Menu
EUR

Valtra T 160 tractor parts & technical data

We have lined up more than 160 parts for the Valtra T 160 from the T series. Trailer couplings, electrics and lighting are easy to find by product group.

154 parts found for Valtra-Valmet T 160
Show:
Thermostat Ø 54 mm, 79 °C
Ø: 54 mm. Temperature: 79 °C. More
Ø: 54 mm. Temperature: 79 °C.
€18,95 €15,66
Optibelt Powerband multi-rib belt 8 ribs Massey Ferguson, New Holland
€66,79 €55,20 €63,45 €52,44
You save 5%
Piston ring set 3 rings Ø 108 mm, 3 mm trapezoidal ring / 3 mm / 4 mm
Dimensions: 3 rings, Ø 108 mm, 3 mm (trapezoidal ring) / 3 mm / 4 mm. More
Dimensions: 3 rings, Ø 108 mm, 3 mm (trapezoidal ring) / 3 mm / 4 mm.
€46,69 €38,59 €44,35 €36,65
You save 5%
Intake manifold gasket Massey Ferguson, Case IH, Steyr, New Holland
GRANIT Cylinder head gasket engine Sisu
€79,42 €65,64 €75,40 €62,31
You save 5%
GRANIT Water alarm
€57,33 €47,38 €54,45 €45,00
You save 5%
Door lock, right Massey Ferguson, Case IH, Steyr
€47,50 €39,26 €45,10 €37,27
You save 5%
GRANIT Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
GRANIT
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: white. Connection: Blade terminal... More
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 ...
€26,20 €21,65
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
Scharmüller
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version: Standard | Colour: AGCO grey | Load capacity (t): 3 | Length (mm): 4... More
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual...
€950,65 €785,66
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Scharmüller
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail width (mm): 200 | D-value (kN): 10 | Colour: Black | Detent pin Ø (mm): ... More
Version: Standard | Category: Bearing supports | Guide width (mm): 25 ...
€643,75 €532,02
Wiper motor Massey Ferguson, Valtra-Valmet
€213,99 €176,85 €203,25 €167,98
You save 5%
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
CARLISLE
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth More
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€13,18 €10,89 €12,50 €10,33
You save 5%
DANA Spicer O-ring as front axle 745, 4 g
€16,85 €13,93
DANA Spicer O-ring differential front axle 755, 1 g
DANA Spicer Plug front axle 745
€19,40 €16,03
Ball joint 210 mm, M22 x 1,5 mm, M24 x 1,5 mm
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. More
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm.
€59,73 €49,36 €56,70 €46,86
You save 5%
Wheel brake cylinder Ø 34,92 mm, DOT 4, with piston rod Steyr 667, 680
Medium: DOT4. Hole Ø: 34.92 mm. Additional information: With piston rod. More
Medium: DOT4. Hole Ø: 34.92 mm. Additional information: With piston r...
€171,88 €142,05 €163,25 €134,92
You save 5%
GRANIT Brake disc Ø 224 mm, 27 teeth, 4,8 mm thick, organic Valtra-Valmet
GRANIT
Dimensions: Ø 224, 4.8 thick, 27 splines mm. More
Dimensions: Ø 224, 4.8 thick, 27 splines mm.
€72,12 €59,60 €68,50 €56,61
You save 5%
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 x 80 mm. Guide width: 30 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pat...
€664,77 €549,40 €587,90 €485,87
You save 12%
Showing 49 - 72 of 154

Valtra T 160 parts

On a Valtra T 160 the hardest working parts sit around the engine. That is why a reman turbocharger, water pumps, thermostats and gaskets are among the more than 160 parts that fit this tractor, together with cab parts, lighting and a drawbar. They are supplied by GRANIT, Scharmüller, DANA Spicer, Walterscheid and GRAMMER.

Turbocharger and charge air

Besides the turbo there are hose elbows running to the intercooler. A replacement turbo lasts longest if you prime it with clean engine oil before the first start and check the oil feed pipe for dirt or kinks. Let the engine idle for a while before putting it under load. Check the intercooler hoses at the same time, as a split hose makes the turbo work harder than it needs to.

Cooling and engine

  • water pumps
  • thermostats and thermostat gaskets
  • valve cover gaskets
  • seals, for example for the lubrication line
  • O-rings for the feed pump and engine sensors

When you fit a new thermostat, always use a new gasket and bleed the cooling system after filling. An air pocket around the thermostat will otherwise make the temperature gauge wander.

A water pump often announces its end with a few drops from the weep hole or a bearing that starts to whine. Do not leave it too long, as a seizing pump can throw the belt. Fit a new gasket with the new pump and refill the system with fresh coolant of the correct type.

Cab, lights and hitch

For the cab there are door locks, air suspended tractor seats, headlights, work lamps and a flasher unit. At the back, a drawbar with ball for the hitch rail fits.

A sticky door lock can sometimes be freed with a little penetrating oil, but once the latch no longer catches, a new lock is the safe choice. A door swinging open on the move is dangerous and gets damaged itself. If the indicators flash too fast or not at all, check the bulbs and the earth before replacing the flasher unit.

Ordering for the T 160

Check the type plate to confirm it is a T 160. On a turbocharger or water pump the number is usually on a tag or cast into the housing, so compare it with the product details first. For a door lock, check if the left or the right one has failed.

The Valtra T series

These T models have their own pages too:

For all other Valtra and Valmet tractors, start at Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart