,76
You save 8%
Clutches set 7+7 Valtra-Valmet 6250 - 8950, C90 - XM150
€171,21 €141,50 €157,51 €130,18
You save 8%
DANA Spicer Wheel hub final drive front axle 730
€408,30 €337,44
Clutches set 9+9 Valtra-Valmet 6250 - 8950, C90 - XM150
€230,48 €190,48 €212,04 €175,24
You save 8%
SACHS Shock absorber rear, gas pressure MSE27/13X47A2 Valtra-Valmet
SACHS
Dimensions (mm): MSE27/13X47A2 | Installation location: Rear | Design: Gas pressure | To fit: Valtra | System: Twin-tube More
Dimensions (mm): MSE27/13X47A2 | Installation location: Rear | Design:...
€698,55 €577,31 €642,67 €531,13
You save 8%
DANA Spicer King pin final drive front axle 755
€114,51 €94,64 €105,35 €87,07
You save 8%
DANA Spicer Differential bevel gear final drive front axle 730
€244,50 €202,07 €224,94 €185,90
You save 8%
DANA Spicer Guard plate differential front axle 745
DANA Spicer Grooved nut bevel gear differential front axle 730
€82,27 €67,99 €75,69 €62,55
You save 8%
BorgWarner Turbocharger engine 49CWA Massey Ferguson, Valtra-Valmet
€2.110,32 €1.744,07 €2.022,35 €1.671,36
You save 4%
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€548,46 €453,27 €328,50 €271,49
You save 40%
Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
€331,16 €273,69 €304,67 €251,79
You save 8%
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Scharmüller
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail width (mm): 200 | D-value (kN): 10 | Colour: Black | Detent pin Ø (mm): ... More
Version: Standard | Category: Bearing supports | Guide width (mm): 25 ...
€668,46 €552,45 €614,98 €508,25
You save 8%
PTO shaft end piece 1 3/8 inch, 6 splines, 245 mm Valtra-Valmet
Version: 1 3/8"", 6 grooves | Length (mm): 245 More
Version: 1 3/8"", 6 grooves | Length (mm): 245
€415,22 €343,16 €382,00 €315,70
You save 8%
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
CARLISLE
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth More
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€17,19 €14,20
DANA Spicer O-ring as front axle 745, 4 g
€17,60 €14,55
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
DANA Spicer
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120 More
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€46,81 €38,69 €43,07 €35,59
You save 8%
DANA Spicer Intermediate bush as front axle 745, 120 x 127 x 40 mm
DANA Spicer
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40 | Outer Ø (mm): 127 More
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40...
€140,42 €116,05 €129,19 €106,77
You save 8%
Clutch plate set omkeerinrichting Valtra-Valmet
€486,96 €402,45 €448,00 €370,25
You save 8%
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
Scharmüller
suitable for: Valtra. Series: C-Serie. Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Dimensions: shaft height x width: 60 x 80 mm... More
suitable for: Valtra. Series: C-Serie. Category: Pick-up hitch. Versio...
€1.428,29 €1.180,41 €1.314,03 €1.085,97
You save 8%
BOSCH Pressure regulator CP4 Valtra-Valmet, Fendt, Massey Ferguson
€184,72 €152,66 €156,56 €129,39
You save 15%
Showing 1 - 48 of 116

Valtra N 143 parts for cooling, engine and drivetrain

When a Valtra N 143 starts running hot under load on a summer day, the cause is often a small part of the cooling system. This page lists more than 110 parts that fit the N 143, supplied by GRANIT and by brands including DANA Spicer, Scharmüller, Walterscheid and BOSCH.

Treat cooling as one system

Cooling parts for this tractor include thermostats, temperature sensors for common rail Sisu engines, a fan clutch and an electric cooling fan. They work as a team, so when temperature becomes a problem it pays to check them together instead of swapping a single part on a hunch.

A fan clutch is easy to test. With the engine cold, the fan should turn by hand with slight resistance. If it still spins just as freely once the engine is warm, the clutch is no longer engaging. A thermostat can be tested in a pan of water with a thermometer, so you can see at what temperature it opens.

Engine and turbo

Remanufactured turbochargers, gear reduction starters, seals for pressure pipes and O-rings for the oil filler cap fit the N 143 as well. Never run a turbo dry on start up. Prime it through the oil feed with clean engine oil before fitting, and make sure the intake side is clean.

When a turbo has failed, always track down why. A dirty air filter, stretched oil change intervals or a leaking intake hose will otherwise destroy the new unit in short order.

Drivetrain, cab and hitch

For the drivetrain there are gear wheels and differential bevel gears. Door locks fit the cab, and flood beam work lamps help with night work. At the rear you will find ball drawbars, separate ball inserts and adapter plates.

A ball that has worn oval gives a hard knock through the hitch when pulling away or braking. Replacing just the ball insert is less work than a complete drawbar, provided the rail and frame are still sound. When a differential bevel gear is worn, look at the neighbouring gears and thrust washers too, since they have carried the same load.

Choosing the right part

Use the serial number on the type plate as the basis. The N 143 is part of the N3 range from Valtra. To be completely sure, compare the reference number on the old part with the product details. For a thermostat, also check the opening temperature marked on the old one. For the fan clutch, compare the model designation on the plate with the tractor models named on the product.

Parts for other tractors in the range are on their own pages: Valtra N 103, Valtra N 113, Valtra N 123 and Valtra N 163. The full range for the brand is under Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart