Menu
EUR

Valtra 6550 tractor parts & technical data

Steering and front axle, electrics and trailer couplings: the more than 140 parts on this page fit the Valtra 6550, which you may also know as the Valmet 6550.

148 parts found for Valtra-Valmet 6550
Show:
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
DANA Spicer
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120 More
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€46,81 €38,69 €43,07 €35,59
You save 8%
DANA Spicer Intermediate bush as front axle 745, 120 x 127 x 40 mm
DANA Spicer
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40 | Outer Ø (mm): 127 More
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40...
€140,42 €116,05 €129,19 €106,77
You save 8%
HELLA Alternator 14 V, 120 A Fendt, Valtra-Valmet
HELLA
Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal voltage (V): 14 More
Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal...
€554,78 €458,50 €427,45 €353,26
You save 23%
Clutch plate set omkeerinrichting Valtra-Valmet
€486,96 €402,45 €448,00 €370,25
You save 8%
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 254 mm, clockwise
€510,93 €422,26 €306,01 €252,90
You save 40%
Silencer at exhaust pipe hood Valtra-Valmet Mezzo, HiTech
€394,25 €325,83 €362,71 €299,76
You save 8%
Bolt set 1ste steering valve 3x M8 x 90
Technical data: 3x M8 x 90. More
Technical data: 3x M8 x 90.
€18,40 €15,21
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Colour: Black. Description: This product is a b... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.152,79 €1.779,17 €1.702,02 €1.406,63
You save 21%
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€77,66 €64,18 €71,45 €59,05
You save 8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 475, 484, 584, 674, 684, 784, 884 385, 485, 485XL, 585, 585XL, 685, 685... More
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 4...
€48,67 €40,22 €44,78 €37,01
You save 8%
Aircon compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil
Reference no.: QP7H15-8024 | Suitable oil: PAG 46 | For compressor: 7H15 | Nominal voltage (V): 12 | Pulley Ø (mm): 132 | Fixing: EM | Oil quantity (... More
Reference no.: QP7H15-8024 | Suitable oil: PAG 46 | For compressor: 7H...
€357,93 €295,81 €329,30 €272,15
You save 8%
DANA Spicer Sealing ring final drive front axle 755, 40 x 65 x 18 mm
DANA Spicer
Dimensions (mm): 40 x 65 x 18 More
Dimensions (mm): 40 x 65 x 18
€33,83 €27,96 €31,12 €25,72
You save 8%
Ball joint 260 mm, taper 24 - 26 mm, M20 x 1,5 / M24 x 1,5
A: 260 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 260 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€82,15 €67,89 €75,58 €62,46
You save 8%
Ball joint 295 mm, M24 x 1,5, M22 x 1,5, taper 29 - 32,2 mm
A: 295 mm. C: M24 x 1,5 mm. D: M22 x 1,5 mm. E: 29 mm. F: 32,2 mm. Taper: 29 - 32,2 mm. More
A: 295 mm. C: M24 x 1,5 mm. D: M22 x 1,5 mm. E: 29 mm. F: 32,2 mm. Tap...
€103,69 €85,69 €95,39 €78,84
You save 8%
Injection nozzle Case IH CS 100-150, Steyr 9105-9145, Valtra-Valmet
Type formula: ADB145M34447. More
Type formula: ADB145M34447.
€40,71 €33,64 €37,45 €30,95
You save 8%
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF. More
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€33,85 €27,98
Bolt set 2de steering valve 3x M8 x 130
Technical data: 3x M8 x 130. Description: For 1st Control unit. More
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€15,63 €12,91
Door lock, left Massey Ferguson, Case IH, Steyr
€49,57 €40,97 €45,60 €37,69
You save 8%
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.349,76 €1.115,50 €1.183,18 €977,84
You save 12%
Internal plate PTO clutch Ø 133,4 x 93 mm, 1,8 mm, 45 teeth
Version: Thickness: 1.8 mm, inner: 93 mm, outer: 133.4 mm, 45 splines More
Version: Thickness: 1.8 mm, inner: 93 mm, outer: 133.4 mm, 45 splines
€23,45 €19,38
DANA Spicer Differential bevel gear final drive front axle 725
€107,79 €89,08 €103,30 €85,38
You save 4%
Ball joint 210 mm, M22 x 1,5 mm, M24 x 1,5 mm
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. More
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm.
€62,32 €51,50 €57,33 €47,38
You save 8%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€38,47 €31,79 €35,39 €29,25
You save 8%
Injection nozzle engine 620DSL, 612DS Valtra, Massey Ferguson
€224,74 €185,74 €206,76 €170,88
You save 8%
Seal kit top and bottom Valtra-Valmet Mezzo 6000-6850
€441,37 €364,77 €406,06 €335,59
You save 8%
Cylinder head bolt 12 x 140 mm Massey Ferguson, Case IH, Steyr
Dimensions: M12 x 140 mm. More
Dimensions: M12 x 140 mm.
€15,23 €12,58
Connecting rod bolt 85 mm Valtra-Valmet, Case IH, Steyr
Dimensions: 85 mm long. More
Dimensions: 85 mm long.
€42,51 €35,13 €39,11 €32,32
You save 8%
Door lock, left Fendt Farmer 240 S (Typ 294), GT 395
€59,42 €49,11 €54,67 €45,18
You save 8%
Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: white. Connection: Blade terminal... More
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 ...
€27,39 €22,63
BOSCH Sensor hydraulic pressure lifting height
BOSCH
Version: Lifting height. More
Version: Lifting height.
€370,79 €306,44 €314,26 €259,72
You save 15%
Seal kit hydraulic steering
€226,79 €187,43 €208,65 €172,44
You save 8%
Repair set brake cylinder Valtra-Valmet, Fendt
€39,37 €32,54 €36,22 €29,93
You save 8%
Thermostat Ø 67 mm, 83 °C
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€39,55 €32,69 €36,39 €30,07
You save 8%
Optibelt V-belt Massey Ferguson 3120, 5425-5460, 6180, 6445, 6455
€36,11 €29,84 €33,22 €27,46
You save 8%
Feed pump 5 hole, hole spacing 25/37 and 45 mm, flange 52 mm
Version: 5 holes, Vertical hole spacing: 25/37 mm, Horizontal hole spacing: 45 mm, Flange to lever end: 52 mm. Menke no.: 209000. More
Version: 5 holes, Vertical hole spacing: 25/37 mm, Horizontal hole spa...
€44,86 €37,07 €41,27 €34,11
You save 8%
Door lock, right Fendt Farmer 240 S (Typ 294), GT 395
€56,69 €46,85 €52,15 €43,10
You save 8%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.116,48 €922,71
Indicator/position light yellow, white, 170 x 63,5 x 60,3 mm, left / right
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 170 mm. Form: Rectangular. Height: 53,5 mm. Dimensions W x H x D: 170 x 63,5 x 60,3 ... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 170 ...
€34,72 €28,69 €31,94 €26,40
You save 8%
HELLA Headlight left / right 12 / 24 V, H4, glass 164 x 103 mm, built-in Fendt
HELLA
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK / T4W. Fixing: 3-point mounting. Installation location: Left/right. Nominal voltage: 12 / 2... More
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK / T4W. Fixi...
€107,20 €88,60 €103,23 €85,32
You save 4%
Showing 49 - 96 of 148

