Menu
EUR

Valtra M 150 tractor parts & technical data

What fits a Valtra M 150? This page answers that with more than 120 parts, including trailer couplings, electrics and steering and front axle parts.

114 parts found for Valtra-Valmet M 150
Show:
Connecting rod bolt TX star 58 mm Valtra-Valmet engine Sisu 320-634
Oil cooler Massey Ferguson series 3000-7200
€357,89 €295,78 €329,26 €272,11
You save 8%
Inlet valve engine Sisu 320-620
€38,19 €31,56 €35,13 €29,04
You save 8%
Piston ring set 3 rings Ø 108 mm, 3 mm trapezoidal ring / 3 mm / 4 mm
Dimensions: 3 rings, Ø 108 mm, 3 mm (trapezoidal ring) / 3 mm / 4 mm. More
Dimensions: 3 rings, Ø 108 mm, 3 mm (trapezoidal ring) / 3 mm / 4 mm.
€48,73 €40,27 €44,83 €37,05
You save 8%
Seal kit upper engine Sisu 420D
€251,28 €207,67 €231,18 €191,06
You save 8%
Door lock, right Massey Ferguson, Case IH, Steyr
€49,57 €40,97 €45,60 €37,69
You save 8%
Starter switch with 2 keys
€73,12 €60,43 €67,27 €55,60
You save 8%
FLEETGUARD Hydraulic oil filter HF35322
€96,95 €80,12 €89,19 €73,71
You save 8%
Oil drain valve M18 x 1,5
Thread: M18 x 1.5. More
Thread: M18 x 1.5.
€68,16 €56,33 €62,71 €51,82
You save 8%
Main bearing standard Ø 85 mm
€50,48 €41,72 €46,44 €38,38
You save 8%
Sensor engine speed 6485-8480
Version: Engine speed. More
Version: Engine speed.
€177,54 €146,73
Showing 97 - 114 of 114

Valtra M 150 parts

The Valtra M 150 from the M series is a tractor that contractors and larger dairy farms run all year round. More than 120 parts fit it, from GRANIT, Scharmüller, DANA Spicer, Walterscheid and Cobo.

Lights and indicators

There are headlights, work lamps and LED headlights with dipped and main beam. A flasher unit with holder and indicator warning is listed too. If you are switching to LED lights, be aware that a standard flasher unit often reads the lower current draw of LED lamps as a failed bulb and starts flashing fast. In that case, fit a flasher that is rated for LED.

Ball hitch and drawbar

For heavy haulage there are ball drawbars, separate ball inserts and adapter plates. On a ball hitch, the ball is what wears first. Check it with a caliper from time to time and make sure the hold down still closes firmly. If you can feel play between ball and drawbar eye, replace the ball insert before the rest of the hitch starts to suffer.

Engine and sealing

Engine parts include a thermostat, an engine speed sensor and a crankshaft seal. Sealing rings, oil O-rings, seal kits and an exhaust seal for the turbocharger manifold are also listed. For the cab there is a door lock.

An engine speed sensor that throws fault codes is not always faulty. Take it out and look at the tip. If it is coated with metal swarf or oily sludge, clean it and refit it with the correct gap to the toothed wheel. Only if the fault returns is replacement the next step. A new thermostat always gets a new seal, and after refilling you let the engine warm up with the heater open so the air can escape from the cooling system.

A door lock that sticks or no longer latches is a familiar annoyance in the cab. If the spring or the mechanism is worn, replace the lock as a whole, since piecemeal repairs rarely last. Fit the crankshaft seal with the lip facing the oil and check that the running surface on the crankshaft is smooth.

Checking your tractor

In our shop the M 150 appears under the brand name Valtra-Valmet. The serial plate confirms that the tractor is this model and not another one from the M series. If the old part has a number on it, compare it with the reference number listed with the product, which is the safest check for seals.

All other models from the brand are on Valtra parts, each with a page of its own.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart