Menu
EUR

Valtra 6100 tractor parts & technical data

The Valtra 6100, also known as the Valmet 6100, belongs to the Mezzo series. Here you will find more than 110 parts for lighting, steering and electrics.

120 parts found for Valtra-Valmet 6100
Show:
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 ...
€638,19 €527,43
 
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
8%
LED headlight dipped beam / main beam 12 / 24 V, 167 x 107 x 78 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€124,12 €102,58 €114,19 €94,37
 
DANA Spicer Plug front axle 745
DANA Spicer
Plug front axle 745
€20,26 €16,75
 
MANN-FILTER Fuel filter WK731
MANN-FILTER
Fuel filter WK731
€10,74 €8,87
 
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
4%
Scharmüller
Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000...
€1.275,80 €1.054,38 €1.223,74 €1.011,36
 
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
8%
Wabco
Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10
€630,05 €520,70 €579,65 €479,05
 
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: c...
€16,13 €13,33
 
Gear wheel main shaft 31 teeth Valtra-Valmet
8%
Gear wheel main shaft 31 teeth Valtra-Valmet
Number of teeth: 31.
€423,24 €349,79 €389,38 €321,80
 
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
8%
Cobo
Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: ...
€32,65 €26,98 €30,04 €24,82
 
VDO Coolant temperature sensor M14 x 1,5, +40 - +120 °C, 98 °C
8%
VDO
Coolant temperature sensor M14 x 1,5, +40 - +120 °C, 98 °C
Version: Temperature measuring range: +40°C to +120°C, Thread: M14 x 1.5, Resist...
€162,00 €133,88 €149,04 €123,17
 
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
8%
Scharmüller
Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version...
€987,09 €815,78 €908,12 €750,51
 
Wiper motor Massey Ferguson, Valtra-Valmet
8%
Wiper motor Massey Ferguson, Valtra-Valmet
€223,30 €184,55 €205,44 €169,78
 
Filter dryer Ø 76 mm, 228 mm, connection thread M
8%
Filter dryer Ø 76 mm, 228 mm, connection thread M
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O-ring B = m...
€63,79 €52,72 €58,69 €48,50
 
Expansion valve airco 1/2 inch o-ring, 35 g
8%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Co...
€54,07 €44,69 €49,74 €41,11
 
LUK Clutch plate TZFA organic torsiegeveerd 41 x 45 mm, 22 splines
8%
LUK
Clutch plate TZFA organic torsiegeveerd 41 x 45 mm, 22 splines
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Organic clutch li...
€519,27 €429,15 €477,73 €394,82
 
DANA Spicer O-ring differential front axle 745, 2 g
DANA Spicer
O-ring differential front axle 745, 2 g
€2,33 €1,92
 
Gear wheel planetary set rear axle 82 teeth Valtra-Valmet
8%
Gear wheel planetary set rear axle 82 teeth Valtra-Valmet
Number of teeth: 82.
€894,96 €739,64 €823,36 €680,47
 
Coupling sleeve transmission-input shaft Valtra-Valmet
8%
Coupling sleeve transmission-input shaft Valtra-Valmet
€255,14 €210,86 €234,73 €193,99
 
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
8%
Cobo
Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning lig...
€58,12 €48,03 €53,47 €44,19
 
FTE Clutch master cylinder Ø 25,4 mm, DOT4, gray cast iron Valtra-Valmet
8%
FTE
Clutch master cylinder Ø 25,4 mm, DOT4, gray cast iron Valtra-Valmet
Material: Grey cast iron | Hole Ø (mm): 25.4 | Medium: DOT4 | Additional informa...
€209,23 €172,92 €192,49 €159,08
 
MAHLE Starter motor 12 V, 3,0 kW, 11 teeth, mounting Ø 89 mm, mounting angle r 45
40%
MAHLE
Starter motor 12 V, 3,0 kW, 11 teeth, mounting Ø 89 mm, mounting angle r 45
€505,95 €418,14 €303,03 €250,44
 
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
8%
Scharmüller
Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 ...
€583,34 €482,10 €536,67 €443,53
 
MAHLE Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
40%
MAHLE
Alternator 14 V, 120 A, flange 56 mm, compact, dust-tight
Direction of rotation: ↻ | Installation angle (°): l 30 | Pulley Ø (mm): - | Add...
€388,90 €321,41 €232,93 €192,50
 
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
8%
SANDEN
Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves Valtra-Valmet
Oil quantity (ccm): 135 | Suitable oil: SP - 10 | Refrigerant: R 134a | Connecti...
€586,48 €484,69 €539,56 €445,92
 
Clutch plate 330 Z organic 41 x 45 mm, 22 splines Valtra-Valmet
8%
Clutch plate 330 Z organic 41 x 45 mm, 22 splines Valtra-Valmet
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Organic clutch li...
€404,62 €334,40 €372,25 €307,65
 
LUK Central release bearing 2 connections 45,5 x 95 x 105 mm
8%
LUK
Central release bearing 2 connections 45,5 x 95 x 105 mm
Dimensions (mm): 45.5 x 95 x 105
€486,06 €401,70 €447,18 €369,57
 
LUK Thrust bearing driving clutch 60 x 97 x 26 Fendt, Landini, Valtra-Valmet
8%
LUK
Thrust bearing driving clutch 60 x 97 x 26 Fendt, Landini, Valtra-Valmet
Dimensions (mm): 60 x 97 x 26
€121,34 €100,28 €111,63 €92,26
 
LUK Clutch plate UZF organic 41 x 45 mm, 22 splines Valtra-Valmet
8%
LUK
Clutch plate UZF organic 41 x 45 mm, 22 splines Valtra-Valmet
Material specifications: Organic clutch lining | Dimensions (mm): 41 x 45 22 gro...
€509,22 €420,84 €468,48 €387,18
 
MAHLE Alternator 14 V, 65 A, pulley-Ø 80 mm, form A
40%
MAHLE
Alternator 14 V, 65 A, pulley-Ø 80 mm, form A
Pulley Ø (mm): 80.0 | Charging current (A): 65 | Form: A | Pulley spacing (mm): ...
€234,35 €193,68 €140,36 €116,00
 
DANA Spicer O-ring differential front axle 755, 1 g
DANA Spicer
O-ring differential front axle 755, 1 g
€0,76 €0,63
 
Master brake cylinder K1, DOT 4, Valtra-Valmet, Case IH
8%
Master brake cylinder K1, DOT 4, Valtra-Valmet, Case IH
Description: K1.
€137,83 €113,91 €126,80 €104,80
 
Synchro ring reversing gear Valtra-Valmet
8%
Synchro ring reversing gear Valtra-Valmet
€521,59 €431,07 €479,86 €396,58
 
LUK Clutch plate TDCA sintered 41 x 45 mm, 22 splines Valtra-Valmet
8%
LUK
Clutch plate TDCA sintered 41 x 45 mm, 22 splines Valtra-Valmet
Dimensions (mm): 41 x 45 22 grooves | Material specifications: Sintered clutch l...
€520,71 €430,34 €479,05 €395,91
 
Ball head with female thread 23,5 - 26,5 mm, M22 x 1,5, 290 mm Valmet
8%
Ball head with female thread 23,5 - 26,5 mm, M22 x 1,5, 290 mm Valmet
E (mm): 23,5 | F (mm): 26,5 | A (mm): 290 | Taper (mm): 23,5 - 26,5 | D (mm): M2...
€107,98 €89,24 €99,34 €82,10
 
Scharmüller Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
8%
Scharmüller
Drawbar frame 10 kN, rail width 200 mm, nose weight 350 kg
Version: Standard | Category: Bearing supports | Guide width (mm): 25 | Rail wid...
€668,46 €552,45 €614,98 €508,25
 
PTO shaft end piece 1 3/8 inch, 6 splines Valtra-Valmet
8%
PTO shaft end piece 1 3/8 inch, 6 splines Valtra-Valmet
Version: 1 3/8"", 6 grooves
€206,82 €170,93 €190,27 €157,25
 
CARLISLE External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
CARLISLE
External plate Hi-Lo 1,5 mm, inner 98,9 mm, outer 142,5 mm, 6 teeth
Version: thickness = 1,5 mm inner = 98,9 mm outer = 142,5 mm 6 teeth
€17,19 €14,20
 
Clutch master cylinder Valtra-Valmet 6000 - 8750, N91, T120 - T171
8%
Clutch master cylinder Valtra-Valmet 6000 - 8750, N91, T120 - T171
€197,43 €163,17 €181,64 €150,11
 
DANA Spicer Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
8%
DANA Spicer
Spacer as front axle 745, outer-Ø 150 mm, inner-Ø 120 mm, 1 mm
Thickness (mm): 1 | Outer Ø (mm): 150 | Inner Ø (mm): 120
€46,81 €38,69 €43,07 €35,59
 
DANA Spicer Intermediate bush as front axle 745, 120 x 127 x 40 mm
8%
DANA Spicer
Intermediate bush as front axle 745, 120 x 127 x 40 mm
Dimensions (mm): 120 x 127 x 40 | Inner Ø (mm): 120 | Height (mm): 40 | Outer Ø ...
€140,42 €116,05 €129,19 €106,77
 
Radiator hose, top inner-Ø 40 mm Valtra-Valmet Mezzo 6000-6800
8%
Radiator hose, top inner-Ø 40 mm Valtra-Valmet Mezzo 6000-6800
Inner Ø: 40 mm.
€51,59 €42,64 €47,46 €39,23
 
Oil sump gasket Valtra-Valmet, Fendt engine 309D, 309DS, 311DS
8%
Oil sump gasket Valtra-Valmet, Fendt engine 309D, 309DS, 311DS
Description: Only fits 505, 605.
€46,05 €38,06 €42,37 €35,01
 
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
8%
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€77,66 €64,18 €71,45 €59,05
 
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 4...
€48,67 €40,22 €44,78 €37,01
 
Aircon compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil
8%
Aircon compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil
Reference no.: QP7H15-8024 | Suitable oil: PAG 46 | For compressor: 7H15 | Nomin...
€357,93 €295,81 €329,30 €272,15
 
Ball joint 295 mm, M24 x 1,5, M22 x 1,5, taper 29 - 32,2 mm
8%
Ball joint 295 mm, M24 x 1,5, M22 x 1,5, taper 29 - 32,2 mm
A: 295 mm. C: M24 x 1,5 mm. D: M22 x 1,5 mm. E: 29 mm. F: 32,2 mm. Taper: 29 - 3...
€103,69 €85,69 €95,39 €78,84
 
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€33,85 €27,98
 
Showing 1 - 48 of 120

Valtra 6100 and Valmet 6100 parts

Valmet on the bonnet, Valtra on the paperwork? For parts it makes no difference, because the Valtra 6100 is the same tractor as the Valmet 6100. This page lists more than 110 parts that fit it, from GRANIT, Scharmüller, DANA Spicer, LUK and MAHLE.

Engine and driveline

Around the engine there are valve cover gaskets, valve cover seals, a crankshaft seal and gaskets such as the one for the silencer. For the driveline you will find clutch plates and O-rings, for example for the differential. Repair kits let you overhaul a component instead of replacing it outright when the housing is still sound.

Steering, hitch and cab

The steering side has ball joints and separate balls. At the rear there is a ball drawbar. In the cab you will find door locks, and for lighting there are work lamps, indicator position lights and a flasher unit.

Clutch and lighting tips

Do not replace the clutch plate on its own if the pressure plate or release bearing is also worn. Look at the flywheel when it is out. Grooves or blue heat spots on the friction face mean it needs skimming or replacing, otherwise the new plate will judder or slip. If the indicators suddenly flash fast or not at all, check the bulbs and earth first and the flasher unit after that. A dab of contact grease on the plugs of work lamps and indicator lights keeps moisture and corrosion out. To feel play in a ball joint, rest your hand on it while someone turns the steering wheel back and forth.

A word on the stop cable

Stop cables are on this page as well. After fitting one, check that the engine shuts down fully with the cable pulled all the way out and that the cable springs back on its own. Route it without tight bends and give it a drop of oil now and then, so it keeps running smoothly and the engine does not carry on idling when you want it off.

Data plate and part numbers

The 6100 is part of the Mezzo series, which includes several models that look alike at first glance. The data plate settles it. With a clutch plate, also check the number printed on the plate and the spline count in the hub. With gaskets and seals, the old one is usually the best thing to compare against.

These tractors from the Mezzo series each have their own page:

For the brand as a whole, including newer Valtra tractors, go to Valtra parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart