Menu
EUR

Valtra A 85 tractor parts & technical data

Trailer couplings, electrics and lighting for the Valtra A 85 come together here. With more than 100 parts for the A series you can search by your model.

104 parts found for Valtra-Valmet A 85
Show:
GRANIT Alternator 14 V / 95 A, flange 56 mm Valtra-Valmet
5%
GRANIT
Alternator 14 V / 95 A, flange 56 mm Valtra-Valmet
Belt tension hole Ø / R (mm): 8,2 / 86,0 | Nominal voltage (V): 14 | Mounting L ...
€252,07 €208,32 €239,45 €197,89
 
Alternator 14 V / 65 A, pulley-Ø 80 mm, flange 82 mm Valtra-Valmet
5%
Alternator 14 V / 65 A, pulley-Ø 80 mm, flange 82 mm Valtra-Valmet
Form: A | Installation angle (°): l 60 | Mounting hole Ø / R (mm): 8,2 / 86,0 | ...
€227,53 €188,04 €216,15 €178,64
 
GRANIT Tie rod 5 notches taper 16,2 - 18,3 mm, 310 mm, M14 x 1,5
5%
GRANIT
Tie rod 5 notches taper 16,2 - 18,3 mm, 310 mm, M14 x 1,5
A: 310 mm. C: M14 x 1,5 mm. D: 18 mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2 - 18,3...
€76,34 €63,09 €72,50 €59,92
 
Indicator/position light yellow, white, 170 x 63,5 x 60,3 mm, left / right
10%
Indicator/position light yellow, white, 170 x 63,5 x 60,3 mm, left / right
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 170 mm. Form: ...
€34,93 €28,87 €31,60 €26,12
 
GRANIT Thrust bearing 1,76 kg Massey Ferguson 4435 - 4455, Valtra-Valmet
5%
GRANIT
Thrust bearing 1,76 kg Massey Ferguson 4435 - 4455, Valtra-Valmet
€168,92 €139,60 €160,45 €132,60
 
Showing 97 - 104 of 104

Valtra A 85 parts

With a turbocharged engine, air conditioning and a fair amount of cab electrics, the Valtra A 85 has plenty that can wear. More than 100 parts are listed for it here. Rather than going item by item, this page walks round the tractor.

Engine bay

Under the hood there are remanufactured turbochargers, water pumps and valve cover gaskets, plus seals for the exhaust manifold at the turbo. In the fuel system you will find the O-ring for the feed pump. The alternator is made for Valtra-Valmet, as is the aircon compressor with its twin groove pulley.

Whenever you replace the turbo, fit a new manifold seal with it. Inspect the oil feed and return lines as well, because a blocked or kinked line is often what killed the old unit. Prime the new turbo with clean engine oil through the feed port before the first start, and let the engine idle for the first minute.

Cab, lighting and steering

Inside the cab there are door locks, GRAMMER tractor seats and a flasher unit with holder. Outside you will find work lamps, including a flood beam, and rectangular indicator and position lights. Ball joints for the steering come from DANA Spicer among others.

Hitching up

Drawbar frames and ball type drawbars from Scharmüller and Walterscheid handle the towing side. With a frame, rail width is what counts, as it has to match the guide on your tractor.

Aircon compressor and water pump

Replacing an aircon compressor follows a set order. Have the system recovered by a qualified workshop first, fit a new receiver drier along with the compressor, and flush the lines if the old one failed internally. Metal debris left in the circuit will quickly ruin the new compressor. Check the compressor oil quantity before the system is recharged.

A water pump announces its end with coolant at the weep hole under the shaft or a whining bearing. Fit a new gasket with it, refill with fresh coolant and bleed the system thoroughly.

Confirming the fit

Check the type plate to be sure you have an A 85. On a turbocharger, aircon compressor or alternator, the part number is usually on a tag or cast into the housing. Compare it with the details of the item and you will know it fits.

The A 85 is one of the Valtra A series. These sister models have their own pages:

Every Valtra and Valmet model is grouped under Valtra onderdelen.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart