Menu
EUR

Valtra N 101 tractor parts & technical data

This is the parts page for the Valtra N 101 in the N1 series. It has more than 140 items, including trailer couplings, electrics and lighting.

146 parts found for Valtra-Valmet N 101
Show:
Mirror 330 x 240 mm, heated, rod-Ø 16 - 22 mm Massey Ferguson
Dimensions: 330 x 240 mm. Height: 330 mm. Width: 240 mm. Version: Heated. Notes: Electric adjustment. Rod Ø: 16 - 22 mm. More
Dimensions: 330 x 240 mm. Height: 330 mm. Width: 240 mm. Version: Heat...
€209,98 €173,54 €193,18 €159,65
You save 8%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.116,48 €922,71
Cobo Headlight left / right 12 V, built-in, screw fixing
Cobo
Nominal voltage: 12 V. Installation location: Left, right. Bulb: 12V55W / H4, 12V4WK / T4W. Bulbs included: No. Light function: Dipped beam, full beam... More
Nominal voltage: 12 V. Installation location: Left, right. Bulb: 12V55...
€100,76 €83,27 €92,70 €76,61
You save 8%
HELLA Headlight left / right 12 / 24 V, H4, glass 164 x 103 mm, built-in Fendt
HELLA
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK / T4W. Fixing: 3-point mounting. Installation location: Left/right. Nominal voltage: 12 / 2... More
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK / T4W. Fixi...
€107,20 €88,60 €103,23 €85,32
You save 4%
Wheel brake cylinder Ø 34,92 mm, DOT 4, with piston rod Steyr 667, 680
Medium: DOT4. Hole Ø: 34.92 mm. Additional information: With piston rod. More
Medium: DOT4. Hole Ø: 34.92 mm. Additional information: With piston r...
€179,36 €148,23 €165,01 €136,37
You save 8%
Wheel brake cylinder K1, DOT 4 Valtra-Valmet Mezzo 6000-6900
€183,75 €151,86 €169,05 €139,71
You save 8%
Borg Warner Fan clutch M30 x 2 L, hole spacing-Ø 96,77 mm Valtra-Valmet
Borg Warner
Thread: M30 x 2 L. PCD: 96,77 mm. More
Thread: M30 x 2 L. PCD: 96,77 mm.
€292,68 €241,88 €246,21 €203,48
You save 16%
Water pump engine Sisu 33, 44, 49 Massey Ferguson, Valtra-Valmet, Fendt
Valve cover gasket Steyr, Case IH, Massey Ferguson, Valtra-Valmet
Crankshaft seal for Ø 58 x 80 x 12 mm Massey Ferguson
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm. More
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm.
€15,49 €12,80
Cylinder head gasket engine Sisu 420
€152,46 €126,00 €140,26 €115,92
You save 8%
Scharmüller Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
Scharmüller
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 148 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load cap...
€899,63 €743,50 €871,22 €720,02
You save 3%
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.748,75 €1.445,25 €1.382,58 €1.142,63
You save 21%
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 168 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load cap...
€839,65 €693,93 €812,85 €671,77
You save 3%
Work lamp flood beam H3, 55 W, 12 V, 150 x 98 x 89 mm
Bulb: H3. Form: Rectangular. Material: Housing: plastic, lens: glass. Dimensions W x H x D: 150 x 98 x 89 mm. Installation location: Left/right. Nomin... More
Bulb: H3. Form: Rectangular. Material: Housing: plastic, lens: glass. ...
€55,15 €45,58 €50,74 €41,93
You save 8%
Pressure sensor thread 1 x 7,0 mm
Thread: 1 x 7.0 mm. Menke no.: 210301. More
Thread: 1 x 7.0 mm. Menke no.: 210301.
€35,67 €29,48 €32,82 €27,12
You save 8%
Hand brake cable 1005 mm Valtra-Valmet HiTech, C, M, N, T, X, XM
€210,23 €173,74 €193,41 €159,84
You save 8%
Master brake cylinder K1, DOT 4, Valtra-Valmet A 83 - T 152
€212,75 €175,83 €195,73 €161,76
You save 8%
Brake disc Ø 224 mm, 27 teeth, 4,8 mm thick, organic Valtra-Valmet
Dimensions: Ø 224, 4.8 thick, 27 splines mm. More
Dimensions: Ø 224, 4.8 thick, 27 splines mm.
€75,25 €62,19 €69,23 €57,21
You save 8%
Starter ring gear Ø 405/373 mm, 133 teeth Valtra-Valmet
Version: Ø 405/373 mm, 133 teeth. More
Version: Ø 405/373 mm, 133 teeth.
€224,52 €185,55 €206,56 €170,71
You save 8%
Repair set brake cylinder without piston Valtra-Valmet, Deutz-Fahr
Additional information: Without piston. More
Additional information: Without piston.
€44,94 €37,14 €41,34 €34,17
You save 8%
Connecting rod bolt TX star 58 mm Valtra-Valmet engine Sisu 320-634
Belt tensioner Ø 75 mm, width 46,5 mm, Massey Ferguson and Fendt
Outer Ø: 75 mm. Width: 46,5 mm. More
Outer Ø: 75 mm. Width: 46,5 mm.
€117,22 €96,88
Oil cooler Massey Ferguson series 3000-7200
€357,89 €295,78 €329,26 €272,11
You save 8%
Inlet valve engine Sisu 320-620
€38,19 €31,56 €35,13 €29,04
You save 8%
Piston ring set 3 rings Ø 108 mm, 3 mm trapezoidal ring / 3 mm / 4 mm
Dimensions: 3 rings, Ø 108 mm, 3 mm (trapezoidal ring) / 3 mm / 4 mm. More
Dimensions: 3 rings, Ø 108 mm, 3 mm (trapezoidal ring) / 3 mm / 4 mm.
€48,73 €40,27 €44,83 €37,05
You save 8%
Seal kit upper engine Sisu 420D
€251,28 €207,67 €231,18 €191,06
You save 8%
Water alarm
€59,82 €49,44 €55,03 €45,48
You save 8%
Rail pressure valve Valtra-Valmet N 101 - T 202, Massey Ferguson
€119,26 €98,56 €109,72 €90,68
You save 8%
Door lock, right Massey Ferguson, Case IH, Steyr
€49,57 €40,97 €45,60 €37,69
You save 8%
Starter switch with 2 keys
€73,12 €60,43 €67,27 €55,60
You save 8%
FLEETGUARD Hydraulic oil filter HF35322
€96,95 €80,12 €89,19 €73,71
You save 8%
Oil drain valve M18 x 1,5
Thread: M18 x 1.5. More
Thread: M18 x 1.5.
€68,16 €56,33 €62,71 €51,82
You save 8%
Showing 97 - 144 of 146

Valtra N 101 parts for turbo, engine and lighting

Blue smoke or a whistle under acceleration on a Valtra N 101 often means the turbo or a seal on the exhaust side has had its day. This page lists more than 140 parts for the N 101, from GRANIT and from brands such as DANA Spicer, Scharmüller, Walterscheid and GRAMMER.

Turbo and engine

For the engine there are remanufactured turbochargers, exhaust manifold seals at the turbo, upper engine seal kits, crankshaft seals and complete pistons. Radiator hoses cover the cooling side.

Before a new turbocharger goes on, change the engine oil and filter and prime the turbo through the oil feed with clean oil. Let the engine idle for a moment without touching the throttle, so the bearings are lubricated before the turbo spins up. Always fit a new seal between manifold and turbo, as a used one will leak and whistle.

A radiator hose that cracks near the clamps or feels hard should come off before it gives up on a hot day, ideally with new clamps.

Lights and indicators

Lighting parts include H4 headlights, LED headlights with dipped and main beam, flood beam work lamps and a flasher unit. If the indicators suddenly flash twice as fast, a bulb on that side has usually failed or a holder has poor contact. Only when every bulb and earth point checks out is the flasher unit itself the suspect.

Switching to LED headlights puts more light on the road while drawing less current. Aim them properly after fitting so you do not dazzle oncoming traffic.

Cab, air conditioning and hitch

Door locks and a tractor seat fit the cab, and there is an aircon compressor for the climate system. Run the air conditioning for a few minutes now and then during winter, which keeps the compressor seals supple and saves you a leak in spring. A stiff door lock often frees up with a little dry lubricant, but if the door no longer latches securely, a new lock is the safer fix. At the rear you will find ball drawbars and separate balls to replace one that has worn.

Choosing parts for your N 101

Your first step is the serial number on the type plate. Valtra places the N 101 in its N1 range, which helps when a part lists several models. Also take the reference number from the old part and compare it with the product details. For engine parts, the number on the engine block gives extra certainty.

From the same range there are pages for the Valtra N 91, Valtra N 111, Valtra N 121 and Valtra N 141, handy when you look after several Valtra tractors. Everything for the brand is under Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart