Menu
EUR

Valtra 6850 tractor parts & technical data

The Valtra 6850, also known as the Valmet 6850, has its own page here with more than 130 parts for steering and front axle, trailer couplings and electrics.

137 parts found for Valtra-Valmet 6850
Show:
Aircon compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil
Reference no.: QP7H15-8024 | Suitable oil: PAG 46 | For compressor: 7H15 | Nominal voltage (V): 12 | Pulley Ø (mm): 132 | Fixing: EM | Oil quantity (... More
Reference no.: QP7H15-8024 | Suitable oil: PAG 46 | For compressor: 7H...
€357,93 €295,81 €329,30 €272,15
You save 8%
DANA Spicer Sealing ring final drive front axle 755, 40 x 65 x 18 mm
DANA Spicer
Dimensions (mm): 40 x 65 x 18 More
Dimensions (mm): 40 x 65 x 18
€33,83 €27,96 €31,12 €25,72
You save 8%
Ball joint 260 mm, taper 24 - 26 mm, M20 x 1,5 / M24 x 1,5
A: 260 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 260 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€82,15 €67,89 €75,58 €62,46
You save 8%
Ball joint 295 mm, M24 x 1,5, M22 x 1,5, taper 29 - 32,2 mm
A: 295 mm. C: M24 x 1,5 mm. D: M22 x 1,5 mm. E: 29 mm. F: 32,2 mm. Taper: 29 - 32,2 mm. More
A: 295 mm. C: M24 x 1,5 mm. D: M22 x 1,5 mm. E: 29 mm. F: 32,2 mm. Tap...
€103,69 €85,69 €95,39 €78,84
You save 8%
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF. More
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€33,85 €27,98
Bolt set 2de steering valve 3x M8 x 130
Technical data: 3x M8 x 130. Description: For 1st Control unit. More
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€15,63 €12,91
Door lock, left Massey Ferguson, Case IH, Steyr
€49,57 €40,97 €45,60 €37,69
You save 8%
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.349,76 €1.115,50 €1.183,18 €977,84
You save 12%
Internal plate PTO clutch Ø 133,4 x 93 mm, 1,8 mm, 45 teeth
Version: Thickness: 1.8 mm, inner: 93 mm, outer: 133.4 mm, 45 splines More
Version: Thickness: 1.8 mm, inner: 93 mm, outer: 133.4 mm, 45 splines
€23,45 €19,38
DANA Spicer Differential bevel gear final drive front axle 725
€107,79 €89,08 €103,30 €85,38
You save 4%
Ball joint 210 mm, M22 x 1,5 mm, M24 x 1,5 mm
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. More
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm.
€62,32 €51,50 €57,33 €47,38
You save 8%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€38,47 €31,79 €35,39 €29,25
You save 8%
Injection nozzle engine 620DSL, 612DS Valtra, Massey Ferguson
€224,74 €185,74 €206,76 €170,88
You save 8%
Seal kit top and bottom Valtra-Valmet Mezzo 6000-6850
€441,37 €364,77 €406,06 €335,59
You save 8%
Cylinder head bolt 12 x 140 mm Massey Ferguson, Case IH, Steyr
Dimensions: M12 x 140 mm. More
Dimensions: M12 x 140 mm.
€15,23 €12,58
Connecting rod bolt 85 mm Valtra-Valmet, Case IH, Steyr
Dimensions: 85 mm long. More
Dimensions: 85 mm long.
€42,51 €35,13 €39,11 €32,32
You save 8%
Door lock, left Fendt Farmer 240 S (Typ 294), GT 395
€59,42 €49,11 €54,67 €45,18
You save 8%
Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: white. Connection: Blade terminal... More
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 ...
€27,39 €22,63
BOSCH Sensor hydraulic pressure lifting height
BOSCH
Version: Lifting height. More
Version: Lifting height.
€370,79 €306,44 €314,26 €259,72
You save 15%
Seal kit hydraulic steering
€226,79 €187,43 €208,65 €172,44
You save 8%
Repair set brake cylinder Valtra-Valmet, Fendt
€39,37 €32,54 €36,22 €29,93
You save 8%
Thermostat Ø 67 mm, 83 °C
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€39,55 €32,69 €36,39 €30,07
You save 8%
Optibelt V-belt Massey Ferguson 3120, 5425-5460, 6180, 6445, 6455
€36,11 €29,84 €33,22 €27,46
You save 8%
Feed pump 5 hole, hole spacing 25/37 and 45 mm, flange 52 mm
Version: 5 holes, Vertical hole spacing: 25/37 mm, Horizontal hole spacing: 45 mm, Flange to lever end: 52 mm. Menke no.: 209000. More
Version: 5 holes, Vertical hole spacing: 25/37 mm, Horizontal hole spa...
€44,86 €37,07 €41,27 €34,11
You save 8%
Door lock, right Fendt Farmer 240 S (Typ 294), GT 395
€56,69 €46,85 €52,15 €43,10
You save 8%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.116,48 €922,71
Seal kit Valtra-Valmet C 90 - 150, M 120-150, T 120-190
€90,76 €75,01 €83,50 €69,01
You save 8%
Indicator/position light yellow, white, 170 x 63,5 x 60,3 mm, left / right
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 170 mm. Form: Rectangular. Height: 53,5 mm. Dimensions W x H x D: 170 x 63,5 x 60,3 ... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 170 ...
€34,72 €28,69 €31,94 €26,40
You save 8%
HELLA Headlight left / right 12 / 24 V, H4, glass 164 x 103 mm, built-in Fendt
HELLA
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK / T4W. Fixing: 3-point mounting. Installation location: Left/right. Nominal voltage: 12 / 2... More
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK / T4W. Fixi...
€107,20 €88,60 €103,23 €85,32
You save 4%
Seal kit hydraulic steering
€353,13 €291,84 €324,88 €268,50
You save 8%
Ball joint 205 mm, M20 x 1,5, M22 x 1,5, taper 23,5 - 26,2 mm
A: 205 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,2 mm. Taper: 23,5 - 26,2 mm. More
A: 205 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,2 mm. T...
€73,47 €60,72 €67,59 €55,86
You save 8%
Axial joint 205 mm, M22 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
A: 205 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm. More
A: 205 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm.
€81,60 €67,44 €75,07 €62,04
You save 8%
Ball joint 220 mm, M22 x 1,5, M22 x 1,5, taper 23,5 - 26,4 mm
A: 220 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,4 mm. Taper: 23,5 - 26,4 mm. More
A: 220 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,4 mm. T...
€82,92 €68,53 €76,29 €63,05
You save 8%
Universal joint 30,2 x 82 mm, maintenance-free
A: 30,2 mm. B: 82 mm. Universal joint size: . Lubrication system: Maintenance-free. More
A: 30,2 mm. B: 82 mm. Universal joint size: . Lubrication system: Main...
€169,57 €140,14 €156,00 €128,93
You save 8%
Wheel brake cylinder Ø 34,92 mm, DOT 4, with piston rod Steyr 667, 680
Medium: DOT4. Hole Ø: 34.92 mm. Additional information: With piston rod. More
Medium: DOT4. Hole Ø: 34.92 mm. Additional information: With piston r...
€179,36 €148,23 €165,01 €136,37
You save 8%
Hand brake cable 937 mm Valtra-Valmet Mezzo, Mega, HiTech, C
€198,99 €164,45 €183,07 €151,30
You save 8%
Wheel brake cylinder K1, DOT 4 Valtra-Valmet Mezzo 6000-6900
€183,75 €151,86 €169,05 €139,71
You save 8%
Brake disc Ø 224 mm, 27 teeth, thickness 5 mm, 50 km/h, for ceramic
Notes: Please check the rear axle version and take this into account when ordering.. More
Notes: Please check the rear axle version and take this into account w...
€40,13 €33,16
Showing 49 - 96 of 137

Valtra 6850 parts, Valmet 6850 included

If the bonnet of your 6850 still says Valmet rather than Valtra, you are in the right place all the same. It is the same tractor from the Hitech range with a different name on the bonnet. This page holds more than 130 replacement parts that fit this model, from GRANIT, DANA Spicer, Scharmüller, Walterscheid and MAHLE.

Engine and exhaust

For the engine there are seal kits, valve cover gaskets and piston ring sets from MAHLE, plus an engine speed sensor. Before new piston rings go on, check the end gap of each ring inside its own cylinder. On the exhaust side you will find seals for the exhaust manifold at the turbocharger and silencers.

A tip on that manifold seal: clean both faces back to bare metal with no trace of the old gasket, then tighten the nuts in several stages working crosswise. Let the engine warm up and check that they are still tight. A manifold with a small leak gives itself away as a ticking noise under throttle, and it blows hot gas past the turbo.

Steering, hitch and driveline

The front axle is covered by ball joints and a bolt set for the steering valve. At the rear there are ball drawbars and separate balls, from Scharmüller and Walterscheid among others. For the driveline there are O-rings, for instance for the differential and the feed pump.

Lighting and cab

Work lamps, combined indicator and position lights and a flasher unit keep the tractor visible on the road. For the cab there are door locks. A stiff lock is worth a little graphite or light oil before you replace it. If you convert the lights to LED, bear in mind that a conventional flasher unit will blink too fast with the lower load, so choose a unit designed for it.

Getting the fit right

The rating plate shows the model whether the tractor left the factory as a Valtra or a Valmet. Go by that, since each model in the Hitech range has a page of its own. If the old part carries a number, use it to compare with the parts on this page. With door locks and lamps, check the side as well.

These models from the same range have their own pages, useful when more than one Valtra works on the farm:

The Valtra 8950 belongs to this range too. For that model and every other one, start at Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart