Menu
EUR

Valtra 8050 tractor parts & technical data

Steering and front axle, trailer couplings and electrics: the Valtra 8050 from the Mega series has more than 160 parts here. They also fit the Valmet 8050.

162 parts found for Valtra-Valmet 8050
Show:
Door lock, left Massey Ferguson, Case IH, Steyr
€47,50 €39,26 €45,10 €37,27
You save 5%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.214,60 €1.003,80 €954,30 €788,68
You save 21%
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 254 mm, clockwise
€489,63 €404,65 €306,00 €252,89
You save 38%
Stop cable 2250 / 2015 mm Valtra-Valmet 205-8600
A: 2250 mm. B: 2015 mm. More
A: 2250 mm. B: 2015 mm.
€32,75 €27,07
GRANIT Bolt set 1ste steering valve 3x M8 x 90
GRANIT
Technical data: 3x M8 x 90. More
Technical data: 3x M8 x 90.
€17,60 €14,55
GRANIT Bolt set 2de steering valve 3x M8 x 130
GRANIT
Technical data: 3x M8 x 130. Description: For 1st Control unit. More
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€14,95 €12,36
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.675,85 €1.385,00 €1.382,55 €1.142,60
You save 18%
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 168 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load cap...
€889,04 €734,74 €748,81 €618,85
You save 16%
FEBI Feed pump 5 hole, 25/37 mm / 45 mm, flange 52 mm Valtra-Valmet
FEBI
To fit as: Valtra - Valmet 6200, 6300, 6400, 6600, 6800, 8000, 8050, 8150, 8450, 8550, 8750 More
To fit as: Valtra - Valmet 6200, 6300, 6400, 6600, 6800, 8000, 8050, 8...
€164,27 €135,76 €69,09 €57,10
You save 58%
GRANIT Master brake cylinder K1, DOT 4, Valtra-Valmet, Case IH
€132,08 €109,16 €125,45 €103,68
You save 5%
GRANIT Repair set brake cylinder without piston Valtra-Valmet, Deutz-Fahr
GRANIT
Additional information: Without piston. More
Additional information: Without piston.
€43,06 €35,59 €40,90 €33,80
You save 5%
Heating element
€233,98 €193,37 €222,25 €183,68
You save 5%
Engine preheater, complete connection Ø 40 mm, press
Connection: Ø 40 mm press fitting. More
Connection: Ø 40 mm press fitting.
€427,72 €353,49 €406,30 €335,79
You save 5%
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€561,80 €464,30
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.058,75 €875,00 €873,45 €721,86
You save 18%
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
SANDEN
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connection: A2 | Nominal voltage (V): 12 | Pulley Ø (mm): 132 | Menke no.: 67... More
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a ...
€562,03 €464,49 €533,90 €441,24
You save 5%
HELLA Alternator 14 V, 120 A Fendt, Valtra-Valmet
HELLA
Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal voltage (V): 14 More
Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal...
€531,65 €439,38 €427,40 €353,22
You save 20%
GRANIT Ball joint 220 mm, M22 x 1,5, M22 x 1,5, taper 23,5 - 26,4 mm
GRANIT
A: 220 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,4 mm. Taper: 23,5 - 26,4 mm. More
A: 220 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,4 mm. T...
€79,46 €65,67 €75,45 €62,36
You save 5%
Carraro Bronze bearing Ø 53 x 48 x 40 mm Massey Ferguson, Case IH, New Holland
Carraro
Outer Ø: 53 mm. Inner Ø: 48 mm. Length: 40 mm. More
Outer Ø: 53 mm. Inner Ø: 48 mm. Length: 40 mm.
€14,60 €12,07
GRANIT Wheel brake cylinder K1, DOT 4 Valtra-Valmet Mezzo 6000-6900
€176,09 €145,53 €167,25 €138,22
You save 5%
Showing 25 - 48 of 162

Valtra 8050 parts for the cab, engine and hitch

Many owners still call it the Valmet 8050, and both names refer to the same tractor from the Mega range. This page lists more than 160 Valtra 8050 parts, all new and supplied by makers such as GRANIT, DANA Spicer, Scharmüller, GRAMMER and Walterscheid.

Engine sealing and cooling

On the engine side you will find thermostats with their gaskets, a water pump gasket, valve cover seals and engine sensors. If the 8050 is leaking oil at the differential or the feed pump, there are O-rings and seal kits for that. Bolt sets, repair kits and clutch plates complete this group. Always fit a thermostat with a fresh gasket and the right way round, with the bleed hole at the top.

A practical tip for the stop cable: when the engine no longer shuts down with the knob, trace the old cable before you replace it. It often binds at a tight bend where it passes through the bulkhead. Route the new one in gentle curves, so it moves easily and the inner wire lasts. With engine sensors, check the plug and wiring for corrosion first, since a green contact gives the same fault as a dead sensor. If the indicators suddenly flash at double speed, look for a blown bulb before blaming the flasher unit.

Seat, doors, lights and towing

Air suspended tractor seats, including models from GRAMMER, replace a seat that has given up. Door locks sort out a cab door that no longer latches, and flasher units fix indicators that blink too fast or not at all. At the back there are drawbars with a ball hitch for the rail.

An air suspended seat needs power for its compressor, so check the cab socket has a supply before you fit it, and set the suspension to your own weight before heading out. When you fit a new door lock, grease the hinges and striker plate at the same time and the door will close softly again.

Identifying the right part

Your type plate shows the exact model, badged as either Valmet or Valtra. For seal kits and clutch plates, the reference number on the old part is the best guide. Compare it with the numbers shown with the item so you get the size that matches.

Other Mega models

If another Mega tractor shares the yard with your 8050, each model has a page of its own with the parts that fit it:

For every other model from the brand, start at Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart