Menu
EUR

Valtra T 203 tractor parts & technical data

With a Valtra T 203 from the T3 series you are in the right place. Find more than 110 parts that fit, including trailer couplings, lighting and electrics.

118 parts found for Valtra-Valmet T 203
Show:
Heating element
€233,98 €193,37 €222,25 €183,68
You save 5%
Engine preheater, complete connection Ø 40 mm, press
Connection: Ø 40 mm press fitting. More
Connection: Ø 40 mm press fitting.
€427,72 €353,49 €406,30 €335,79
You save 5%
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€561,80 €464,30
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.058,75 €875,00 €873,45 €721,86
You save 18%
GRANIT Rail pressure valve Valtra-Valmet N 104 - T 234, Massey Ferguson
€142,86 €118,07 €135,70 €112,15
You save 5%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€36,87 €30,47 €35,00 €28,93
You save 5%
Door lock, right Fendt Farmer 240 S (Typ 294), GT 395
€54,33 €44,90 €51,60 €42,64
You save 5%
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.294,08 €1.069,49 €1.089,95 €900,79
You save 16%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.221,12 €1.009,19 €1.028,50 €850,00
You save 16%
BOSCH Sensor hydraulic pressure lifting height
BOSCH
Version: Lifting height. More
Version: Lifting height.
€355,33 €293,66 €314,26 €259,72
You save 12%
BOSCH Fuel pre-filter line filter D 37 mm, H 105 mm, connection 6 mm
BOSCH
C (mm): 35 | F: 6 | D (mm): 37 | H (mm): 105 | Height (mm): 105 | Version: Leitungsfilter | G (mm): 6 | Additional information: Typformel: F4058 | Ø ... More
C (mm): 35 | F: 6 | D (mm): 37 | H (mm): 105 | Height (mm): 105 | Vers...
€3,83 €3,17
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
DANA Spicer
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120 More
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€44,85 €37,07 €42,60 €35,21
You save 5%
Starter ring gear Ø 405/373 mm, 133 teeth Valtra-Valmet
Version: Ø 405/373 mm, 133 teeth. More
Version: Ø 405/373 mm, 133 teeth.
€215,16 €177,82 €204,40 €168,93
You save 5%
GRANIT Installation cable mini-contact plug 1 m
GRANIT
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510. More
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510.
€163,94 €135,49 €155,70 €128,68
You save 5%
Borg Warner Fan clutch M30 x 2 L, Ø 152,4 mm Valtra-Valmet
Borg Warner
Thread: M30 x 2 L. PCD: 152,4 mm. More
Thread: M30 x 2 L. PCD: 152,4 mm.
€615,55 €508,72
Thermostat Ø 54 mm, 79 °C
Ø: 54 mm. Temperature: 79 °C. More
Ø: 54 mm. Temperature: 79 °C.
€18,95 €15,66
GRANIT Cylinder head gasket engine Sisu
€79,42 €65,64 €75,40 €62,31
You save 5%
Door lock, right Massey Ferguson, Case IH, Steyr
€47,50 €39,26 €45,10 €37,27
You save 5%
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
Scharmüller
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version: Standard | Colour: AGCO grey | Load capacity (t): 3 | Length (mm): 4... More
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual...
€950,65 €785,66
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Scharmüller
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail width (mm): 200 | D-value (kN): 10 | Colour: Black | Detent pin Ø (mm): ... More
Version: Standard | Category: Bearing supports | Guide width (mm): 25 ...
€643,75 €532,02
Showing 25 - 48 of 118

Valtra T 203 parts with a focus on cooling

When the temperature gauge on a Valtra T 203 starts climbing under load, the cooling system is the first place to look. This page lists more than 110 replacement parts for the T 203, from thermostats and the fan clutch to headlights and a cab door lock. They come from GRANIT, Scharmüller, DANA Spicer, Walterscheid, BOSCH and others.

Tracking down overheating

Work through the system in order. A faulty thermostat often sticks half closed. Next, look at the fan clutch: if the cooling fan barely turns when the engine is hot, the clutch is no longer engaging properly. Check the tensioning pulley as well, because a slipping belt slows down both the fan and the water pump. A temperature sensor giving a false reading can also send you in the wrong direction, so verify with a separate measurement if in doubt.

  • Thermostats
  • Fan clutch and cooling fan
  • Tensioning pulley
  • Temperature sensor
  • Radiator hoses

Lights, cab and seals

For lighting there are headlights, an LED headlight and work lamps, and for the cab a door lock. Seals and gaskets include a gasket for the silencer at the turbocharger, seals for a pressure pipe and an O-ring for the oil filler cap. At the rear you can fit a ball type drawbar, and separate balls are available as well.

Finding the correct part

Your type plate confirms the machine is a T 203. Compare the reference number on the old part with the details shown for the item. On a thermostat that number is often stamped on the rim.

Headlights and ball hitch care

If you are thinking of switching to an LED headlight, check first that the connector and mounting match the existing lamp, so nothing needs to be modified. An LED unit draws less current and has no filament to break from vibration. On a ball type drawbar, a thin film of grease on the ball is enough to keep wear on ball and coupling down. Wipe off old grease mixed with grit regularly, because that mixture acts like grinding paste.

When you replace the thermostat, take a close look at the radiator hoses too, and renew any hose that has swollen or split at the clip.

Other Valtra T tractors

These models from the same range each have their own page: Valtra T 213, Valtra T 163 and Valtra T 153. Handy if you run more than one Valtra. For the complete line up of the make, visit Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart