Menu
EUR

Valtra N 141 tractor parts & technical data

This page is devoted to the Valtra N 141 of the N1 series, with more than 130 matching parts. Trailer couplings, electrics and lighting are among them.

132 parts found for Valtra-Valmet N 141
Show:
PROBOSS Seat PROBOSS AS4550 air suspended 12 V, 550 mm, seat heater
PROBOSS
Seat PROBOSS AS4550 air suspended 12 V, 550 mm, seat heater
On-board voltage: 12 V. Upholstery type: Fabric. Seat contact switch: Optional. ...
€1.868,20 €1.543,97
 
GRAMMER Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
GRAMMER
Tractor seat air suspended Maximo Professional fabric, seat width 530 mm
Super comfort seat with low-frequency air suspension and 12V compressor. APS: au...
€1.941,20 €1.604,30
 
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
38%
MAHLE
Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€525,60 €434,38 €328,45 €271,45
 
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
5%
Cobo
Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning lig...
€55,70 €46,03 €52,90 €43,72
 
GRAMMER Tractor seat Maximo Dynamic DDS MSG95AL/741 air suspended Steyr
GRAMMER
Tractor seat Maximo Dynamic DDS MSG95AL/741 air suspended Steyr
Suspension: Air suspension. Upholstery type: Fabric. Track gauge: 260 mm. Seat w...
€2.726,80 €2.253,55
 
GRAMMER Tractor seat Maximo Professional MSG95AL/731 air suspended
GRAMMER
Tractor seat Maximo Professional MSG95AL/731 air suspended
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Option...
€3.867,45 €3.196,24
 
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
10%
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€124,89 €103,21 €112,95 €93,35
 
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Scharmüller
Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000...
€1.228,70 €1.015,45
 
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: ...
€39,10 €32,31
 
GRANIT LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
10%
GRANIT
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€78,15 €64,59 €70,70 €58,43
 
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
21%
Walterscheid
Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg,...
€2.124,41 €1.755,71 €1.669,15 €1.379,46
 
Belt tensioner Ø 75 mm, width 46,5 mm, Massey Ferguson and Fendt
Belt tensioner Ø 75 mm, width 46,5 mm, Massey Ferguson and Fendt
Outer Ø: 75 mm. Width: 46,5 mm.
€117,20 €96,86
 
Collet set Valtra-Valmet 255-865
Collet set Valtra-Valmet 255-865
€5,45 €4,50
 
DANA Spicer Wheel hub final drive front axle 730
DANA Spicer
Wheel hub final drive front axle 730
€408,25 €337,40
 
Scharmüller Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
12%
Scharmüller
Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 ...
€907,50 €750,00 €802,55 €663,26
 
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
21%
Walterscheid
Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€2.166,20 €1.790,25 €1.702,00 €1.406,61
 
HELLA Headlight left / right 12 / 24 V, H4, glass 164 x 103 mm, built-in Fendt
HELLA
Headlight left / right 12 / 24 V, H4, glass 164 x 103 mm, built-in Fendt
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK / T4W. Fixing: 3-poin...
€103,20 €85,29
 
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
5%
Wabco
Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10
€586,12 €484,40 €556,80 €460,17
 
Inlet valve engine Sisu 320-620
5%
Inlet valve engine Sisu 320-620
€36,60 €30,25 €34,75 €28,72
 
LUK Torsion damper Valtra-Valmet C90 - C150, M120 - M150, N82 - N142
5%
LUK
Torsion damper Valtra-Valmet C90 - C150, M120 - M150, N82 - N142
€767,99 €634,70 €729,55 €602,93
 
Seal kit hydraulic steering
5%
Seal kit hydraulic steering
€162,31 €134,14 €154,15 €127,40
 
GRANIT Oil drain valve M18 x 1,5
5%
GRANIT
Oil drain valve M18 x 1,5
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
 
Door lock, left Massey Ferguson, Case IH, Steyr
5%
Door lock, left Massey Ferguson, Case IH, Steyr
€47,50 €39,26 €45,10 €37,27
 
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
18%
Walterscheid
Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.675,85 €1.385,00 €1.382,55 €1.142,60
 
Showing 1 - 24 of 132

Valtra N 141 parts for engine, cooling and electrics

On a Valtra N 141, much of the work happens under the bonnet. A good share of the more than 130 parts on this page concern the engine and its surroundings: a remanufactured turbocharger, the seal between exhaust manifold and turbo, engine seal kits, crankshaft seals and cylinder head bolts. For cooling and climate there are radiator hoses and air conditioning compressors.

Working on the turbo and cylinder head

When you fit a turbocharger, always renew the manifold seal at the same time. An old gasket that has already been compressed once will not seal properly, and an exhaust leak at the turbo costs pulling power and coats the engine bay in soot. Check the oil feed and return lines for dirt or kinks, and pour a little clean engine oil into the turbo oil inlet before the first start. Then let the engine idle first, so the bearings are lubricated before you open the throttle.

Any work on the cylinder head calls for new cylinder head bolts. They are loaded into their stretch range when tightened and cannot be reused reliably. Tighten them in the prescribed order and in several stages.

Cab, lights and hitching

Outside the engine bay you will find cab door locks, flasher units, headlights, including LED headlights with dipped and main beam, and flood beam work lamps. For the driver there are GRAMMER tractor seats. At the rear there are ball drawbars and separate balls, from makers such as Scharmüller and Walterscheid. A stiff door lock often gets a second life with a little penetrating oil and some working back and forth. Only replace it when the latch no longer catches. If an indicator suddenly flashes at double speed, a bulb has usually failed. If nothing flashes at all while bulbs and fuse are fine, the flasher unit is the first suspect.

The right part for your N 141

Check the type plate to confirm that it really is an N 141, and keep the old part next to you. The reference number on a turbocharger, compressor or headlight is the quickest way to the matching replacement. With hoses, shape matters: a radiator hose for the top connection has a different bend from the one for the bottom.

From the same N range, the Valtra N 91, Valtra N 101, Valtra N 111 and Valtra N 121 each have their own page with the parts for that model. To look further across the brand, go to Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart