Menu
EUR

Valtra N 141 tractor parts & technical data

This page is devoted to the Valtra N 141 of the N1 series, with more than 130 matching parts. Trailer couplings, electrics and lighting are among them.

132 parts found for Valtra-Valmet N 141
Show:
GRANIT Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
€317,36 €262,28 €301,45 €249,13
You save 5%
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.675,85 €1.385,00 €1.382,55 €1.142,60
You save 18%
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 168 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load cap...
€889,04 €734,74 €748,81 €618,85
You save 16%
LUK Torsion damper Valtra-Valmet C90 - C150, M120 - M150, N82 - N142
€767,99 €634,70 €729,55 €602,93
You save 5%
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 80 mm, 417 mm, bore 26 mm
Scharmüller
suitable for: Valtra. Series: C-Serie. Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Dimensions: shaft height x width: 60 x 80 mm... More
suitable for: Valtra. Series: C-Serie. Category: Pick-up hitch. Versio...
€1.375,55 €1.136,82
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€561,80 €464,30
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.058,75 €875,00 €873,45 €721,86
You save 18%
Hydraulic lifting strut 540 - 650 mm, clevis / ball joint
D (mm): 70 | C (mm): 35 | L (mm): 540 - 650 | To fit: Valtra & Valmet | Type: Clevis joint/ball joint | S1 (mm): 32 | A (mm): 40 | B (mm): 28 More
D (mm): 70 | C (mm): 35 | L (mm): 540 - 650 | To fit: Valtra & Valmet ...
€616,36 €509,39 €585,50 €483,88
You save 5%
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
SANDEN
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connection: A2 | Nominal voltage (V): 12 | Pulley Ø (mm): 132 | Menke no.: 67... More
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a ...
€562,03 €464,49 €533,90 €441,24
You save 5%
HELLA Alternator 14 V, 120 A Fendt, Valtra-Valmet
HELLA
Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal voltage (V): 14 More
Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal...
€531,65 €439,38 €427,40 €353,22
You save 20%
GRANIT Wheel brake cylinder K1, DOT 4 Valtra-Valmet Mezzo 6000-6900
€176,09 €145,53 €167,25 €138,22
You save 5%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€36,87 €30,47 €35,00 €28,93
You save 5%
Crankshaft seal for Ø 58 x 80 x 12 mm Massey Ferguson
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm. More
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm.
€14,80 €12,23
Cylinder head gasket engine Sisu 420
€146,11 €120,75 €138,80 €114,71
You save 5%
Door lock, right Fendt Farmer 240 S (Typ 294), GT 395
€54,33 €44,90 €51,60 €42,64
You save 5%
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.294,08 €1.069,49 €1.089,95 €900,79
You save 16%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.221,12 €1.009,19 €1.028,50 €850,00
You save 16%
BOSCH Sensor hydraulic pressure lifting height
BOSCH
Version: Lifting height. More
Version: Lifting height.
€355,33 €293,66 €314,26 €259,72
You save 12%
FLEETGUARD Hydraulic oil filter HF35322
€99,05 €81,86 €89,60 €74,05
You save 10%
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 210 ccm
No. of grooves: 2 | Nominal voltage (V): 12 | Connection: 7/8"" x 3/4"", vertical | Oil quantity (ccm): 210 | Suitable oil: PAG 46 | Fixing: EM | Pull... More
No. of grooves: 2 | Nominal voltage (V): 12 | Connection: 7/8"" x 3/4"...
€409,17 €338,16 €388,70 €321,24
You save 5%
MAHLE Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
MAHLE
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø (mm): - | Additional information: Compact alternator, dust-tight | Mounting L /... More
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø...
€372,69 €308,01 €232,90 €192,48
You save 38%
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
DANA Spicer
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120 More
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€44,85 €37,07 €42,60 €35,21
You save 5%
Showing 25 - 48 of 132

Valtra N 141 parts for engine, cooling and electrics

On a Valtra N 141, much of the work happens under the bonnet. A good share of the more than 130 parts on this page concern the engine and its surroundings: a remanufactured turbocharger, the seal between exhaust manifold and turbo, engine seal kits, crankshaft seals and cylinder head bolts. For cooling and climate there are radiator hoses and air conditioning compressors.

Working on the turbo and cylinder head

When you fit a turbocharger, always renew the manifold seal at the same time. An old gasket that has already been compressed once will not seal properly, and an exhaust leak at the turbo costs pulling power and coats the engine bay in soot. Check the oil feed and return lines for dirt or kinks, and pour a little clean engine oil into the turbo oil inlet before the first start. Then let the engine idle first, so the bearings are lubricated before you open the throttle.

Any work on the cylinder head calls for new cylinder head bolts. They are loaded into their stretch range when tightened and cannot be reused reliably. Tighten them in the prescribed order and in several stages.

Cab, lights and hitching

Outside the engine bay you will find cab door locks, flasher units, headlights, including LED headlights with dipped and main beam, and flood beam work lamps. For the driver there are GRAMMER tractor seats. At the rear there are ball drawbars and separate balls, from makers such as Scharmüller and Walterscheid. A stiff door lock often gets a second life with a little penetrating oil and some working back and forth. Only replace it when the latch no longer catches. If an indicator suddenly flashes at double speed, a bulb has usually failed. If nothing flashes at all while bulbs and fuse are fine, the flasher unit is the first suspect.

The right part for your N 141

Check the type plate to confirm that it really is an N 141, and keep the old part next to you. The reference number on a turbocharger, compressor or headlight is the quickest way to the matching replacement. With hoses, shape matters: a radiator hose for the top connection has a different bend from the one for the bottom.

From the same N range, the Valtra N 91, Valtra N 101, Valtra N 111 and Valtra N 121 each have their own page with the parts for that model. To look further across the brand, go to Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart