Menu
EUR

Valtra 6200 tractor parts & technical data

Need parts for a Valtra 6200 or Valmet 6200? Choose from more than 150 items, such as steering and front axle parts, trailer couplings and lighting.

155 parts found for Valtra-Valmet 6200
Show:
FEBI Feed pump 5 hole, 25/37 mm / 45 mm, flange 52 mm Valtra-Valmet
FEBI
To fit as: Valtra - Valmet 6200, 6300, 6400, 6600, 6800, 8000, 8050, 8150, 8450, 8550, 8750 More
To fit as: Valtra - Valmet 6200, 6300, 6400, 6600, 6800, 8000, 8050, 8...
€164,27 €135,76 €69,09 €57,10
You save 58%
GRANIT Master brake cylinder K1, DOT 4, Valtra-Valmet, Case IH
€132,08 €109,16 €125,45 €103,68
You save 5%
GRANIT Repair set brake cylinder without piston Valtra-Valmet, Deutz-Fahr
GRANIT
Additional information: Without piston. More
Additional information: Without piston.
€43,06 €35,59 €40,90 €33,80
You save 5%
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€561,80 €464,30
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.058,75 €875,00 €873,45 €721,86
You save 18%
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
SANDEN
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connection: A2 | Nominal voltage (V): 12 | Pulley Ø (mm): 132 | Menke no.: 67... More
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a ...
€562,03 €464,49 €533,90 €441,24
You save 5%
GRANIT Ball joint 220 mm, M22 x 1,5, M22 x 1,5, taper 23,5 - 26,4 mm
GRANIT
A: 220 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,4 mm. Taper: 23,5 - 26,4 mm. More
A: 220 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,4 mm. T...
€79,46 €65,67 €75,45 €62,36
You save 5%
Carraro Bronze bearing Ø 53 x 48 x 40 mm Massey Ferguson, Case IH, New Holland
Carraro
Outer Ø: 53 mm. Inner Ø: 48 mm. Length: 40 mm. More
Outer Ø: 53 mm. Inner Ø: 48 mm. Length: 40 mm.
€14,60 €12,07
GRANIT Wheel brake cylinder K1, DOT 4 Valtra-Valmet Mezzo 6000-6900
€176,09 €145,53 €167,25 €138,22
You save 5%
GRANIT Repair set brake cylinder Valtra-Valmet, Fendt
€37,73 €31,18 €35,80 €29,59
You save 5%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€36,87 €30,47 €35,00 €28,93
You save 5%
Optibelt V-belt Massey Ferguson 3120, 5425-5460, 6180, 6445, 6455
€34,61 €28,60 €32,85 €27,15
You save 5%
Crankshaft seal for Ø 58 x 80 x 12 mm Massey Ferguson
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm. More
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm.
€14,80 €12,23
Cylinder head gasket engine Sisu 420
€146,11 €120,75 €138,80 €114,71
You save 5%
Bosch/Rexroth Double pump 25 + 11 cm³/rpm., left, Valmet spline DIN 5480
Bosch/Rexroth
Output volume: 25 + 11 cc/rev. Drive shaft: Special Valmet splining DIN 5480. Direction of rotation: Anticlockwise. Bosch no.: 0510766313. More
Output volume: 25 + 11 cc/rev. Drive shaft: Special Valmet splining DI...
€1.286,39 €1.063,13 €1.222,00 €1.009,92
You save 5%
Door lock, right Fendt Farmer 240 S (Typ 294), GT 395
€54,33 €44,90 €51,60 €42,64
You save 5%
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.294,08 €1.069,49 €1.089,95 €900,79
You save 16%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.221,12 €1.009,19 €1.028,50 €850,00
You save 16%
GRANIT Seal kit Valtra-Valmet C 90 - 150, M 120-150, T 120-190
€86,97 €71,88 €82,60 €68,26
You save 5%
BOSCH Sensor hydraulic pressure lifting height
BOSCH
Version: Lifting height. More
Version: Lifting height.
€355,33 €293,66 €314,26 €259,72
You save 12%
FLEETGUARD Hydraulic oil filter HF35322
€99,05 €81,86 €89,60 €74,05
You save 10%
MAHLE Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
MAHLE
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø (mm): - | Additional information: Compact alternator, dust-tight | Mounting L /... More
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø...
€372,69 €308,01 €232,90 €192,48
You save 38%
Showing 25 - 48 of 155

Valtra 6200 parts

Turbocharger, water pump and exhaust

The heavy jobs on a Valtra 6200, also sold as the Valmet 6200, tend to be on the engine. Among the more than 150 parts on this page are remanufactured turbochargers, seals between the exhaust manifold and the turbo, a water pump repair kit, O-rings for the lift pump and alternators.

New turbochargers usually fail for the same reason the old one did: lack of oil. Before connecting a replacement, fill its oil inlet with clean engine oil, change the engine oil and filter, and make sure the oil return line is clear. After the first start, let the engine idle for a minute before putting load on it. Always fit a new manifold gasket at the same time.

The water pump repair kit makes sense as long as the housing is sound. If the shaft has noticeable bearing play, a complete pump is the better choice.

Steering, clutch and cab

  • ball joints and separate balls for the steering
  • seal kits and bolt sets for the second control valve
  • clutch plates from LUK, among others
  • door locks, work lamps, indicator position lights and flasher units
  • drawbar balls from Scharmüller and Walterscheid

The remaining items come from DANA Spicer and GRANIT.

An alternator that stops charging is not always at fault. Measure the battery voltage with the engine running and check the belt and charge cable first. Only when those are in order does the regulator or alternator come into question. When changing a ball joint, count the turns as you remove the old one so the toe-in stays roughly the same, then have it measured anyway.

A flasher unit ticking too fast often means a blown bulb somewhere. Replace the unit only once every bulb checks out.

Hardened O-rings on the lift pump let air into the fuel system, so the engine starts poorly or dies under load. Renew them at the next filter change and bleed the system carefully.

Valmet or Valtra, how to get it right

Because the same tractor was sold under two names, the identification plate with the serial number is the place to start. Turbochargers and alternators usually carry a label or engraved number of their own, which lets you compare old and new side by side.

The 6200 sits in the Mezzo range. The other Mezzo models covered here are:

Older and larger tractors of the make are all under Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart