Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Valtra 8550 tractor parts & technical data

You may know the Valtra 8550 from the Mega series as the Valmet 8550. More than 140 parts fit, from steering and front axle to trailer couplings and lighting.

147 parts found for Valtra-Valmet 8550
Show:
LUK Single clutch 360TGFR Eicher 3024 - 3145, Valtra-Valmet 8050 - 8550
€476,14 €393,50 €438,05 €362,02
You save 8%
Ball joint 260 mm, taper 24 - 26 mm, M20 x 1,5 / M24 x 1,5
A: 260 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 260 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€82,15 €67,89 €75,58 €62,46
You save 8%
Ball joint 295 mm, M24 x 1,5, M22 x 1,5, taper 29 - 32,2 mm
A: 295 mm. C: M24 x 1,5 mm. D: M22 x 1,5 mm. E: 29 mm. F: 32,2 mm. Taper: 29 - 32,2 mm. More
A: 295 mm. C: M24 x 1,5 mm. D: M22 x 1,5 mm. E: 29 mm. F: 32,2 mm. Tap...
€103,69 €85,69 €95,39 €78,84
You save 8%
Injection nozzle Case IH CS 100-150, Steyr 9105-9145, Valtra-Valmet
Type formula: ADB145M34447. More
Type formula: ADB145M34447.
€40,71 €33,64 €37,45 €30,95
You save 8%
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF. More
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€33,85 €27,98
Reman turbocharger Case IH, Steyr, Valtra-Valmet, Massey Ferguson
€2.163,70 €1.788,18 €2.073,50 €1.713,64
You save 4%
Door lock, left Massey Ferguson, Case IH, Steyr
€49,57 €40,97 €45,60 €37,69
You save 8%
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.349,76 €1.115,50 €1.183,18 €977,84
You save 12%
Stop cable 2015 / 2250 mm Valtra-Valmet 205-905, 6000-8750
To fit as: Valtra - Valmet 205, 305, 365, 405, 465, 505, 600, 605, 665, 700, 705, 805, 865, 900, 905, 6000, 6100, 6300, 6400, 6600, 6800, 8000, 8100, ... More
To fit as: Valtra - Valmet 205, 305, 365, 405, 465, 505, 600, 605, 665...
€34,18 €28,24
Internal plate PTO clutch Ø 133,4 x 93 mm, 1,8 mm, 45 teeth
Version: Thickness: 1.8 mm, inner: 93 mm, outer: 133.4 mm, 45 splines More
Version: Thickness: 1.8 mm, inner: 93 mm, outer: 133.4 mm, 45 splines
€23,45 €19,38
Ball joint 210 mm, M22 x 1,5 mm, M24 x 1,5 mm
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. More
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm.
€62,32 €51,50 €57,33 €47,38
You save 8%
Borg Warner Cooling fan Ø 600 mm Valtra-Valmet Mega 8400-8750, T 120 - T 191
€231,44 €191,27 €194,69 €160,90
You save 16%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€38,47 €31,79 €35,39 €29,25
You save 8%
Injection nozzle engine 620DSL, 612DS Valtra, Massey Ferguson
€224,74 €185,74 €206,76 €170,88
You save 8%
Cylinder head bolt 12 x 140 mm Massey Ferguson, Case IH, Steyr
Dimensions: M12 x 140 mm. More
Dimensions: M12 x 140 mm.
€15,23 €12,58
Connecting rod bolt 85 mm Valtra-Valmet, Case IH, Steyr
Dimensions: 85 mm long. More
Dimensions: 85 mm long.
€42,51 €35,13 €39,11 €32,32
You save 8%
Cylinder head gasket set upper Case IH, Steyr, New Holland
€231,31 €191,17 €212,81 €175,87
You save 8%
Bolt set 2de steering valve 3x M8 x 130
Technical data: 3x M8 x 130. Description: For 1st Control unit. More
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€15,63 €12,91
Door lock, left Fendt Farmer 240 S (Typ 294), GT 395
€59,42 €49,11 €54,67 €45,18
You save 8%
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 168 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load cap...
€839,65 €693,93 €812,85 €671,77
You save 3%
Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: white. Connection: Blade terminal... More
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 ...
€27,39 €22,63
BOSCH Sensor hydraulic pressure lifting height
BOSCH
Version: Lifting height. More
Version: Lifting height.
€370,79 €306,44 €314,26 €259,72
You save 15%
Seal kit hydraulic steering
€226,79 €187,43 €208,65 €172,44
You save 8%
Repair set brake cylinder Valtra-Valmet, Fendt
€39,37 €32,54 €36,22 €29,93
You save 8%
Borg Warner Fan clutch Ø 600 mm Valtra-Valmet Mega 8400-8750
€262,50 €216,94 €250,92 €207,37
You save 4%
Connecting rod bolt TX star 58 mm Valtra-Valmet engine Sisu 320-634
Thermostat Ø 67 mm, 83 °C
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€39,55 €32,69 €36,39 €30,07
You save 8%
Feed pump 5 hole, hole spacing 25/37 and 45 mm, flange 52 mm
Version: 5 holes, Vertical hole spacing: 25/37 mm, Horizontal hole spacing: 45 mm, Flange to lever end: 52 mm. Menke no.: 209000. More
Version: 5 holes, Vertical hole spacing: 25/37 mm, Horizontal hole spa...
€44,86 €37,07 €41,27 €34,11
You save 8%
O-clamp set 115 x 3,5 mm Steyr, Massey Ferguson - 3 pieces
Dimensions: All rings 115 x 3.5 mm. More
Dimensions: All rings 115 x 3.5 mm.
€35,00 €28,93 €32,20 €26,61
You save 8%
Door lock, right Fendt Farmer 240 S (Typ 294), GT 395
€56,69 €46,85 €52,15 €43,10
You save 8%
Lift rod Valtra Mezzo 6000-6900, Mega 8000-8550
€273,87 €226,34 €251,96 €208,23
You save 8%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.116,48 €922,71
Seal kit Valtra-Valmet C 90 - 150, M 120-150, T 120-190
€90,76 €75,01 €83,50 €69,01
You save 8%
Indicator/position light yellow, white, 170 x 63,5 x 60,3 mm, left / right
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 170 mm. Form: Rectangular. Height: 53,5 mm. Dimensions W x H x D: 170 x 63,5 x 60,3 ... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 170 ...
€34,72 €28,69 €31,94 €26,40
You save 8%
HELLA Headlight left / right 12 / 24 V, H4, glass 164 x 103 mm, built-in Fendt
HELLA
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK / T4W. Fixing: 3-point mounting. Installation location: Left/right. Nominal voltage: 12 / 2... More
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK / T4W. Fixi...
€107,20 €88,60 €103,23 €85,32
You save 4%
Seal kit hydraulic steering
€353,13 €291,84 €324,88 €268,50
You save 8%
Ball joint 205 mm, M20 x 1,5, M22 x 1,5, taper 23,5 - 26,2 mm
A: 205 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,2 mm. Taper: 23,5 - 26,2 mm. More
A: 205 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,2 mm. T...
€73,47 €60,72 €67,59 €55,86
You save 8%
Axial joint 205 mm, M22 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
A: 205 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm. More
A: 205 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm.
€81,60 €67,44 €75,07 €62,04
You save 8%
Showing 49 - 96 of 147

Valtra 8550 parts

Some of these tractors carry the Valmet name, others say Valtra, but a Valmet 8550 and a Valtra 8550 are the same machine. This page brings together more than 140 Valtra 8550 parts, so whichever badge yours wears, you are in the right place.

What you can get for the 8550

  • Steering: ball joints and seal kits for the front axle
  • Engine: valve cover seals, O-rings for the lift pump, the upper radiator hose, a thermostat and its gasket
  • Driveline: clutch plates, partly from LUK, along with parts from DANA Spicer and Walterscheid
  • Controls: bolt sets for the second control valve and a stop cable
  • Cab and lights: left hand door locks, work lamps, indicator position lights and flasher units
  • Hitch: drawbar balls from Scharmüller and GRANIT

Practical notes from the workshop

Always fit a new thermostat with a new gasket. A gasket that has already been compressed will not seal properly and soon starts to weep. Bleed the cooling system carefully after refilling and top up once the engine has warmed up and cooled down again.

Changing a ball joint almost always upsets the toe-in. Count the turns as you unscrew the old joint, screw the new one in by the same number and then have the alignment checked. It saves a lot of tyre wear.

If the indicators flash too fast or not at all while the bulbs are fine, the flasher unit is the first thing to suspect.

When the clutch plate comes out, inspect the flywheel too. Grooves, blue spots or fine cracks in the friction face make a new plate wear faster or judder when pulling away, so have it skimmed if needed. A stiff stop cable can sometimes be freed with a little oil, but if the outer sheath is cracked, moisture will keep getting in and a new cable is the better fix. On the valve cover seal, tighten the bolts evenly and not too hard, or you squeeze the seal out of shape.

Matching the part and related models

With two names in circulation, the identification plate and serial number are your most reliable guide. For engine and clutch parts, compare the reference number on the part you removed.

The 8550 belongs to the Valtra Mega range. These models have their own pages:

Every other Valtra and Valmet model is listed under Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart