Menu
EUR

Valtra 505 tractor parts & technical data

Whether yours says Valtra 505 or Valmet 505, this page lists more than 60 matching parts for the electrics, steering and front axle, and the engine.

68 parts found for Valtra-Valmet 505
Show:
Installation cable mini-contact plug 1 m
8%
Installation cable mini-contact plug 1 m
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510.
€171,07 €141,38 €157,38 €130,07
 
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
8%
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€124,12 €102,58 €114,19 €94,37
 
Engine preheater, complete thread 18 x 1,5 mm
8%
Engine preheater, complete thread 18 x 1,5 mm
Connection: thread 18 x 1.5 mm.
€244,31 €201,91 €224,77 €185,76
 
Starter motor 12 V, 3,0 kW, 11 teeth, 229,5 mm, Ø 89 mm
8%
Starter motor 12 V, 3,0 kW, 11 teeth, 229,5 mm, Ø 89 mm
€315,38 €260,64 €290,15 €239,79
 
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
8%
Cobo
Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning lig...
€58,12 €48,03 €53,47 €44,19
 
MAHLE Starter motor 12 V, 3,0 kW, 11 teeth, mounting Ø 89 mm, mounting angle r 45
40%
MAHLE
Starter motor 12 V, 3,0 kW, 11 teeth, mounting Ø 89 mm, mounting angle r 45
€505,95 €418,14 €303,03 €250,44
 
Clutch plate 310 sintered 41 x 45 mm, 22 splines Valtra-Valmet
8%
Clutch plate 310 sintered 41 x 45 mm, 22 splines Valtra-Valmet
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Sintered clutch l...
€221,34 €182,93 €203,63 €168,29
 
Feed pump 3 hole, 50 x 34 mm, roller 23 mm Mercedes Benz, Valtra-Valmet
8%
Feed pump 3 hole, 50 x 34 mm, roller 23 mm Mercedes Benz, Valtra-Valmet
Version: 3 holes, Vertical hole spacing: 50 mm, Horizontal hole spacing: 34 mm, ...
€45,33 €37,46 €41,70 €34,47
 
LUK Thrust bearing driving clutch 60 x 97 x 26 Fendt, Landini, Valtra-Valmet
8%
LUK
Thrust bearing driving clutch 60 x 97 x 26 Fendt, Landini, Valtra-Valmet
Dimensions (mm): 60 x 97 x 26
€121,34 €100,28 €111,63 €92,26
 
MAHLE Alternator 14 V, 65 A, pulley-Ø 80 mm, form A
40%
MAHLE
Alternator 14 V, 65 A, pulley-Ø 80 mm, form A
Pulley Ø (mm): 80.0 | Charging current (A): 65 | Form: A | Pulley spacing (mm): ...
€234,35 €193,68 €140,36 €116,00
 
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
40%
MAHLE
Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€548,46 €453,27 €328,50 €271,49
 
Starter motor with reduction 12 V, 2,7 kW, 11 teeth, 193 mm, Ø 89 mm
8%
Starter motor with reduction 12 V, 2,7 kW, 11 teeth, 193 mm, Ø 89 mm
€247,59 €204,62 €227,78 €188,25
 
Master brake cylinder K1, DOT 4, Valtra-Valmet, Case IH
8%
Master brake cylinder K1, DOT 4, Valtra-Valmet, Case IH
Description: K1.
€137,83 €113,91 €126,80 €104,80
 
Alternator 14 V / 65 A, form A, flange 86,0 mm, pulley-Ø 90,0 mm
8%
Alternator 14 V / 65 A, form A, flange 86,0 mm, pulley-Ø 90,0 mm
To fit as: Ford, Lindner, Valtra-Valmet
€239,13 €197,63 €220,00 €181,82
 
Hydraulic pump double 22,5 + 12 cm³ Valtra-Valmet 505 - 905
8%
Hydraulic pump double 22,5 + 12 cm³ Valtra-Valmet 505 - 905
Output volume (cc/rev): 22,5 + 12
€837,13 €691,84 €770,16 €636,50
 
Alternator 14 V / 65 A, flange 86 mm, pulley Ø 90 mm
8%
Alternator 14 V / 65 A, flange 86 mm, pulley Ø 90 mm
Flange size (mm): 86,0 | Belt tension hole Ø / R (mm): M8 / 86,0 | Mounting L / ...
€152,63 €126,14 €140,42 €116,05
 
Heating element engine preheater SAME, Hürlimann, Lamborghini
8%
Heating element engine preheater SAME, Hürlimann, Lamborghini
€218,74 €180,78 €201,24 €166,31
 
Connection cable MS with LED light, 2,5 m
8%
Connection cable MS with LED light, 2,5 m
Length: 2.5 m. Version: The connection cable with LED light makes it much easier...
€100,09 €82,72 €92,08 €76,10
 
Radiator hose, top inner-Ø 40 mm Valtra-Valmet Mezzo 6000-6800
8%
Radiator hose, top inner-Ø 40 mm Valtra-Valmet Mezzo 6000-6800
Inner Ø: 40 mm.
€51,59 €42,64 €47,46 €39,23
 
Oil sump gasket Valtra-Valmet, Fendt engine 309D, 309DS, 311DS
8%
Oil sump gasket Valtra-Valmet, Fendt engine 309D, 309DS, 311DS
Description: Only fits 505, 605.
€46,05 €38,06 €42,37 €35,01
 
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 4...
€48,67 €40,22 €44,78 €37,01
 
Clutch plate single clutch 1020 - 1140 Kp, flywheel flat
8%
Clutch plate single clutch 1020 - 1140 Kp, flywheel flat
Contact pressure (Kp): 1020 - 1140 | Flywheel design: Flat | Additional informat...
€225,76 €186,58 €207,70 €171,65
 
Radiator Valtra-Valmet 505-855, engine Sisu 311, 411
8%
Radiator Valtra-Valmet 505-855, engine Sisu 311, 411
To fit as: Valtra-Valmet Engine Sisu: 311, 411; Series 05: 505, 605, 705, 805; S...
€581,76 €480,79 €535,22 €442,33
 
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€33,85 €27,98
 
Cylinder head gasket Valtra-Valmet 205-605
8%
Cylinder head gasket Valtra-Valmet 205-605
Description: Only fits 505, 605.
€47,03 €38,87 €43,27 €35,76
 
Injection nozzle Valtra-Valmet 205-855
8%
Injection nozzle Valtra-Valmet 205-855
Type formula: DLLA150S804, 0433271856.
€40,77 €33,69 €37,51 €31,00
 
Feed pump 3 hole, 52 x 34 mm, lever 23 mm Valtra-Valmet
8%
Feed pump 3 hole, 52 x 34 mm, lever 23 mm Valtra-Valmet
Version: 3 holes, Vertical hole spacing = 52 mm, Horizontal hole spacing = 34 mm...
€63,07 €52,12 €58,02 €47,95
 
Stop cable 2015 / 2250 mm Valtra-Valmet 205-905, 6000-8750
Stop cable 2015 / 2250 mm Valtra-Valmet 205-905, 6000-8750
To fit as: Valtra - Valmet 205, 305, 365, 405, 465, 505, 600, 605, 665, 700, 705...
€34,18 €28,24
 
Ball joint taper 16,2 - 18,3 mm, length 100 mm, M14 x 1,5, M22 x 1,5 L
8%
Ball joint taper 16,2 - 18,3 mm, length 100 mm, M14 x 1,5, M22 x 1,5 L
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 L mm. E: 16,2 mm. F: 18,3 mm. Taper: 16...
€71,69 €59,25 €65,95 €54,51
 
Ball joint taper 20 - 22,2 mm, M18 x 1,5, M24 x 1,5 L, 106 mm
8%
Ball joint taper 20 - 22,2 mm, M18 x 1,5, M24 x 1,5 L, 106 mm
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 L mm. E: 20 mm. F: 22,2 mm. Taper: 20 -...
€60,06 €49,64 €55,26 €45,67
 
Connection cable 2,5 m
8%
Connection cable 2,5 m
Length: 2.5 m. Reference no.: 1762625.
€83,20 €68,76 €76,54 €63,26
 
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
8%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C.
€38,47 €31,79 €35,39 €29,25
 
Inlet valve engine Sisu 311-611 Valtra-Valmet
8%
Inlet valve engine Sisu 311-611 Valtra-Valmet
€113,89 €94,12 €104,78 €86,59
 
Valve Valtra-Valmet 355-1203
8%
Valve Valtra-Valmet 355-1203
€99,04 €81,85 €91,12 €75,30
 
Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade...
€27,39 €22,63
 
Ball joint right and left M16 x 1,5, M24 x 1,5, taper 18 - 20 mm
8%
Ball joint right and left M16 x 1,5, M24 x 1,5, taper 18 - 20 mm
A: 105 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18 mm. F: 20 mm. Taper: 18 - 20 ...
€39,87 €32,95 €36,68 €30,31
 
Ball joint 522 mm, M16 x 1,5, 22 mm
8%
Ball joint 522 mm, M16 x 1,5, 22 mm
A: 522 mm. C: M16 x 1,5 mm. D: 22 mm. E: 18 mm. F: 20,2 mm. Taper: 18 - 20,2 mm.
€69,02 €57,04 €63,50 €52,48
 
Repair set brake cylinder Valtra-Valmet, Fendt
8%
Repair set brake cylinder Valtra-Valmet, Fendt
€39,37 €32,54 €36,22 €29,93
 
O-clamp set 115 x 3,5 mm Steyr, Massey Ferguson - 3 pieces
8%
O-clamp set 115 x 3,5 mm Steyr, Massey Ferguson - 3 pieces
Dimensions: All rings 115 x 3.5 mm.
€35,00 €28,93 €32,20 €26,61
 
HELLA Headlight left / right 12 / 24 V, H4, glass 164 x 103 mm, built-in Fendt
4%
HELLA
Headlight left / right 12 / 24 V, H4, glass 164 x 103 mm, built-in Fendt
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK / T4W. Fixing: 3-poin...
€107,20 €88,60 €103,23 €85,32
 
Ball joint 100 mm, taper 16,2 - 18,3 mm, M14 x 1,5, M22 x 1,5
8%
Ball joint 100 mm, taper 16,2 - 18,3 mm, M14 x 1,5, M22 x 1,5
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2...
€71,69 €59,25 €65,95 €54,51
 
Ball joint 205 mm, M20 x 1,5, M22 x 1,5, taper 23,5 - 26,2 mm
8%
Ball joint 205 mm, M20 x 1,5, M22 x 1,5, taper 23,5 - 26,2 mm
A: 205 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,2 mm. Taper: 23,5...
€73,47 €60,72 €67,59 €55,86
 
Axial joint 205 mm, M22 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
8%
Axial joint 205 mm, M22 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
A: 205 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm.
€81,60 €67,44 €75,07 €62,04
 
Ball joint 220 mm, M22 x 1,5, M22 x 1,5, taper 23,5 - 26,4 mm
8%
Ball joint 220 mm, M22 x 1,5, M22 x 1,5, taper 23,5 - 26,4 mm
A: 220 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,4 mm. Taper: 23,5...
€82,92 €68,53 €76,29 €63,05
 
Wheel brake cylinder Ø 34,92 mm, DOT 4, with piston rod Steyr 667, 680
8%
Wheel brake cylinder Ø 34,92 mm, DOT 4, with piston rod Steyr 667, 680
Medium: DOT4. Hole Ø: 34.92 mm. Additional information: With piston rod.
€179,36 €148,23 €165,01 €136,37
 
Repair set clutch cylinder Valtra-Valmet, Steyr
8%
Repair set clutch cylinder Valtra-Valmet, Steyr
€54,42 €44,98 €50,07 €41,38
 
Showing 1 - 48 of 68

Valtra 505 parts to keep an old Valmet working

The Valtra 505, still known to many owners as the Valmet 505, is the kind of tractor you can work on yourself, and with the right parts it keeps earning its place in the yard. This page lists more than 60 replacement parts for it, from GRANIT, MAHLE, Cobo, HELLA and LUK.

Brakes and steering

Steering ball joints wear on any older tractor, and play in the linkage shows up straight away on the road. For the brakes there are wheel brake cylinders and repair kits for the brake cylinder. A repair kit is worth fitting while the bore is still smooth. If you see rust or scoring, go for a new cylinder instead. Bleed the brakes carefully afterwards, starting with the wheel furthest from the master cylinder.

Engine and fuel

On the engine side you will find oil sump gaskets, crankshaft seals, coolant seals and radiator hoses. When replacing a crankshaft seal, take care not to mark the running surface while removing the old one, and lightly grease the lip of the new seal before fitting. The feed pump supplies diesel to the injection pump. After changing it, bleed the fuel system or the engine will not fire. A stop cable is listed too, for when the old one has become stiff.

Starting, charging and lights

Starter motors, alternators, connection cables, a flasher unit and a headlight keep the electrics in order. If the indicators suddenly flash twice as fast, a blown bulb is the usual cause rather than the flasher unit. For the clutch there are clutch plates, including ones from LUK.

On a tractor of this age the clutch plate has often been replaced before. If it is due again, inspect the flywheel for scoring and heat marks and check the pressure plate and release bearing at the same time. A new plate on a damaged flywheel will soon slip again. Centre the plate with an alignment tool when fitting it, so the input shaft slides in without force when the tractor goes back together, and give the splines the thinnest smear of grease.

Valmet or Valtra, and the sister models

The type plate tells you which name the tractor left the factory with and exactly which model it is. With the old part in your hand, compare the reference number on it with the product description. On older machines something has often been replaced before, and then that number is more reliable than the model alone.

The 505 belongs to the same line as the Valtra 605, Valtra 705 and Valtra 805, each with a page of its own. For the rest of the Valtra and Valmet line up, head to Valtra parts.

Brands
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart