Running a Valtra 900, also known as the Valmet 900? This page lists more than 100 matching parts, such as trailer couplings, electrics and lighting.
Whether the decal says Valmet 900 or Valtra 900, it is the same tractor, and the Valtra 900 parts on this page fit it under either name. More than 100 of them are listed, from GRANIT and from makers such as DANA Spicer, Walterscheid, MAHLE and LUK.
A good share of what an engine rebuild needs can be found here. That includes valve cover gaskets, seal sets and connecting rod bolts, seals and O-rings for the feed pump, and repair kits for the water pump. A turbocharger is available as a remanufactured Reman unit.
Two habits from the workshop are worth keeping. Never reuse connecting rod bolts during an overhaul, since tightening takes them into their stretch range and they cannot be trusted a second time. When fitting the turbocharger, prime it with clean engine oil through the oil inlet and make sure both the supply and the return line are clear before the first start, so the bearings never run dry.
An indicator that suddenly flashes twice as fast usually points to a blown bulb on one side, so check the lamps before replacing the flasher unit.
When a new air conditioning compressor goes in, have the receiver drier replaced and the system pulled into vacuum before it is recharged. Moisture and debris left behind by the failed compressor will otherwise circulate and damage the new one within a season. The water pump repair kit is a sensible option when the housing and bearing seat are still in good shape.
Because the tractor carries two brand names, the reference number on the old part is often the quickest route to a match. Look for it on the water pump or compressor housing, around the edge of a gasket or on the plate of the turbocharger. If it has worn away, compare shape, connections and fitting side.
Other tractors from the same range have their own pages, which is useful if you run more than one Valtra:
Every other model of the brand is listed under Valtra parts.