Valtra 6550 parts, also sold as the Valmet 6550

Plenty of owners still call it the Valmet 6550, and that name turns up in workshop paperwork as often as Valtra does. This page holds more than 140 Valtra 6550 parts from GRANIT, DANA Spicer, Scharmüller, Walterscheid and GRAMMER, from seal kits and turbochargers to door locks, ball joints and work lamps.

Engine and turbo

Engine parts include remanufactured turbochargers, exhaust manifold seals at the turbo, engine sensors and alternators. Most turbo failures after a swap come down to oil supply. Clean or replace the oil feed line, pour a little fresh engine oil into the turbo oil inlet, and let the engine idle for a while before putting it under load. Always use a new seal between the turbo and the manifold, since a reused one soon leaks exhaust gas.

Cab and lights

For the cab there are tractor seats, including air suspended models, and door locks for left and right. Lighting parts include work lamps, indicator and position lights and flasher units. If the indicators suddenly flash at double speed, check for a blown bulb before you replace the flasher unit.

Steering, driveline and hitch

For the steering and front axle there are ball joints, balls, bolt sets for the steering valve and seal kits. O-rings are listed too, including ones for the feed pump and the differential. At the rear there are ball drawbars for the rail.

Seal kits and the steering valve

When something on the 6550 starts to weep, it is tempting to change only the ring that is visibly leaking. A complete seal kit puts every seal in that assembly back at the same age, so you are not back a few months later for the one you left in. Work as cleanly as you can, because a single grain of grit behind a new seal will score the running surface on the first stroke. For the steering valve there are bolt sets. Tighten the bolts on a valve like this in a cross pattern and in stages so the body sits evenly on its seal without distorting. If the steering feels heavy after the job, check that the valve is not binding before looking elsewhere.

Finding the right fit

Take the serial number from the type plate and compare it with the reference number on the old part. With the 6550 that check is worth doing, because some parts carry the Valmet name and others Valtra. Other models from the Hitech range have their own pages: Valtra 6350, Valtra 6750 and Valtra 6850. The Valtra 8950 belongs to the same series. If another Valtra shares the yard with this 6550, look under Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart