Menu
EUR

Valtra 8950 tractor parts & technical data

A Hitech series tractor known under two names: the Valtra 8950 and the Valmet 8950. Either way, more than 130 parts fit it, from steering to lighting.

131 parts found for Valtra-Valmet 8950
Show:
Scharmüller Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
3%
Scharmüller
Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 ...
€899,63 €743,50 €871,22 €720,02
 
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
3%
Scharmüller
Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 ...
€839,65 €693,93 €812,85 €671,77
 
Work lamp flood beam H3, 55 W, 12 V, 150 x 98 x 89 mm
8%
Work lamp flood beam H3, 55 W, 12 V, 150 x 98 x 89 mm
Bulb: H3. Form: Rectangular. Material: Housing: plastic, lens: glass. Dimensions...
€55,15 €45,58 €50,74 €41,93
 
Carraro Bronze bearing Ø 53 x 48 x 40 mm Massey Ferguson, Case IH, New Holland
Carraro
Bronze bearing Ø 53 x 48 x 40 mm Massey Ferguson, Case IH, New Holland
Outer Ø: 53 mm. Inner Ø: 48 mm. Length: 40 mm.
€15,23 €12,58
 
Hand brake cable 1005 mm Valtra-Valmet HiTech, C, M, N, T, X, XM
8%
Hand brake cable 1005 mm Valtra-Valmet HiTech, C, M, N, T, X, XM
Length: 1005 mm.
€210,23 €173,74 €193,41 €159,84
 
Shim brake type 700/750, 9,5 inch Valtra-Valmet
8%
Shim brake type 700/750, 9,5 inch Valtra-Valmet
€101,77 €84,11 €93,63 €77,38
 
Brake disc Ø 224 mm, 27 teeth, 4,8 mm thick, organic Valtra-Valmet
8%
Brake disc Ø 224 mm, 27 teeth, 4,8 mm thick, organic Valtra-Valmet
Dimensions: Ø 224, 4.8 thick, 27 splines mm.
€75,25 €62,19 €69,23 €57,21
 
Starter ring gear Ø 405/373 mm, 133 teeth Valtra-Valmet
8%
Starter ring gear Ø 405/373 mm, 133 teeth Valtra-Valmet
Version: Ø 405/373 mm, 133 teeth.
€224,52 €185,55 €206,56 €170,71
 
VICTOR REINZ Cylinder head gasket set engine 620, 634, 66ET/A, 74ETA Valtra-Valmet
8%
VICTOR REINZ
Cylinder head gasket set engine 620, 634, 66ET/A, 74ETA Valtra-Valmet
€351,29 €290,32 €323,19 €267,10
 
Seal for return lubrication line
Seal for return lubrication line
€10,90 €9,01
 
Oil cooler Massey Ferguson series 3000-7200
8%
Oil cooler Massey Ferguson series 3000-7200
€357,89 €295,78 €329,26 €272,11
 
Inlet valve engine Sisu 320-620
8%
Inlet valve engine Sisu 320-620
€38,19 €31,56 €35,13 €29,04
 
Piston ring set 3 rings Ø 108 mm, 3 mm trapezoidal ring / 3 mm / 4 mm
8%
Piston ring set 3 rings Ø 108 mm, 3 mm trapezoidal ring / 3 mm / 4 mm
Dimensions: 3 rings, Ø 108 mm, 3 mm (trapezoidal ring) / 3 mm / 4 mm.
€48,73 €40,27 €44,83 €37,05
 
Valve cover gasket engine Sisu 320D
Valve cover gasket engine Sisu 320D
€24,46 €20,22
 
Water pump Valtra-Valmet HiTech 8950
8%
Water pump Valtra-Valmet HiTech 8950
€497,72 €411,34 €457,90 €378,43
 
Door lock, right Massey Ferguson, Case IH, Steyr
8%
Door lock, right Massey Ferguson, Case IH, Steyr
€49,57 €40,97 €45,60 €37,69
 
Starter switch with 2 keys
8%
Starter switch with 2 keys
€73,12 €60,43 €67,27 €55,60
 
Indicator/position light left / right rectangular, 12V21WK / P21W
Indicator/position light left / right rectangular, 12V21WK / P21W
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Form: Rectangular. Installation locati...
€40,64 €33,58
 
FLEETGUARD Hydraulic oil filter HF35322
8%
FLEETGUARD
Hydraulic oil filter HF35322
€96,95 €80,12 €89,19 €73,71
 
Gasket manifold for turbocharger 162000110800, 47107834
8%
Gasket manifold for turbocharger 162000110800, 47107834
€33,19 €27,43 €30,53 €25,24
 
Oil sump gasket Massey Ferguson, Case IH, Steyr, New Holland
8%
Oil sump gasket Massey Ferguson, Case IH, Steyr, New Holland
€77,54 €64,08 €71,34 €58,96
 
Oil drain valve M18 x 1,5
8%
Oil drain valve M18 x 1,5
Thread: M18 x 1.5.
€68,16 €56,33 €62,71 €51,82
 
Main bearing standard Ø 85 mm
8%
Main bearing standard Ø 85 mm
€50,48 €41,72 €46,44 €38,38
 
Intake manifold gasket Massey Ferguson, Case IH, Steyr, New Holland
8%
Intake manifold gasket Massey Ferguson, Case IH, Steyr, New Holland
€54,38 €44,94 €50,03 €41,35
 
Showing 97 - 131 of 131

Valtra 8950 parts for brakes, engine and cab

On plenty of farms it still goes by Valmet 8950, and that is the same tractor from the Hitech range. This page brings together more than 130 Valtra 8950 parts, from GRANIT and from makers such as Scharmüller, Walterscheid, DANA Spicer and MAHLE.

Brakes and driveline

For the brakes there are brake discs. Replace them as a set per axle, and when the housing is open look at the intermediate plates and at the oil in the brake housing as well. Burnt oil or metal particles tell you how hard the old discs have been working. For the differential there are O-rings, and a complete seal kit helps when a housing is weeping in several places.

On top of the engine

Engine work covers a valve cover gasket, seals for the valve cover bolts, a thermostat and a water pump gasket. A tip for the valve cover: tighten the bolts in a crosswise pattern and with feel. Overtightening pushes the gasket out of shape, and the cover then leaks worse than before. A bolt set comes in handy when the old bolts are stretched or corroded.

Cab, lights and hitch

If the door no longer latches properly, there is a left-hand door lock. For lighting there are work lamps, indicator and position lights and a flasher unit. At the rear you will find a drawbar ball and separate balls. Ball joints for the steering complete the list, and if you hear a click at the front axle when rocking the steering wheel, they are the first suspects.

With a thermostat, never reuse the gasket or seal. Scrape the housing face clean without scoring it, and refill the cooling system slowly after fitting so no air pocket gets trapped behind the thermostat. An air pocket can push the temperature up even though the new thermostat works perfectly.

The right part for the 8950

Whether the bonnet says Valtra or Valmet, the type plate settles the exact model. Next, the number on the part you removed is what counts, matched against the reference number for the product. With brake discs, lay the old disc next to the new one and compare the teeth.

More tractors from the Hitech range have a page of their own. If one of them works alongside your 8950, its matching parts are there:

The full brand is under Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart