Narrow your search for the Valtra N 142 of the N2 series: more than 110 matching parts, such as trailer couplings, lighting and electrics.
The Valtra N 142 spends plenty of time on the road between fields, which puts brakes, lights and the hitch high on the list of things to keep in order. More than 110 parts for this tractor are collected here, from GRANIT, DANA Spicer, Scharmüller, Walterscheid and BOSCH.
Headlights, LED headlights and work lamps with a flood beam make sure you can see and be seen. Door locks are available to keep the N 142 cab secure. If a headlight lens is clouded or cracked, water gets in and the reflector corrodes, so it is worth replacing the whole unit rather than the bulb alone.
The brake system is covered with wheel brake cylinders, master brake cylinders and repair kits. Replace wheel cylinders one axle at a time, left and right together, so the tractor stays straight under hard braking. Bleed the system afterwards, starting at the cylinder furthest from the master cylinder.
Under the bonnet there is a Reman turbocharger, a seal for the exhaust manifold at the turbo, a rear crankshaft seal, thermostats and O-rings, for instance for the oil filler cap. When you fit a turbocharger, pour a little clean engine oil into the oil inlet and turn the wheel by hand before connecting it, then let the engine idle for a moment. That way the bearings never run dry.
For towing there are drawbars with a ball, separate balls and adapter plates.
Your type plate confirms the model. Valtra built several similar looking tractors in the N series, so the reference number on the old part is the safest guide. On a brake cylinder it is usually on the housing, and on a turbocharger it sits on a small plate at the side. Match it against the information given with the product.
Two other models from the same series have their own pages with the parts that fit them: Valtra N 92 and Valtra N 122. Useful if more than one Valtra works on your farm. The rest of the range, including older Valmet tractors, is reached through Valtra parts.
After fitting new headlights, set the beam against a wall so you do not dazzle oncoming traffic. On the ball hitch, check the ball for wear at every service and keep it lightly greased, because a worn ball lets the trailer knock against the hitch each time you pull away.